Having problems with a recently updated email/apple ID. New email not being recognized.

I recently changed my email address for my apple ID. I went on  my phone and changed/updated the ITunes and App Store section with my new email. Everytime I try to use an App, a pop up appears with my old email/apple ID and its asking me for a password. How do I get this pop up to stop or better yet how do I get it to display my new email/apple ID? 

Settings > Store > Sign out.
Then Sign in with the correct credentials.

Similar Messages

  • Been having a lot of problems with blackberry, fixed them but now SD card is not being recognized.

    Lately, I've been having a lot of problems. My phone is only a year old. My phone would be fully charged, then 10 minutes later die for no reason & would not turn back on. I decided to buy a new battery & try it out. Gladly, it worked.
    I also decided to wipe everything on my phone then restore the phone to my previous back up. This worked. This morning,as I was playing music, the pause button did not want to work. I didn't think much of it. Later today, when I restarted my phone because it was lagging, when it restarted, my blackberry was not recognizing my SD media card.
    I find this very strange. It is 4 GB &is a lexar. I have already tried formatting the card, this has not worked.
    I have tried almost everything.
    Please help!
    I use my SD card daily due to work related things.
    Please please please help!

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • After performing a routine software update this week, I am having problems with both of my email accounts.  I am unable to "Reply" to any emails. Does anyone have a solution to this problem?

    After performing a routine software update this week, I am having problems with both of my email accounts.  I am unable to "Reply" to any emails. Does anyone have a solution to this problem?

    I am having the same problem also  Thought it was my network and reset everything including Apple TV but still the problem is there . I assume now it is down to iOS 8 prior to that was perfect

  • I am having problem with iMessage after updating my 5s to iOS 8.0.2

    I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through

    Hello Huyen,
    Thank you for using Apple Support Communities.
    You can use the following article to troubleshoot Messages:
    iOS: Troubleshooting Messages
    Regards,
    Jeff D. 

  • I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

    I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

    Doh! Rectified flash!
    But when face timing 2 seconds after it connects wifi disconnects? Any thoughts

  • Hi im having problems with my internet and email ive reset the network even with my wifi on ive also turned off and on airplane mode help please thank you

    hi im having problems with my internet and email Ive reset the network even with my WiFi on Ive also turned off and on airplane mode help please thank you

    hi Ive reset my network toggled the airplane on and off and turned off my carrier off then turned my phone off and turned my carrier back on but still problem persists

  • Im having problem with my itunes, i tried to put new gift card abunch of time but its always tells me that in put invalid security code.. what should i do now?

    Im having problem with my itunes, i tried to put  new gift card abunch of times but it keep telling me Invalid security code. What should i do now pls. help me, can't update all my apps anymore they dont let me!!

    you have to log in to your account on the computer iTunes and edit your payment information there.
    iTunes Store: Changing Account Information
    http://support.apple.com/kb/HT1918

  • I am having problems with the charging port of my iPhone, it is not bring recognised on my laptop and directly to an electrical socket. Please what should I do?

    I am having problems with the charging port of my iPhone, it is not bring recognised on my laptop and directly to an electrical socket. Please what should I do?

    Check that the LCI in the dock connector of the iPhone hasn't been set off as shown in the article below:
    http://support.apple.com/kb/ht3302
    Try a reset aswel:
    - hold the home button and sleep/wake button down for atleast 12 seconds
    - release both buttons as soon as you see the apple logo appear

  • I've been having problems with the battery draining within half an hour of it being fully chargers. I have an iPhone 5c and haven't had it for long. How do I get the troubleshoot email to check it out? iPhone 5c

    I have been having issues with my battery capacity. The battery will drain within half an hour with it being fully charged when the battery normally lasts me all day. I haven't had the phone that long so it most definitely shouldn't be happening. I went to my service provider about the problem and he said to go into the apple website, click "support" and then "battery capacity issues" to which you then type in your email to troubleshoot the problem on your phones however, I cannot find this. Someone help me out!

    He may have been referring to: https://www.apple.com/support/contact/
    On the linked page, click "Get Started" then on the next page click "iPhone" then on the next page "Battery, Power & Charging" then "Battery questions or troubleshooting"

  • Having problem with Auto Software Updates

    Hi there,
    I having trouble with updating all software updates on my iMac. Some of updates being downloaded but they are not installing.
    after downloading it, something stopping installation... and this is happing with each and every update.
    please Help.
    -Sonu

    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Is anyone else having problems with the latest updates?

    I Am having a lot of problem with my iPad 2 since updating it to 8.0.2.  Face book app doesn't work nor does Bejeweled Blitz.  Deleted both apps and reinstalled again without success.
    my husbands iPad 2 is updated as well and when he plays his favorite game (spades) a advertisement appears right in the middle of it and he can't get rid of it.
    Any help will be appreciated
    Thank you.

    Hi ..
    Try a reset on both devices.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.

  • Is anyone having problems with the newest update of ITunes and then trying to update the Iphone 4?

    I updated the ITunes on the computer and that went ok, but when i went to go and update the IPhone 4 it went to restore it to the factory settings and then something happened where it wouldn't let it update and now the phone is stuck in Limbo world with the apple symbol showing and a status bar, but nothing else. also the phone is not showing up as being plugged in while in this limbo faze.

    Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

  • SQL Developer 1.5 having problems with JDK 6 Update 7

    I tried to open a table using SQL Developer 1.5 but connection timed out. when using SQL developer 1.2 i don't get any problems opening it.
    i have JDK 6 update 7 installed.
    the only problem with SQL Developer 1.2 is that i get a jdbc in the error log
    how do i get to fix the SQL Developer 1.5?

    --The sql developer is connected using tnsnames.ora, with read only access
    --i'm using windows XP SP3
    --I have jdk 6 update 7 installed
    --The tables that I can't View is listed under Other Users.
    --I thought it was just because i have no permission to view it, but when i used the old sql developer 1.2, it displayed it properly.
    --The reason i want to use SQL developer 1.5 is because i don't want to see any JDBC error on log messages, which happens on the sql developer 1.2
    --i dont get to see any errors, sql developer suddenly can't view and lost the connection. it says connection is currently busy. and suddenly stops responding, the only way i can get it working again is by using the taskbar, when it close the program it gets java is not responding..
    --also when i try running sqlcli.bat i get error with it.. is it because of my java?
    --What more details do you need?
    Edited by: user10285639 on Oct 15, 2008 4:47 PM
    Edited by: user10285639 on Oct 15, 2008 4:53 PM

  • HT5654 I had to remove my old version of itunes because I was having problems with the latest update. Now I am tryin to download the lates version and it keeps telling me I am not the administrator.How can I downdoad itunes?

    How can I reinstall itunes without it telling me that I am not the administrator?

    The iTunes app on your device is bundled with iOS.
    The latest version of iTunes for your PC is 10.7:http://www.apple.com/itunes/
    If you have the latest version of iTunes installed on your PC, and are still having trouble with the device, try this:
    1.  Connect your device to your computer.
    2.  Listen for the "new hardware found" beeps.
    3.  If you do not hear the beeps and if iTunes does not automatically start, try a different USB port. 
    4.  If you still do not hear the beeps and iTunes does not run, try a different charging/docking cable.
    5.  If that fails, then try connecting your device to a different computer.
    6.  If this fails, the device is defective.

  • Having problems with apps downloading on ipad 3, since new iOS update.

    iPad 3 having problems downloading apps with new iOS 7? Where can I get answers.

    Can you describe these "problems"?  Are these new apps just purchased or upgrading existing apps?

Maybe you are looking for

  • How to use 1 time capsule between two macs

    We have a mac and a mac book pro. How do we separate them on my time capsule so they dont share caledars, address books, etc?

  • No two way sync. Only iCal to BB?

    Hello again, Any simple answer for why suddenly my appointments on my Blackberry Curve  are now not syncing over to my iCal? I can get appointments from iCal to the BB, but NOT the other way around.  BB appointments will not show up in iCal. In Janua

  • Reg Table edit by default

    Hi Everyone,                           i have one view with table which has three fields, when i click create button i want table fields to be in editable mode. Regards, vino.

  • HT1766 If i manually back up my phone in i-tunes, how do i keep prior backups

    i back up my phone manually to i-tunes every few months b/c i like to extract and print my sms for work I noticed today that with ios 7 update, some of my prior backups had been deleted.   I would like to keep prior backup files How can i do that. Th

  • Changing PO through IDOC PORDCH02  gives an error

    Hi ,   When I try changing /modifiying an existing PO through Idoc PORDCH02 , I get an error  with status 51 & message   "BUFFER TABLE NOT UP TO DATE"  , Also the POItem segment is displayed in red with no messages . kindly help me in resolving this