Having Problems Extending Extreme with another Extreme as well as Express???

Extreme in Basement is (Extreme1)
Extreme in room is (Extreme 2)
Hi all! I have 2 AiportExtremes and a AiportExpress. I have (Extreme1) in my basement where it is connected to a modem with a cable. I selected the option EXTEND NETWORK and under Connection Sharing it is on SHARE A PUBLIC IP ADDRESS in Aiport Utility. The internet work and everything, but it is a bit weak upstairs. (Extreme1) is version 7.6.1, but it can be updated to 5.6.1. I hit update and nothing happens.... Why???
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10035-1.jpg[/IMG]
http://[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20pr obs/P1010036-1.jpg[/IMG]
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10037-1.jpg[/IMG]
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10040-1.jpg[/IMG]
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10041-1.jpg[/IMG]
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10044-1.jpg[/IMG]
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10045-1.jpg[/IMG]
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10047-1.jpg[/IMG]
I then wanted to put (Extreme2) in my room which was above the main floor to extend the connection. I connected a internet cable in (Extreme2) and the other side went into my Internet Wall Jack. After that, I connected a cable in my basement where my Internet Jack Box is to (Extreme 1.) That cable connected to the first Port of (Extreme 1) unless you count the modem cable so then it is in the 2nd Port.
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10027-1.jpg[/IMG]
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10028-1.jpg[/IMG]
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10029-1.jpg[/IMG]
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10031-1.jpg[/IMG]
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10038-1.jpg[/IMG]
I went through the process on (Extreme2) by clicking continue and I did the name of the router, password, and I checked off remember in keychain. I then clicked I WANT AIRPORT EXTREME TO JOIN MY CURRENT NETWORK. After that, I clicked I WANT TO CONNECT AIRPORT EXTREME TO MY NETWORK USING ETHERNET TO EXTEND MY EXISTING WIRELESS NETWORK. I picked the name of (Extreme1) which is BigDogRouter and I get the final menu of what I clicked. It didn't save the settings I hit, like I hit I WANT AIRPORT EXTREME TO JOIN MY CURRENT NETWORK and it said I hit CREATE A WIRELESS NETWORK. The thing is though, under Wirless Network Name it's the network name of (Extreme1.) So this it totally mest up... I hit update and about 1 minute later, everything went through, both routers went green, Airport Utility was trying to detect the routers and then the problem occured where both of the routers dissapeared on Airport Utility. I got a messgae saying it couldn't detect the devices. After that happened, I couldn't get the routers to show back up, but on my bottom right side of the computer where my networks are shown, (Extreme1) network is there having full bars, but it won't let me connect. I had to do a full factory reset on both routers to get (Extreme1) back up and running.
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10055-1.jpg[/IMG]
I then tried doing it manually. So i named it, password and checked off remember in key chain which is all under Base Station.
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10048-1.jpg[/IMG]
I went to Wirless, I cliked EXTEND WIRELESS NETWORK and I had to type in the wireless network name of (Extreme1.) I checked ALLOW WIRELESS CLIENTS as well as giving the router the same security as (Extreme1) which is WPA2 PERSONAL. I also gave it the same password.
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10050-1.jpg[/IMG]
Once that was done, I clicked Internet Connection. Connection Using had WIRELESS NETWORK selected. Under that, Connection Sharing had OFF (BRIDGE MODE) already selected as well. It wouldn't let me change Connection Useing and Connection Sharing.
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10051-1.jpg[/IMG]
I clicked update and the same exact thing happend as if I hit continue. I am totally confused and I have been trying to fix this problem for more than 2 months. If anyone has any ideas then please post up. I had a similar problem with my Express to, but I won't get into that till later.
Thanks!

Fixed the pics!
http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P1010035 -1.jpg
http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P1010036 -1.jpg
http://http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P 1010037-1.jpg
http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P1010040 -1.jpg
http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P1010041 -1.jpg
http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P1010044 -1.jpg
http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P1010045 -1.jpg
http://http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P 1010047-1.jpg
http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P1010027 -1.jpg
http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P1010028 -1.jpg
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10029-1.jpg[/IMG]
[IMG]http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P10 10031-1.jpg[/IMG]
http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P1010038 -1.jpg
http://http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P 1010055-1.jpg
http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P1010048 -1.jpg
http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P1010050 -1.jpg
http://i820.photobucket.com/albums/zz128/BajaManiac108/Internet%20probs/P1010051 -1.jpg
Message was edited by: JBoy108

Similar Messages

Having problems connecting Coldfusion10 with sql server express 2012

Hi,
I am having problems setting up a datasource for a local sql express 2012 server. Its running as the default instance. Connections are working with ODBC and client told just not Coldfusion.
When I try to set up a connection using the sql driver I get this error:
Connection verification failed for data source: Leaf
java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: 127.0.0.1:1433. Reason: Invalid argument: connect
The root cause was that: java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: 127.0.0.1:1433. Reason: Invalid argument: connect
When I try a Socket connection with an ODBC connection I setup in windows I get this error:
Connection verification failed for data source: LeafDB
java.sql.SQLException: [Macromedia][SequeLink JDBC Driver]Internal network error, connection closed.
The root cause was that: java.sql.SQLException: [Macromedia][SequeLink JDBC Driver]Internal network error, connection closed.
Any ideas?
Thanks,

Hi Rossco199,
The issue is likely caused by you not having yet assigned port 1433 in SQL Express itself. Follow the procedure described on the following page, and you should solve the problem: http://www.tensixconsulting.com/2012/02/sqlserverexception-the-tcpip-connection-to-the-hos t-port-1433-has-failed/
In particular, remember to assign port 1433 to 127.0.0.1 and to IPAll. Also set 'Active' and 'Enabled' to 'Yes' for the IP 127.0.0.1. While you're at it, if 'Named Pipes' is disabled, you should right-click on it and select 'enable'. Afterwards, restart the Windows service 'SQL Server(SQLEXPRESS)'.
It is advisable to allow ColdFusion server authentication. However, the SQL Express server is configured by default to allow only Windows authentication. This conflict may lead to errors.
Should you then encounter the dreaded Error 233: "No process is on the other end of the pipe", proceed as follows. Open the tool Microsoft SQL Server Management Studio. Right-click on the name of your database server, then on Properties. In the user interface that opens, click on Security. Select the combined 'SQL Server and Windows Authentication mode'. Restart the service 'SQL Server(SQLEXPRESS)'.

I have been having problems downloading apps with my cellular data. I try installing apps from the app store and when it starts loading it just stays loading for a while but all of a sudden it loads all the way and then it restarts It goes back to waiting

I have been having problems downloading apps with my cellular data. I try installing apps from the app store and when it starts loading it just stays loading for a while but all of a sudden it loads all the way and then it restarts. It goes back to waiting

https://discussions.apple.com/message/19584729#19584729

Is anyone else having problems downloading apps with the new iOS 7?

Is anyone else having problems downloading apps with the new iOS 7?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

I am having problems using Firefox with Ebay in the last 10 days. The advanced search link is dropping off the page and there is no way to access it now.

I have been using Firefox and Ebay for at least 12 years with no problems whatsoever. But in the last 10 days I have been having trouble with the Advanced Search link disappearing from the page on Ebay. If I do a search from the Ebay home page it will show the results, but the Advanced Search link (in blue letters) which always used to appear to the right of the Search button is gone. If I click Search again at this point I can see the Advanced Search link appear for a millisecond, but then disappear just as quickly. Also, if I refresh the page the same thing happens. I tried to duplicate this problem with Internment Explorer and it didn't occur, so it appears to be Firefox that is causing this issue. Of course when I contacted Ebay they told me my problem was that I wasn't using Internment Explorer! I love Firefox and do not want to switch!

You can try to clear the cache and cookies to see if that makes a difference:
<h3>Clearing Cache</h3>
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and uncheck everything else.
#Now click the ''Clear now'' button.
<h3>Clearing Cookies</h3>
#Go to Firefox > Tools > Privacy > Remove Individual Cookies
#Find the site (ebay.com) that's having problems and clear all cookies.
#Restart Firefox
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.

HT1430 Anyone having problems sending email with yahoo?

Is anyone having problems with yahoo mail? I can receive messages but haven't been able to send one for the last several hours.

Yahoo has had a randomly persistent issue for weeks. I went through two separate times of being unable to access one of my accounts. It usually cleared up in 24 hours or so. (Suggesting it's their servers that are creating the issue)
Have you tried to delete then readd the account?

Equium A100-027 PSAAQ - having problems accessing Internet with WLan

Just installed WXP on my Equium A100-027 (PSAAQ) as Vista did not like. Now am having problems accessing Internet. What drivers do I need to download and how do I install them?
Thanks.

Hi,
I would suggest you to check the driver site of toshiba
-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
search for your machine and download the wlan drivers. If you dont know which one you need just download all of them and install em, one of that drivers MUST work. ;)
Greets

Having problem opening files with gradients in CS2

When I try to open an illustrator 9 file from CS2, I get "An unknown error has occurred." message. I believe this may be a CS2 problem because when I checked further, I discovered that only AI 9 files where the gradient feature was used were affected. Any suggestions would be appreciated.

Hi Sjmitc, I followed Barbara's instructions about only about 24 hours ago and since then my files have been opening perfectly. I tried it again before replying to you and they are still opening fine.
I did have to go through my files a couple of times to find all the Elements preferences, but the solution is working fine so far. I will let you know if I have any further problems. It is maddening when it happens, so I hope you can fix yours.
Best of Luck
Date: Wed, 6 Nov 2013 18:23:28 -0800
From: [email protected]
To: [email protected]
Subject: Problem opening files with Mac OS Mavericks and Elements
    Re: Problem opening files with Mac OS Mavericks and Elements
    created by sjmitc in Photoshop Elements - View the full discussion
Henwen, Is this solution still working for you? I tried this same solution on mine a few days ago and had no luck. However, it actually let me open files this afternoon then when I went back in later today, it was doing the disappearing act again.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5821793#5821793
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5821793#5821793
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5821793#5821793. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Having problems extending wireless network

I'm trying to extend a wireless network using a number of bits of hardware and would like to know what is the best way of doing it. I've had a good play around with things already, and have read a few tutorials/forum posts but I don’t think I've quite got it right.
The problem:
The current position of the wireless modem/router is in an upstairs room at the front of the house. While this works well with internet connectivity generally (Apple TVs are connected wirelessly in two upstairs front rooms and the living room downstairs, also at front), there is poor signal at the back of the house downstairs where we have another Apple TV that keeps dropping out.
This Apple TV is on the other side of what was the house's external brick wall (the house was extended, so this is now a kitchen/diner that is in a conservatory extension). So a floor, some distance and a brick wall separate this Apple TV.
What I have tried:
Initially I tried using an Airport Extreme Base Station (AEBS) to extend the BT Home Hub (BTHH) signal but had problems with this. According to BT, it should not be possible to extend the network in this way. So instead I tried this:
In upstairs front room:
* BTHH - transmitting 1 wireless signal (which I *could* use but …)
* Connection from BTHH ethernet into AEBS which is then transmitted wirelessly (And *this* is the wireless network I will use for Home Sharing/Apple TVs)
Downstairs, near back of house:
* An old Airport Express (first gen A1088 device), which I configured to extend the existing wireless network (the one transmitted by AEBS, not BTHH). No physical connections here - it's just done wirelessly
This *appears* to be OK, at least from from Airport Utility tells me (I used an older version - 5.6 - to configure the Airport Express, V6 to configure the AEBS). However, the proof is in the pudding, as they say - the Apple TV with the weak signal remains weak (3/5 bars according to Apple TV signal strength indicator), despite the Express being just a couple of feet away inside the house.
So, what can/should I do?
I think I have some more options. I have Powerline sockets that I can use, so I could connect ethernet in the upstairs room and then have the socket downstairs plug straight into the Airport Express.
What is the best way to set it up?
BTHH ---- ethernet ----> [Powerline] ---- ethernet ----> Airport Express
BTHH ---- ethernet ----> AEBS ---- ethernet ----> [Powerline] ---- ethernet ----> Airport Express
Or is there a simpler way I could do it?
I know that I *could* do this:
BTHH ---- ethernet ----> AEBS ---- ethernet ----> [Powerline] ---- ethernet ----> Apple TV
And have that TV use a wired connection instead of wireless, but I'd prefer not to do that for a couple of reasons:
1) The TV is against a wall, with limited space behind for cabling/sockets and there is no immediate power supply (so I'd have to run it all through trunking)
2) It's better if I can extend the wireless signal generally, not just for that Apple TV, but for all devices that might need to connect at the back of the house.
Appreciate any suggestions of what I can do here. I know this is a long note, but I wanted to be clear about what I have tried, what I've got at my disposal, etc.

Thanks for the welcome.
I have checked the settings and have set both up from scratch a number of times. The TC is set to allow the network to be extended and the Express is set to extend the network and to allow wireless clients.
I have also tried a number of different positions for the Express including in the same room without improvement. The network extension does work but with a significant deterioration in network performance when connecting via the Express. I would expect some deterioration in performance for the signal to pass from Express to TC but this seems extreme. The effect is even more pronounced with iPhones (3GS, 3G and 2G). the connection is actually quicker over the mobile network even for the 2G phone.
Cheers

Problems extending network with Airport Express

After messing with the settings on my new Airport Express((802.11n), I finally managed to set up a WDS network that sort of works. I've been struggling for a day and a half trying to use it to extend my regular network set up on my Airport Extreme(802.11g). I used multiple configurations, different securities, channels, etc, and got nothing but flashing amber. Somehow I've got it working with AirTunes, but no internet. Here is the current WDS setup:
*AEBS(g)-WDS MAIN*
Connected to Comcast broadband
v 5.7
WPA/WPA2 security
Channel 6
Set as WDS-Main
Internet: Configure IPv4: Using DHCP
Remote is set to the ID for the AX
Sharing: Share a public IP address
*AX(n)-WDS REMOTE*
v 7.3.2
WPA/WPA2 security
Channel 6
Set as WDS Remote
Internet: Configure IPv4: Using DHCP
Sharing off (Bridge mode)
The AX works as a music streamer only. In order to access the internet I have to switch to the main network (AEBSg). For some reason the AE is not sharing internet connection with the AX. Could it be my internet settings on the AE? Or maybe it's not possible to extend a "g" network with an "n" AX? Any suggestions would be great...

Price difference between an express vs an extreme makes moving to an extreme very attractive. using extremes and the extend a network feature automates a lot of settings. I tried the express route and was never happy with the results.

How do I Get Extended display with another monitor?

I connected my iMac to another LCD Display, and i'd like to get both monitors to be extended displays instead of mirror displays. Basically Both monitors are showing the same image, but i would like to have both monitors be extended and not share the same screen, for the main reason of working with Logic Music, and i need more visual space to work with.
My question... How can i do that?
I went to the help, and the help menu said..
1.)Open System Preferences and click Displays.
2.)Click Arrangement and follow the onscreen instructions.
But i don't see Arrangement on my displays window.

Hi,
GOT IT !
Hope this helps someone in future....
The Popup Key LOV (Displays description, returns key value), and probably other Popups, automatically create a hidden field for the return value.
My field was P7_CONTACT so htmldb creates a hidden item P7_CONTACT_HIDDENVALUE
P7_CONTACT.value equals the display text.
P7_CONTACT_HIDDENVALUE.value equals the ID value.
So, I can access the returned Display name by:
html_GetElement('P7_CONTACT').value
Done deal...
Thanks, Bill :>)

Having problems compiling *.java with import javax.servlet.jsp......

I've been trying to do the tutorials in a book titled Apache Jakarta-Tomcat as part of my introduction to JSP. I'm new to Java but do know the basics. I have on my machine Java 1.3, Java 1.4, Java FrameWorks 2.1 and Jython 2.1 on Win2000 Pro. So enough about my configuration. I have never worked with packages also.
I downloaded the files from the books site due to the fact I make a lot of typos when hand coding Java (I've become a pretty good debugger of my own code). But everytime I go to compile the *.java I get error messages. So below you will find HelloTag.java and beneath that the error messages that are thrown when I try and compile it. I tested other bits of *.java and have had no problem compiling them. Is there a JSP module I'm missing?
Am I doing something wrong or am I missing something from my configuration.
Marijan Madunic
package chapter2;
import javax.servlet.jsp.JspException;
import javax.servlet.jsp.JspTagException;
import javax.servlet.jsp.tagext.TagSupport;
public class HelloTag extends TagSupport
public void HelloTag() {
// Method called when the closing hello tag is encountered
public int doEndTag() throws JspException {
try {
// We use the pageContext to get a Writer
// We then print the text string Hello
pageContext.getOut().print("Hello");
catch (Exception e) {
throw new JspTagException(e.getMessage());
// We want to return SKIP_BODY because this Tag does not support
// a Tag Body
return SKIP_BODY;
public void release() {
// Call the parent's release to release any resources
// used by the parent tag.
// This is just good practice for when you start creating
// hierarchies of tags.
super.release();
D:\Java\JDK 1.3\bin>javac HelloTag.java
HelloTag.java:3: cannot resolve symbol
symbol : class JspException
location: package jsp
import javax.servlet.jsp.JspException;
^
HelloTag.java:4: cannot resolve symbol
symbol : class JspTagException
location: package jsp
import javax.servlet.jsp.JspTagException;
^
HelloTag.java:5: cannot resolve symbol
symbol : class TagSupport
location: package tagext
import javax.servlet.jsp.tagext.TagSupport;
^
HelloTag.java:7: cannot resolve symbol
symbol : class TagSupport
location: class chapter2.HelloTag
public class HelloTag extends TagSupport
^
HelloTag.java:14: cannot resolve symbol
symbol : class JspException
location: class chapter2.HelloTag
public int doEndTag() throws JspException {
^
HelloTag.java:20: cannot resolve symbol
symbol : variable pageContext
location: class chapter2.HelloTag
pageContext.getOut().print("Hello");
^
HelloTag.java:24: cannot resolve symbol
symbol : class JspTagException
location: class chapter2.HelloTag
throw new JspTagException(e.getMessage());
^
HelloTag.java:28: cannot resolve symbol
symbol : variable SKIP_BODY
location: class chapter2.HelloTag
return SKIP_BODY;
^
HelloTag.java:37: cannot resolve symbol
symbol : variable super
location: class chapter2.HelloTag
super.release();
^
9 errors

Well, it looks like you've not got the servlet development kit JAR on your classpath. I think it'll probably be called servlet.jar on your system. Add that to the classpath if it's not already there.
Incidentally, you've bumped into one of the areas Java's slightly lenient - declaring a method that looks like a constructor:
public HelloTag() { }
public void HelloTag() { }The first is a constructor, the second is a normal method. I'm assuming you intended to have the former instead of the latter.
Anyway, hope this helps.

Having problem syncing iPod with iTune

I have never come across this problem before but I have the 80GB iPod and I tried to update and sync it and iTunes does not have the sync option available. It is grayed out and it asks me to "Transfer purchases from iPod". I don't have any purchases to transfer or anything and even when I do click on it nothing happens. At this point, I can't sync my iPod or add any new songs. What should I do? Any suggestions?

Hi i am having the same problem have you sorted it yet ive go inand reset the deve manager reinstalled at my wits end and i am going away tommorow with no internet for 3-6 weeks so it will probably have to wait until im home again cheers sb2432

Having problems wirelessly printer with Airport and my Epson CX400

I recently bought an Airport Express and an Epson CX400. The printer works fine plugged in via USB to my computer but it doesn't work when plugged into my Airport Express. The odd thing is that my computer recognizes the printer in Print & Fax, however in the Epson Print Utility it doesn't and when I go to print a page I get the error, "printer is offline." I've tried re-installing the drivers and just about everything Apple suggested. I Googled the issue and I didn't find anything helpful or up-to-date. Has anyone had this problem and found a solution? A response would be greatly appreciated.
Message was edited by: David

I have the same problem with an Epson CX9400Fax. My printer setting says Location: Base Station eb8bbb. I've done all the updates I can find, talked to the friendly people at my local computer store. No help there. I just upgraded this computer from OS X 10.3 to 10.5.6. The printer worked wirelessly then. I have another iBookG4 that prints wirelessly just fine. So, what's up? Turtle

Is anyone having problems synching itunes with iphone 5 ?

I have a Pc with windows XP. I can't download my itunes library to my iphone 5s. I could with iPhone 4.
I have the latest version of itunes on my computer.
I've been told by Apple and Verizon that my computer is too old and doesn't have the necessary drivers to run iphone 5.
Is anyone else having this same problem? Any advice would be appreciated.
Thanks.

I don't wnat you to have any issues with your device, tracybayne! Let's get to work to make sure we get you up and running. Have you been able to try to reset the network settings in your phone? The best way to do that is to go into Settings, General, Reset, Reset Network Settings. The phone will power cycle and then you will need to re-type in all the wi-fi passwords again. Once that is done, please re-test it out. Keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

Having Problems Extending Extreme with another Extreme as well as Express???

Similar Messages

Maybe you are looking for