Having problems importing artwork

So here's my dilemna. I am able to drag and drop about 70% of the artwork to my library, but the other 30% just won't work and for some reason iTunes won't accept them. The ID3 tags are fine and they are all pretty consistent; Album titles, songs and artists are all filled.
I've been dragging and dropping the artwork mostly from Amazon. For some reason though my rare CDs it would accept, like most of my Radiohead singles and etc., but some of my more popular albums it won't save the artwork (Depeche Mode - Violator for example). I do notice though when it's 'paused' I drag the artwork and it stays in the box, but when i click 'play' it disappears on me.
Any ideas?
Thanks!

I notice you have a VAIO. I wonder if the Sony media drivers could be an issue. Apparently new versions have been released here:
http://www.sony-asia.com/support/faq/300917/productcategory/itpersonalcomputer
tt2

Similar Messages

I am having problems importing from a DVD or a CD to my Ipod nano via windows 8. I initially set everything up on a computer with windows 7, and authorized the windows 8 computer as well. Howevre, the oly thing that comes up on windows 8 is my purchases

I am having problems importing to my Ipod nano via windows 8. I usually do this from a windows 7 computer and have had no problems; hoever in windows 8 I can only see items purchased in the Itunes store. I do not have access to my entire library, which includes song uploaded from CDs and some videos. As a result, I'm having problems uploading any new items from CDs or DVDs. The computer with windows 8 is an authorized computer, so I don't understand why I'm having the problem.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

I am having problems importing my Iphoto pics into new Photo programme. I am inporting approx 11,000 pics that all seem fine in Iphoto but the iport rejects around 7,000 of them with incorrect mete data. What can I do to import these?

I am having problems importing my I photo pics into new Photo programme. I am importing approx 11,000 pics that all seem fine in I photo but the import rejects around 7,000 of them with incorrect mete data. What can I do to import these?

I have the same problem.
Thread here: Import fails - "Unable to get metadata"

Having problems importing my .mov file.

I am having problems importing several .mov files into iMovie. I also can't import .wmv files and I have been utterly confused. I know I have to convert the files but I don't want to pay for a program because I will only be converting 4 files. Please help!

What is Mpeg Streamclip
It is a free conversion application that accesses the QT structure and all installed QT components without having to pay the $30 for QT Pro or purchasing GarageBand. It's "engine" is MPEG-based, so it can do some things that QT Pro cannot do ( e.g., retaining audio content when converting multiplexed compression formats). On the other hand, it cannot perform layer operations like QT Pro can so these applications are somewhat complementary.
and is there anyway you can send me a link to download this program please?
MPEG Streamclip

Im having problems importing prores files at correct frame rate

im having problems importing prores files at correct frame rate. they have been converted to prores at 25fps but on importing they appear in fcp as 30fps. any help would be appreciated.

I don't know anything about Wondershare. But it seems something may have got messed up in the conversion. Or maybe there is an identifier on the converted clip that has FCP confused and it really is 25 fps.
To begin, your sequence settings don't match your clips. You want a Pro Res sequence. Let FCP set this automatically by dragging a Pro Res to an empty sequence and when gives you a message asking whether you want the sequence to match the clips, click yes. Then hit command 0 again and see whether the frame rate is set at 30 or 25.
If it really is 30, then it will need to be converted and re-imported. It can be done in Compressor or in Cinema Tools. If you have used Cinema Tools before, great. Of not, I'll defer to others because it's been a while and I don't want to mess you up.
Good luck.
Russ

I am having problems importing some CDs into iTunes on a laptop with Windows 8. Most CDs import without problem. The ones I can't import can be imported into iTunes with Windows 7. Does anybody know why this problem is occurring?

I am having problems importing some CDs into iTunes on a laptop with Windows 8. Most CDs import without problem. The ones I can't import can be imported into iTunes with Windows 7. Does anybody know why this problem is occurring?

First-off, this seems to be a general problem with 10.4 (across all the operating systems of which I am aware). Unfortunately, I cannot provide a permanent solution but, if you need a quick fix, this will (hopefully) work for you.
For some inexplicable reason, iTunes no longer recognises standard Windows paths. For example:
Y:\Music\Buddy Holly\Buddy Holly - Rave On.mp3
The end result is that it will import a playlist with no content.
It will, however, recognise the equivalent Apple paths which look like this:
file://localhost/Y:/Buddy Holly/Buddy Holly - Rave On.mp3
It is possible to convert your existing playlists using a few basic replace commands in something like Notepad. In my case, I made some code changes in my music manager and now generate two sets of playslists (one standard and one to accommodate iTunes).
Forgive me foir stating the obvious but please remember to make sure that the disk / path containing your music is accessible when doing the import otherwise you will probably get a blank result. Note that you can do a bulk import by selecting all the (revised) playlists and dragging them onto the iTunes sidebar.
I am sorry that this is not a "clean" solution but it will work if you are in a bind. The only alternative of which I am aware is to wait for Apple to fix the problem.

Having problem importing midi files.

Hello everyone,
I am having trouble importing midi files in GB. Every time I do all I get is a single insrument, and not the whole midi file as it was when I downloaded it. I tried Dent du midi and cant even get that to work. It looks like it is working, but never seperates the tracks. I would really like to be able to pick apart midi files. Anyone have any ideas. This is my first Apple, but I have been a PC Tech for 8 years now. (I Hate PCs, I love the Mac)

Welcome to the forum. Yes, sometimes these issues occur. Since I am the biggest importer of MIDI files to GB3, I will see what I can do for you.
First, when you wish to import a MIDI, drag the file onto an empty area (ie no tracks) of the GarageBand window. Hold until you see a + sign. Drop, and you should see the tracks appear.
How did you obtain the MIDI file? From the Net? How did you save it? What were the steps?
Do you have Quicktime Pro? Sometimes the way you save a MIDI file will make a difference. You have a choice between "save as movie" or "save as source", and I believe the latter works best.
Has it worked for other MIDI files? Or is one or two giving you issues? Perhaps if you can post a link to the MIDI file, I can have a look at it.

Having Problems importing

I have a samsung model sc-hmx 10c ntsc. My problem is when I am trying to import I get a message that tells me there was a problem importing and to review the clips. I have been racking my brain to figure this out and need help.

Hello,
did you solve your problem?
Actually I have currently the same issue with the same cam recorder (sc-hmx 10c ntsc.) you discribed.
pls tell me how to proceed if you or someone else know it..
Thanks in advance
parkoeur

Just started having problems importing photos to LR?!

For no apparent reason, I developed problems importing images onto LR - everything was working just fine then..
Get a message:
"Some operations were not performed.
Could not copy a file to requested location"
It itemised every image I am trying to import
I thought I would upgrade to LR 4 and the problem would go away - it didn't!!
Ive seen posts about permissions...???
Can you help?
Thanks
Baz

Hi Keith - good question - might explain why it has suddenly happened..
Will get back to you - Thanks Keith.
Baz

Having problem with "artwork size & resolution exceeds the max that can be rasterized"

Hi all,
Ok, I created a 162.7" x 90.6" document (artboard) for an exhibition display I'm designing. The document was created using all the defaults - i think this is where i went wrong. Illustrator is now telling me that "the combination of artwork size and resolution exceeds the maximum that can be rasterized" after i open the document and when i try to add a drop shadow to anything.
Other than some vector graphics i created in illustrator, I only have 3 180ppi and 4 300ppi photos tranfered right off the photograpers camera.
I selected :
1. "Print Document" from the initial splash window.
2. I entered the artboard size, bleed and left the "Raster Effects" setting to "High (300ppi)"
I think leaving the Raster Effects setting at 300ppi is where the problem is.
Do i have to create a new document or can i fix the existing one?

nados you are a little confused that's all I think things are ll right and you are probably set to go with out going to Photoshop.
1. Your file is probably fine as is
2. Make certain you images are linked and not embedded
3. Your Images are probably ok as far as they are for the the specs required do not lower the resolution just make certain they are linked.
You may have to reimport them and in the place dialog make certain link is checked.
4. The Raster Image Effects setting is fine leave it as is.
5. The jpegs are fine lee your images as is if that was what was supplied to you and they look clean.
6. When saving the file save as .AI format and in the AI save as option dialog uncheck include linked files
(you will send them the jpegs as well as the AI file.)
7. Send the images in what ever format they are now since that is jpeg leave it be just make certain the dimensions are the same as is being used in the document at 100%.
8 Make Certain you select the text and got Type> Create Outlines before saving the file.
9 Do not export the file to any other format.
10 Send the printer production house the AI file and the Jpegs you will be fine.
You should not have a problem with this file.

Having problems importing AVI files

I am getting an error message when trying to import an AVI file. I converted a whole batch of MOV files to AVI files because when I imported the MOV files into Premier Elements 9 it would only play back the first five seconds of audio on each clip. Now, only about 4 out of the 20 AVI files will import. With the other files I get this message "This type of file is not supported or the required codec is not installed." WHAT THE HECK!!!!!! They are all the same type of file converted from the same type of file at the same time! WHY THE HECK will adobe import a few (and play them back fine) and not the rest! I am seriously in tears. I HATE Premier at this point. All I want is to put our family videos on DVD. I have spent HOURS just trying to get Premier to recognize the clips. Seriously?!?

The main conversion program, that I use, is shareware, DigitalMedia Converter (Deskshare), and I have an older version, 2.7, that has been replaced. My older version cost US$ 49, IIRC.
For MOV files, I often use Apple's QuickTime Pro, with is an upgrade/unlock, that costs ~US $29.
With those MOV files, what CODEC is used in them?
There are certain CODEC's, often seen in the MOV wrapper, that are Mac-specific, and there is no PC version available. The FCP AIC (Apple Intermediate CODEC) is one of those.
If one has SD (Standard Definition) material, on a PC, the ideal format is AVI, but specifically with the MS DV/DVC CODEC. Those files will Import perfectly, and edit smoothly.
Now, when it comes to CODEC's, I always recommend finding out the exact CODEC needed, and then downloading and installing only that/those. I always try to go "to the source" for my CODEC's, and will pay for a commercial CODEC from the originator, rather than install some free version of it. I also shun any CODEC "packs," as many can cause all sorts of problems.
Please let us know what the CODEC/CODEC's is/are, and then perhaps we can offer a bit more direction.
Good luck,
Hunt

Having problem importing scanned jpgs from ScanCafe

I had some old pictures scanned by company called ScanCafe. When loading to LR 5.4 it will load but when you click the thumbnail to develop. It has an exclamation point and give message, Lightroom has encountered problem reading this photo. This same picture will not upload to Flickr getting the message This file failed to upload. But jpg will load in Facebook, SmugMug or Google Photos. I believe that it is the jpgs the problem, but company is saying its not their jpgs.
I've attached a link to the jpg picture maybe you can shed light why this jpg cannot be imported to LR 5
https://drive.google.com/file/d/0B6LiH8v7ilrGM1NMcTZUanRUdFU/edit?usp=sharing

I am not a real computer tech, so this probably isn't going to be a lot of help to you. I encountered the same problem you did. So I next opened the file in Photoshop, made a slight adjustment in brightness. Then I saved and closed the image. Next, I imported it into Lightroom again and was able to work with it in Lightroom without any of the error messages. It looked the way it did when I finished using Photoshop. I don't know how to tell you to fix it any other way. If you have Irfanview you might try that. Or, if you have Photoshop/Bridge and know how to use the image processor you might batch process images and resave them. Then try working with them in Lightroom. Incidentally, when I first opened it in Photoshop I received a message that the file may be damaged or truncated. But I clicked on the button to continue, and got the results I described.

I'm having problems importing a movie from my Panasonic Lumix DCM-ZS1 to iMovie

Hi, I'm new to mac and I have a Panasonic Lumix DCM-ZS1.
When I import my movies to iPhoto, the clips play perfectly, but when I try to open them with iMovie, they look very dark. The only solution I've found so far is to open them with Quicktime and export the video as m4v it can be opened in iMovie without a problem. I think it might have to do with a codec or something like that.
Here's a video of the problem.
http://www.youtube.com/watch?v=juYmsH7nXAw
Thanks in advance for your answers.

You don't need the Clip Browser...just get the Log and Transfer plugin and use FCP to import. I have a workflow here, with links to the software you need:
Tapeless Workflow for FCP 7 Tutorial
If you use the CLip Browser, you need to use IT to convert the footage to Quicktime, then bring the QT files into FCP.
Shane

Having Problems importing XML file from FCP 6 onto a FCP 5 application

I have a project file that i worked on FCP 6 and wanted to move to FCP 5 app. on a different Pro Mac but when i try to import the xml, it prompts me to "Please choose a Translation Document File". I choose the FCP 6 project file because i wasn't sure what to choose and i get the ERROR: No translation templates matching the selected XML file were found. Unable to import this file.
any ideas?

make sure you exported your XML from FCP6 using a compatible XML version (1, 2 or 3) ... version 3 would make the most sense as its the most recent FCP5 compatible version .... don't export using version 4 (the default for FCP6), that one is for transfering projects between different installations of FCP6 only

Having problem importing a class

When I compile my program called Dic2.java, I get the following error:
C:\Program Files\Java\jdk1.6.0_01\bin>javac Dic2.java
Dic2.java:1: '.' expected
import Entry;
^
1 error
I compiled my Entry class and it did just fine. Here is my code for Dic2.java:
import Entry;
public class Dic2
protected Entry entries[];
public Dic2(String puzzle) // constructor
    if (puzzle == "unscramble")
      entries[0] = new Entry("stupid", "Insult");
      entries[1] = new Entry("monkey", "Zoo animal");
      entries[2] = new Entry("meerkat", "Animal Planet had a series set in the Kalahari Desert featuring this small furry animal");
      entries[3] = new Entry("burrow", "Where meerkats sleep and raise their pups");
      entries[4] = new Entry("boogers", "Gross things");
}I don't know why my compiler wants a period. I hope you can help me. Your help will be greatly appreciated.

I know you're gonna think I'm crazy, but I I've just started using jdk1.6.0_01 after years of using my more familiar jdk1.2.1. I'm used to compiling packages to jdk1.2.1/jre/classes/com/whatever. I have done similar programs using my own classes in my old version and didn't have to compile them to a package. Is this a newer requirement?
Also, which path should I take to compile a class in the newer jdk1.6.0_01? It's all different from my old jdk1.2.1.

Having problems importing artwork

Similar Messages

Maybe you are looking for