Having problems using search function on FM forum; no results ever found

I've done searches on topics that I know exist, but I never get any results. I never used to have this problem. Did something change?

fwiw, the forum search functionality (within forums as well as over all the forums) seems to be having issues over the last several weeks. I haven't had any search results for several weeks, tried 3x different browsers.
There's a discussion about it in the Forum Comments section:
"Is the forum search broken"
http://forums.adobe.com/thread/823088?tstart=0

Similar Messages

Bug on search function in this forum

When i try to use the search function on this forum, i get the blank page with this message : The page caused an ESI processing exception
Regards
Pascal

I have always the error too, but this error is now since more than one month.
Is there nobody at oracle.com to correct this problem??
Or does nobody knows of the error?
Thats a really damn error.
You cannot search for something and so you need
to make for everything a new question!
Hoping that somebody correct this problem!!!
Schoeib

Why I cannot use search function in my apple store? I use Ipad 3 and it is the latest software

Why I cannot use search function in the apple store on my ipad?

Nobody here could possibly answer your question as presented. Have you tried any troubleshooting steps at all?
Quit the app store completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work ... A few more details from you might help you get your problem resolved.

Problem using two function based indexes at once!

Hello Oracle!
I've got problems using two function based indexes on geometries at once.
The problem occures, when I use a spatial join between two geometries both using function based indexes.
The test case:
CREATE TABLE quad (centroid NUMBER);
CREATE TABLE points (no NUMBER, point MDSYS.SDO_GEOMETRY);
CREATE OR REPLACE FUNCTION getQuad (centroid NUMBER) RETURN MDSYS.SDO_GEOMETRY DETERMINISTIC IS
BEGIN
RETURN MDSYS.SDO_GEOMETRY(2003, NULL, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,1),MDSYS.SDO_ORDINATE_ARRAY(centroid-5,centroid-5,centroid+5,centroid-5,centroid+5,centroid+5,centroid-5,centroid+5,centroid-5,centroid-5));
END;
INSERT INTO USER_SDO_GEOM_METADATA VALUES('quad','tiedge.getQuad(centroid)',MDSYS.SDO_DIM_ARRAY(MDSYS.SDO_DIM_ELEMENT('X', -100, 100, .0000001), MDSYS.SDO_DIM_ELEMENT('Y', -100, 100, .0000001)),NULL);
CREATE INDEX quad_idx on quad(getQuad(centroid)) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
INSERT INTO quad VALUES (0);
INSERT INTO quad VALUES (5);
INSERT INTO quad VALUES (10);
INSERT INTO points VALUES (1, MDSYS.SDO_GEOMETRY(1001,NULL,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,1,1),MDSYS.SDO_ORDINATE_ARRAY(4,4)));
ALTER SESSION SET QUERY_REWRITE_INTEGRITY=TRUSTED;
ALTER SESSION SET QUERY_REWRITE_ENA[i]Long postings are being truncated to ~1 kB at this time.

hi there,
For a better audience for this question, I'd look at the database forum.
guys on that will be a lot more familiar with FBIs
thanks
Barry

Problem using LIKE function

Hi Guyz,
I am having small problem using LIKE function . The problem is I am using LIKE function in the WHERE clause
to compare a column to a particular value, which gets this value from the front end. If the user has a single quote in the string he entered then the LIKE function is not working because of the single quote. Is there any way I can escape the single quote like we escape '%' and '_'.
Thankyou.

Mod_plsql supports bind variables, as do almost all front-end tools that deal with Oracle (and most other databases). I do not code mod pl/sql myself, but others here do, and I see bind variables in their code all the time (if I don't, they hear from me :-)).
If you pass a bind variable, the quote problem goes away. As far as I know (which is not very far), you should be able to take the string with the quote directly from your input field, bind it to the variable in your query and have no problems.
I suspect that the reson you are having issues is that you are just gluing strings together to create a sql statement. this is the wrong approach.
The java term for what you are looking for is prepared statement, I'm not sure what the equivalent is i mod plsql, but that should give you a start.
John

For users having problems with Mail functionality...

Hello! I have been having problems with Mail functionality as well, so, I took a few steps to see if I could solve the problem on my own.
My problems were:
Mail would freeze when sending mail, or, when I pressed quit, it would freeze.
If I toggled between inboxes too much it would freeze up.
Even after trying the many techniques others offered on this board, Mail still froze up. So.. here's what I did:
1.) Turn off the auto-retrieve mail function in the preferences/general menu. Set it to a manual check. Just check it yourself every once in awhile. It may not be as convenient, but it works, trust me.
2.) Under the fonts and colors menu, set all three fonts to the SAME font (mines Century Schoolbook, but anything works) and turn off fixed-width font. Sometimes mail has a tough time decoding and working with texts, and causes it to freeze.
3.) Clean our your main inbox! Place the emails that you want to keep, but don't need to be in your inbox in a new folder on your inbox bar (mines aptly named 'Saved Messages.' That way, when you open up Mail to your default account, it doesn't have 1,000+ messages to index. Also, try to keep the inboxes from having more than 100-200 messages per. It seems to frown on any more than that.
After trying these three easy, steps, restart mail and see if things run smoother. I have had no problems since these changes, and mail runs a ton better. Plus you don't have to worry about deleting your library/mail folder anymore. Let me know if things work out so I can see if my theory is a universally proven thing. Thanks and good luck!
iMac G5 20" Mac OS X (10.4.5)

Good question. I have worked very little with IMAP other than as a testing device, so, on a daily routine I cannot say how it would function. However, I can only expect that by having the option to download all emails for offline viewing selected, you are right in it being a lag creator. Another suggestion would be, if you are running a single-computer setup, to have the account delete emails from the server after recieving them on your computer. Thus, you reduce the risk of repeat downloads or unnecessary build-up on the server end. DO NOT select this option if you run multiple computer set ups on one AppleMail account system or you will cause some discrepancies and/or data loss from system to system. Or, if you have emails redirected from a seperate server to Mail (i.e. I redirect mail from my university email account into Mail so that I don't have to go to the web-mail site to check it--> just like Gmail or Yahoo etc etc) you won't be able to check them from the web-based email system if you have the system delete them. Ok that sounded confusing. Solution: have the system remove emails from the server after a week (or any period of time, just not immediately) so that, in the off-chance you need to use the online system, you will have access, and will give you a chance to check the emails on other systems without a threat of data corruption (by corruption i mean that frustrating feeling you get when you can't find that super important email that was in your inbox just 10 seconds ago on your desktop etc.)
I will see if I can learn anything more about IMAP Ernie. Its definitley the biggest problem source for Mail, POP and .Mac being simple and functional as long as you don't play with the settings too much. As far as the issue of Offline viewing goes, try turning it off and seeing how Mail functions.
BEFORE you turn it off, however, I recommend saving all of your emails in your inbox as a text file or something so, in case the server burps and has a brain flatuence, you don't lose anything. Been there, done that, thrown the books against the wall in a frustrated rage.
My only reserve about the Offline Viewing is whether or not Mail will, when you click "recieve mail," have to re-download the emails from the server each time. If so, then it may end up taking longer and lagging more. The issue here is obviously minimizing the amount of activity between Mail and the email server without jeapordizing information on the server or multiple Mail programs on the same account. When we can find that balance, I think Mail's potential will be realized. Keep the questions coming.

How to use search function in ipod nano 7th generation

how to use search function in ipod nano 7th generation?
Cheers thanks.

There is no search function. If there was, it would be mentioned in the iPod's User Guide.
7G Nano User Guide
B-rock

Having problems using ion tape express with itunes cannot find the song on hard drive

Having problems using ION tape express with itunes. The song is on hard drive as temp1 not the name of the song. And I have problems playing it in itunes
because it says it cannot locate the song'

Then correct the name of the song or point iTunes to the new file.
Issues with restoring should be directed to the manufacturer of the backup software/device... this is not an Apple or iTunes issue.

TS3297 Error when I use search function in itunes store and select an artist

When I use search function in itunes store and select an artist I get this message. Microsoft visual C++ run time library. Prog C:\progfiles\itunes\itunes.exe R6025 - Pure virtual function call . It then shuts down itunes and cannot provide a solution.
Have tried reinstalling itunes but it did not help. Any other ideas?

I have yet to find a solution, but as a work around, do not click or select any of the suggested results while you are typing in your search. Type in your search, and press enter.

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds. Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
-DH

I am having problems using my Apple TV. I get a message saying incorrect user id or password, but I am able to sign in everywhere else. Any suggestions? Thanks.

I am having problems using my Apple tv with home sharing. I continuously get a message that my user name or password is incorrect, but it works on other devices. Any help would be greatly appreciated.

Unpower it. If it still happens on a restart give it time - Apple's servers sometimes have glitches.

I have recently been having problems using Firefox: it continually gives a "Not Responding" message.

I have been having problems using Firefox for the past few months:
Whenever I log on, I get a "Not Responding" message, and Firefox "freezes." I then have to "click" my mouse several times to again be able to use Firefox - but only for a few minutes. Firefox then freezes again and shows another "Not Responding" message.
Because of this repeated "crashing," I have been using I.E. as my browser, because it does NOT have any such problems.
How can I FIX this problem with Firefox?

Many site issues can be caused by corrupt cookies or cache.<BR><BR>
Clear the Cache<BR>
'''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
<BR><BR>and<BR><BR>
Remove Cookies<BR>'''''Firefox/Tools > Options > Privacy.'''''<BR>
Under '''History''', select Firefox will '''Use Custom Settings'''.<BR>
There is a button on the right side called '''Show Cookies'''.<BR><BR>
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
<BR>While you are in safe mode; '''''Firefox Options > Advanced > General'''''.<BR>
Look for and turn off '''Use Hardware Acceleration'''.<BR>
Poke around safe web sites and see if there is still a problem. Then restart.

I am having problems using my iphone4 during calls. When any part of my facial skin touches the screen, it would either go mute, hold, speaker or whatever part my skin accidentally touches the screen.The other caller then cant hear me

I am having problems using my iphone4 during calls. The screen does not automatically lock to prevent any part of my skin or face from touching it. When my skin touches the screen it would either go mute, hold, divert to speaker phone or calls another in my contact list. The person i'm talking to then cannot hear me suddenly when in mute or hold. Is there any application for my iphone4 like a "screen lock" when it is being used on calls?

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

I am having problems using Firefox with Ebay in the last 10 days. The advanced search link is dropping off the page and there is no way to access it now.

I have been using Firefox and Ebay for at least 12 years with no problems whatsoever. But in the last 10 days I have been having trouble with the Advanced Search link disappearing from the page on Ebay. If I do a search from the Ebay home page it will show the results, but the Advanced Search link (in blue letters) which always used to appear to the right of the Search button is gone. If I click Search again at this point I can see the Advanced Search link appear for a millisecond, but then disappear just as quickly. Also, if I refresh the page the same thing happens. I tried to duplicate this problem with Internment Explorer and it didn't occur, so it appears to be Firefox that is causing this issue. Of course when I contacted Ebay they told me my problem was that I wasn't using Internment Explorer! I love Firefox and do not want to switch!

You can try to clear the cache and cookies to see if that makes a difference:
<h3>Clearing Cache</h3>
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and uncheck everything else.
#Now click the ''Clear now'' button.
<h3>Clearing Cookies</h3>
#Go to Firefox > Tools > Privacy > Remove Individual Cookies
#Find the site (ebay.com) that's having problems and clear all cookies.
#Restart Firefox
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.

Cannot use Search Function in Forum

Every time I try to use the search feature in the forums I
get an error.
Here is the text copied from the error...
The web site you are accessing has experienced an unexpected
error.
Please contact the website administrator.
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
Variable FTVAR_RESULTTYPE is undefined.
Resources:
* Enable Robust Exception Information to provide greater
detail about the source of errors. In the Administrator, click
Debugging & Logging > Debug Output Settings, and select the
Robust Exception Information option.
* Check the ColdFusion documentation to verify that you are
using the correct syntax.
* Search the Knowledge Base to find a solution to your
problem.
Browser Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
rv:1.9.0.5) Gecko/2008120122 Firefox/3.0.5
Remote Address 10.172.32.23
Referrer
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=15&catid=194&CFID=1541 3013&CFTOKEN=8b0c8ce20af4f68e-FA72514B-A425-665B-D9A1D0BCD285B82F&jsessionid=4830953c596ca 4972cec39653114e2a21605
Date/Time 21-Jan-09 10:44 AM

me too and I could really use it because I'm running into
weirdness with CS4.

Having problems using search function on FM forum; no results ever found

Similar Messages

Maybe you are looking for