Having problems with 4 track preamp

I have just gotten a Yamaha MW10c usb mixing studio hoping that I would be able to record at least 4 channels live into garage band. However I have followed the instructions and garage band with only recognize the first to channels. Is this a problem with garage band or my mixer. The manual says that I do not have to install any software. That it should just be plug and play. Are there multi channel preamps that work for garage band and can record up to 4 channels at the same time?
Thanks
Dunbar

Most usb audio interfaces are only 2 channel out. The only usb mixer that I heard does multichannel out is the newest Alesis multimix usb 2.0.

Similar Messages

  • Is anyone else having problems with the Canon Online Store?

    In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
    I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store.  They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
    Is anyone else having problems with the Canon Online Store?
    Why does Canon not care to track reported problems with the storefront part of their web-site? 
    I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far.  Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not.  In trying to register that lens, I looked up on the Canon web site where to find the serial number.  Since my new lens did not have any numbers there, I was concerned I had been sold a fake.  But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was. 
    Is Canon like that with other problems, as well?  Or is their "batting" average better than my very limited experience? 
    I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral":  EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)! 
    Regards and Thanks,
    Calen
    As an old friend used to always say,
    "Keep Looking Up!"
    Calen

    Hi Danny.  Thanks for replying.
    I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years.  And, yes, it is the latest version.  Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT?  WHEN did Canon STOP SUPPORTING Firefox?
    I've been told that there are 2 pending orders in my account.  Yet, I NEVER placed those orders!  WHY CAN'T CANON SEE THAT THIS IS A PROBLEM??? 
    Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place!  But, maybe that's a bit too grown up of an answer for you! 
    "Award-winning" support???   And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS???  The OSTRICH?
    Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
    Thank you for your "prompt" attention to this matter!
    Calen
    As an old friend used to always say,
    "Keep Looking Up!"
    Calen

  • Having problem with midi?

    I am having problem with midi keyboard (korg pa80) I having hard time to midi to logic every time I have to either restart the logic or restart the keyboard or plug out the USB cable and put back in order to work. Plus when I created a new track doen't work with it. I have to do same as above to make it work? help please how can i refresh the midi connection with going throw steps above?

    Is it the computer dropping the MIDI interface, or the computer connectin is fine adn Logic is not seeing it?
    Run the Audio/MIDI Setup utility and make sure your MIDI device is present. If not, try another USB port, or don't use a hub.
    Assuming the connection is solid, in Logic, option-click on File -> New and try it - if it works in that song, but not your own songs, it's a song specific issue, so check your MIDI input handling in the environment.

  • I amm having problems with My Leaderboard in Pga tour website

    The PGATOUR golf site is one of my favorite sites . I always track my golfers by using the 'My Leader board' but lately I am having problems with this. Every time I visit this site I can't seem to add or delete any golfer. I have one golfer permanently there, I can remove him but when I want to add a different golfer this same golfer appears (Zack Johnson).
    Even when I go to the drop down list and choose a golfer, Zack Johnson appears again.
    Regards, John Halloran.

    Is there any chance of a reply to this problem from firefox.It can't be that big a deal. I use to use internet explorer and never had this problem.

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    This is a major problem with Lollipop, but yo said it started 2 months ago.   Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again.   You might want to clear your cache before reloading.  Not sure this is your problem, but worth a try.  Good Luck

  • I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

    I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

    Apple ID FAQ   http://support.apple.com/kb/HE37

  • HT1657 I am having problems with sound in my rental movies

    We rent movies all the time but lately we are having problems with sound for our movie rentals.  We watch the first half hour without a problem than the voice is choppy all the time.  Sometimes it is good for five minutes than noting for a while.  We  have tried everything we could think of with no avail.  I could see one movie but the last 5 or so have been the same.  Done trying we need to fix this!  Help!  Any ideas?

    First try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
    If you still have the same issue, it's possible that something is lodged in the earphone jack. This can cause the iPad to think earphones are plugged in when they are not. Use a vacuum to try to suck any dust, lint or other foreign matter from the jack. If that still doesn't work, try CAREULLY using a toothpick.

  • Hi Can anyone help. I'm having problem with FaceTime on my IPAD .It connects but cuts out Simolarly when someone calls me it connects , then cuts out ThanksBrian

    Hi Having problem with FACETIME on my IPAD Connects to call but then cuts out , similarly calls in connect & cut out Can someone help. Brian

    My ipad is doing the same thing to it won't let me except a incoming call on Facebook and I don't know what to do

  • I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or atleast maintain the charg over longer periods of time? I have a dc adapter. thanks

    I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks

    You should be able to use the battery if you get a car type charger which recharges mobile devices.
    The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
     Cheers, Tom

  • I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

    I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

    WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
    Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

  • I am having problem with MDV Studio.

    Hello happy guys, whatzup? Guess all ya 'r doing fine? Right!
    I am using Dreamweaver from Macromedia Studio 2004. I am having problem with Inserting Record into Access database using the forms I create on my .asp document. I am using IIS and Javascript as my Document Technology. The error I usually have is:
    "Technical Information (for support personnel)
    Error Type:
    Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
    [Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
    /site_files/user_regform.asp, line 78
    Browser Type:
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/530.5 (KHTML, like Gecko) Chrome/2.0.172.28 Safari/530.5
    Page:
    POST 41 bytes to /site_files/user_regform.asp
    POST Data:
    uname=Honesty&pword=admin&MM_insert=form1
    Time:
    Tuesday, June 02, 2009, 1:49:39 PM"
    Please I need assistance on how to solve this problem. Thank you.
    Similarly, I don't really know how to write sql strings - I just give commands and Dreamweaver will generate the sql strings. Yet, I still observe errors. But I think, for the sql aspect, I'm undergoing a tutorial note that I downloaded on the internet.
    Please help me to solve this error problem at the moment. The sql knowledge is not the problem. I can get that at my leisure.
    Thank you.
    Eyo Eyo (Nigeria).

    It sounds like you do not have an internet connection (wifi arcs in the upper left does not mean you have a connection) since Safari does not work also.. Try the following:
    - Reset the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • I am having problems with my itunes, when plugging my iphone or ipod to the laptop - i can see iphone/ipod in the top right corner of itunes but when i click this to the see what is on theis iphone/ipod the option is no longer there, this was working

    I am having problems with the new itunes set up ........
    when i plug in my iphone or ipod touch it shows in the top right hand corner of itunes
    BUT when i click on the shown iphone/ipod the icon its no longer there, i was useing this fine yesterday and it was showing yesterday what is on this ipod and would allow me to add/remove music, but now this option is no longer availlable - i have added a couple of albums to my itunes i can listen to the music from the laptop but cannot sync the ipods to trancefer these albums to the handheld devices -
    i have been trying to sort this all day with no luck not sure if there is a problems with itunes or is it something i am doing ????
    HELP !!!!!!!!!!!!

    BOB we need you urgently
    Perhaps Bob will see this thread, he is the professor in these cases.
    You do not use a WEP password but wpa/wpa2 on router and equipment.
    All equipment connects to WiFi, but for your iPad.
    Even with all other equipment WiFi off, you cannot connect your iPad.
    Your iPad connects to other WiFi nets correctly.
    All resets etc done on iPad and Router.
    Still I am not sure it is your router for sure, frustrating...
    I want to test 2 other things:
    1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
    2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

  • I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them

    Can any one please help me I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them. I have tried all restoring options but no use. please help me

    The mic on my iPhone4 has just quit also. Similar symptoms to yours in that people I'm talking to hear only static or my voice very faintly. The voice/memo recorder also only really records static.
    It happened suddenly and seemed to get better after a day or two but then went completely after another day.
    I'm returning it to Vodafone New Zealand shortly but will have to wait 5-10 days for a replacement. There are NO Apple accredited means to speed this procedure up in NZ.
    We don't even have a single physical Apple Store where you could walk in and talk to a Genius.

  • I am having problems with the Preview application.  When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it.   Any ideas on how to resolve this problem?  Thanks for any help

    I am having problems with the Preview application.  When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it.   Any ideas on how to resolve this problem?  Thanks for any help

    Can you open the Preview program without loading a file, like by itself?
    If it doesn't load then I suspect a corrupt Preview preference file.
    Deleting the System Preference or other .plist file
    Can you open other files with Preview, like jpg's and images?
    How about other PDFs? or is it just that one you have downloaded?
    Run through this list of fixes
    Step by Step to fix your Mac

Maybe you are looking for

  • ITunes 10.5.3.3 installation - disable auto sync

    I have tried everything to disable the AutomaticDeviceSync.  I have created the HKEY_LOCAL_MACHINE\Software\Apple Computer, Inc.\iTunes\Parental Controls\Default\AdminFlags HKEY_CURRENT_USER\Software\Apple Computer, Inc.\iTunes\Parental Controls\User

  • Cant burn getting Error 4280 (Yes I have latest version)

    I was having this issue before I upgraded to the newest version and still seem to not be able to burn. I am getting Error 4280? There isnt much info on this to fix it it seems... I'm running Win7 64 Never had a problem before. Ideas to fix this?

  • Design menu option missing

    i have two issues : 1) i installed the 4.0.3.853 oracle sql developer data modeller but I dont see the "DESIGN" menu option ? i am trying to convert a logical model to physical model . 2) for identifying or non-identifying relationship its showing th

  • Material Created by user

    Hi, Please help me out in development of below report eith coding. <b>A report for displaying purchase documents for a material created by user.</b> You can send your views to '[email protected] Thanks in advance. -muraly.

  • Why, when I bounce to iTunes, do my wave files show up with no sound?

    When I bounce wave files to iTunes the file has a time and the title shows up, but no sound when you double click on it. The time bar moves like its playing but no sound!!