Having problems with brand new battery installed...Help please!

Here's my problem. I just recently replaced the battery on my 13" Macbook. The brand new battery ordered from Apple arrived on Saturday and up until last night everything was great. Now all of a sudden the computer is doing the same things it did with the old battery. I am getting the green light on the MagSafe Adapter even though the battery is not fully charged. I am also alternating between "Not Charging" on the battery icon and a "X" on the icon.
I did some reading and tried resetting the PRAM and SMC. I even uninstalled Leopard and reinstalled Tiger (updating everything afterwards), thinking maybe it was a software issue. (I just recently installed Leopard and hoped it was just a bad install.) None of that really seems to work.
There is one slight exception- the SMC reset. After I do the SMC reset I get the amber light from the adapter, the icon shows charging and all is well for about 15 to 30 minutes. Then I am back at square one.
I was wondering if anyone had any suggestions or ideas on what could be going on. Any help would be greatly appreciated! Thanks!
Message was edited by: luckylindyhopper

It seems like you have eliminated all the easy fixes for your problem - what is left is the computer itself. Call Apple (800-275-2273) and explain the troubleshooting you have already done. They should set up a repair for your computer. If it is out of warranty you may have to pay for the repair.
Best of luck.

Similar Messages

Hello, I'm having problems with my new GX60. Help please...

Hi first I want to congrats MSI for the good quality of their products. That's why I decided to buy a laptop, but here is my experience and my problems also. First I bought my laptop regarding the language problems, because it came with Windows 7 in Chinese, and thankfully to a chinese friend I could buy it.
First, I couldn't find a MSI laptop in my country, and now that I won a scholarship in China i Decided to buy one here...in China!!
And then I decided to go for MSI, and it's quite brand-new GX60-1AC...that is my first problem, I couldn't find the laptop model in the list and I registered my serial with another model that it's not mine....my model is a gaming series, the GX60-1AC, and mistakenly I've chose the GX600 which is an old model...
--So, would you can change it for me please? because I want all the benefits of the warranty and want to extend it, please. Thanks for this priority problem.
And the second problem is that I guess there is a promotion of Windows 8 about this laptops, the Gaming Series laptops. And I want to upgrade my laptop to Windows 8, but I don't know how to do it. Please help me out to do this. I can give you all the information you need. The receipt, original serial and other stuff.
Thanks in advance and keep the good support.
David Romero

Thanks....I've downloaded that program, and it says that the CPU #0 is at 45 degrees....seems to be normal
The Min is at 42 degrees and the Max is at 46 degrees.....
And about the auto fan control, is there a way to modify it? I mean I want that the fan starts to spin at 5 minutes, or when the temperature rises to 60 degrees, as a example....is there a way to do that? because the fan starts to spin every 30 seconds, and the sound is somewhat annoying...is not too loud but you can hear it very clearly.......... so I don't know when and how it has to sound...is there any guide to know when a fan is defective?
I mean probably MSI has some standard about the loudness of the fan...
Also, thanks for the support, if this can help anyone else about something it could be great.
PD. By the way I was reading about the EC resetting, is there any benefit to do that? and how about the battery calibration? I've spent my whole night without sleeping to make it work but in the end Windows 7 decided to sleep because the battery was at a critical level and when I restarted the Battery Calibration program was no responding and it was closed by Windows. >(
Is there a guide of how to do that?
PDD. Also I recently found about fan buzzing? fan whining? it could be possible for a new laptop...I can't distinguish both terms. And I can hear it just right after turning on the laptop and while I use it without playing nor doing anything else more than surfing in the web, like now.
PDDD. Damn! I found that the Techpowerup GPU-Z shows me that the integrated GPU, the 7660G, is at 88 degrees!!! Here is a pic:
Then HWmonitor tells me that it's at 43 degrees!?!!? is there any good and real program to get the real temperatures? Here is the pic from HWmonitor:

Having problems with brand new ASA5505 and ASDM

I have a brand new out of the box ASA5505. I can connect with https://192.168.1.1 and login with blank username/password
From there I get a screen that tells me I can either
- Install ASDM Launcher and run ASDM or
- Install Java Web Start
If I choose the first option, ASDM runs, I put in 192.168.1.1 (and leave the UNAP blank) and it just sits there trying to connect
If I choose option 2, it just loads java.com
I have gone to java.com and installed the Java SE package (32bit and 64bit just in case - I'm on a 64bit Windows OS) which the docs say include Java Web Start, but the router still tells me "Java Web Start is required to run ASDM, but it is not installed on this computer"
I'm stuck, I've been googling for 2 hours. Found people say if ASDM doesn't run it could be a java mismatch and just to use the java web start client. Any help is greatly appreciated. Thanks.

Hi
Yes normally you need a smartnetcontract, but atleast in sweden you can talk to your ciscorep to get the newest software during the first 90 days.
And yes updating the Java have in several occations in the past made the ASDM stop working.
Thats the problem with java, it is incompatible with itself so the question must then be why use it to something as important as ASDM and log handeling ?
I am sorry but I have no answer to that.
Good luck
HTH

Having problems with brand new muvo n20

got the 52 version yesterday.i wanted to try out the voice recorder and mp3 encoding today and when i select either i get a "urecoverable error" message and shuts down. is it broken already? any reset procedures i can do?

I bought a 52 N200 a week ago, everythin except song browsing and playlists work great. I'm very impressed with the recorders sound quality.
Still waiting for some instructions or updates on this site though.

Is everybody having problems with Canoscan drivers-can anyone help, please?

After starting with Leopard, my LIDE25 refuses to work, and the window from the toolbox tells me a driver cannot be found, even after redownloading the driver, which, according to the Canon website, is perfectly compatible with the LIDE25 driver. Someone is not being honest, or Apple has made a huge mistake in the bug department. My smart mailboxes don't work either.Can anyone help? I see there are others with Canon scanner driver problems on this forum - what can we do? I'm so tired of fragile scanners breaking down and needing replacement - they are like VCRs in this respect, somehow a crap technology - but this time it's surely not the scanner to blame.

I have a Conoscan 8400F scanner, and after downloading the latest driver it actually works BETTER than it ever has... used to take almost 3 minutes to scan a 8.5 X 11 page, now less than a minute.
Jeff

I am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?

i am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?

Further info - I changed my security settings to allow apps from anywhere, and again tried to install. I again got an error message
that the update failed to install, and to contact Customer Support.

Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update problem with thyis new phone, someone HELP!!

Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update problem with thyis new phone, someone HELP!!

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob

In my Iphone 5, Nothing on my App Store is working its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component but still it doen't fix. Not sure if its problem with apple servers. Someone help please!

In my Iphone 5, Nothing on my App Store is working, its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component in my desktop but still it doesn't fix the app store issue. Not sure if its problem with apple servers. Someone help please!

settigns>itunes and app store to make sure you are signed in.. If you are, you will see your account name..... anyhow, click your account name, sign out and sign back in
also go to to settings>general>reset and reset network settings... if that doesnt work settings>general>reset and reset all settings!
one of those shall work. The last step would be to restore your device (apple.com/support) HT1414

HT4623 Is anyone else having problems with the new up date? it's messed up all my passcode and everything

Is anyone having problems with the new update?? it has messed up my mail I can't send and all my passwords are messed up

Is anyone having problems with the new update?? it has messed up my mail I can't send and all my passwords are messed up

Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Is anyone having problems with the new Xerox printer driver update from Apple? My 8700S is no longer working with QuarkXPress.

I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S. EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer. I went to the Xerox website and downloaded their Printer Driver and tried again. Now I could print from Quark but I can NOT get to the printer window to change the type of paper, etc. So, the problem still persists.
Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
Should I upgrade the whole system software? (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
Should I upgrade to Quark 9?
Any help here would be apprciated.
Thanks - Rob

As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software. I hide the updates until I need them. Usually this happens when I update or upgrade my os. I don't fix what ain't broken is my golden rule.
It is possible that you need to update or upgrade Quark in order for your newer printer driver to work. First I would try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
If your printer does not work afterwards, update or upgrade Quark. If that does not work, contact the printer manufacturer.

Is Anyone Having Problems with the newer version of Firefox?

I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.

Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

Having Problem with JSP In Netscape!HELP!!!

HI to all! I�m having problem with the jsp that i have :( If i use the Internet explorer it works but at Netscape... it doesn�t work :( The value of "PTE" is null... I need help !!!Please! I think the HTML IS NOT HELPING ...
the code is :
<html>
<head>

<title>BBVA - Transferências - Transferências OIC</title>
<LINK rel=STYLESHEET type='text/css' href="estilos/tablas.css">

<script language="Javascript" src="js/banner.js"></script>
<script language="Javascript" src="js/tp_oic.js"></script>
<script language="Javascript" src="js/utilidades.js"></script>
<script language="javascript" src="js/limpar.js"></script>
<script language="javascript" src="js/tiempo.js"></script>
</HEAD>
<body marginheight="0" marginwidth="0" leftmargin="0" topmargin="0" class="pag-contenido" onLoad="controlSesion();">
<%@ include file ="includecbtf.jsp" %>
<% String s = (String)datos.get("dt");
java.util.StringTokenizer str = new java.util.StringTokenizer(s, "-");
String anoServer = str.nextToken() ;
String mesServer = str.nextToken() ;
String diaServer = str.nextToken() ;
%>

<form method="post" name="captura" action="<%=urls.get("action")%>">
<center> 
<br>

<table border="0" cellpadding="0" cellspacing="0" width="500"> 
<tr>
<td colspan="3"><img src="images/linea.gif" border="0"></td>
</tr>
<tr>
<td width="250"><img src="images/traspasos.gif" border="0"></td>
<td width="82"><img src="images/titular.gif" border="0"></td>
<td width="169" class="fondotitular"><font class="texttitular"><%=datos.get("usuario")%></font></td>
</tr>
<tr>
<td colspan="3"><img src="images/linea.gif" border="0"></td>
</tr>
</table> 
<br><br>
</center> 
<center> 

<table cellpadding="3" cellspacing="1" border="0" align="center" width="500"> 
<tr>
<td class="cabeceratitulo" colspan="2"><p class="titulotabla">Nota : As Transferências para outras Instituições de Crédito decorrem de acordo com os horários da Compensação Interbancária, não se responsabilizando o BBVA pela sua realização fora das regras em uso.</p></td>
</tr>
<tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr>
</table> 
</center> 
<center> 


<table cellpadding="3" cellspacing="1" border="0" align="center" width="500">
<tr>
<td class="cabeceratitulo" colspan="2"><p class="titulotabla">Transferência Conta a Conta para outras Instituiçôes de Crédito</p></td>
</tr>
<tr>
<td class="formgrisosc" width="100">
<p class="dato">Conta Ordenante:  </p></td>
<td class="formgrisosc" width="300">
     <%
java.util.Vector v = (java.util.Vector)(datos.get("ListaCuentas"));
java.util.Hashtable elem;
java.util.Enumeration e = v.elements();
%>

<select name="conta" size="1" class="formgrisosc">
<%
while (e.hasMoreElements()){
elem = (com.ibm.dse.base.Hashtable)(e.nextElement());
String cuenta = ((String)elem.get("s_banco")).trim() + "-"+((String)elem.get("s_oficina")).trim()+((String)elem.get("s_dcontrol")).trim()+((String)elem.get("s_num_cuenta")).trim();
out.println("<option value=\"" + ((String)elem.get("s_tipo")) + "$" + ((String)elem.get("s_clave_asunto")) + "\">" + cuenta + "</option>");
%>
</select> 
</td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">Data de Processamento:</p></td>
<td class="formgriscla">
<input type="text" name="dia" size="2"class="formgriscla" value="<%=diaServer %>" maxlength="2" class="formgriscla"> /
<input type="text" name="mes" size="2"class="formgriscla" value="<%=mesServer %>" maxlength="2" class="formgriscla"> /
<input type="text" name="ano" size="4"class="formgriscla" value="<%=anoServer %>" maxlength="4" class="formgriscla"></td>
<input type="hidden" name="dact" size="2"class="formgriscla" value="<%=diaServer %>" maxlength="2" class="formgriscla">
<input type="hidden" name="mact" size="2"class="formgriscla" value="<%=mesServer %>" maxlength="2" class="formgriscla">
<input type="hidden" name="aact" size="4"class="formgriscla" value="<%=anoServer %>" maxlength="4" class="formgriscla"></td>
</tr>
<tr>
<td class="formgrisosc" width="100"><p class="dato">Moeda: </p></td>
<td class="formgrisosc"><p class="dato">

<select name="Moeda" size="1" class="formgrisosc">
<option value="PTE" selected>Escudos</option>
<option value="EUR">Euros</option>
</select> </p>
</td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">Importância:</p></td>
<td class="formgriscla"><input type="text" name="importancia" size="20" maxlength="15" class="formgriscla"></td>
</tr>
<tr>
<td class="formgrisosc" width="100"><p class="dato">Refêrencia:</p></td>
<td class="formgrisosc"><input type="text" name="ref" size="15" maxlength="10" class="formgrisosc"></td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">NIB Beneficiário:</p></td>
<td class="formgriscla"><input type="text" name="nibBeneficiario" size="30" maxlength="21" class="formgriscla"></td>
</tr>
<tr>
<td class="formgrisosc" width="100"><p class="dato">Descrição p/ Conta Débito:</p></td>
<td class="formgrisosc"><input type="text" name="debito" size="45" maxlength="45" class="formgrisosc"></td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">Descrição p/ Conta Crédito:</p></td>
<td class="formgriscla"><input type="text" name="credito" size="45" maxlength="45" class="formgriscla"></td>
</tr>
<tr>
<td class="cabecera" colspan="2"><img src="images/1x1.gif" width=1 height=3 border="0"></td>
</tr>
</table> 
</center> 
<center> 

<table border="0" cellspacing="2" cellpadding="0">
<tr>
<td valign="top"><img src="images/limpar.gif" border="0" alt="Apagar"></td>
<td valign="top"><img src="images/continuar.gif" border="0" alt="Continuar"></td>
</tr>
</table> 
</form> 
</center> 
</body> 
</html> 
Thanks pepole!

thanks people! when i try to validate the action "PTE" he gaves me (if i put a ALERT...) null.
the js code is : (Moeda is coin )
//testa amount
// var ent = (f.amount.value);
var tamanho = f.amount.value.length;
var valor = f.amount.value;
decimals = 2; // Apenas pode ter duas casas decimais?
if (((tamanho == 0) || (valor == 0)) && ok)
alert ("A import�ncia tem de ser maior que zero.");
f.amount.focus();
f.amount.select();
ok = false;
else
     alert(f.Moeda.value);
if((f.Moeda.value=="PTE") && ok)
for (j = 0; j < tamanho; j++)
xx = valor.charAt(j);
     if ((!(xx.match(numeroER)) && ok))
alert ("O Campo Import�ncia deve ser num�rico inteiro.");
     f.amount.focus();
     f.amount.select();
     ok = false;
          //if para limitar valor dos Escudos
     if (ok)
     if (eval(valor) > 1000000)
     alert ("The field amount must be maxium 1 000 000 Pte.");
     f.amount.focus();
     f.amount.select();
     ok = false;
else
     if (ok)
          //function checkDecimals(f.amount, f.importancia.value) {
          if (isNaN(valor)) {
               alert("O Campo Import�ncia deve ser num�rico e como separador decimal, o ponto.");
               f.amount.select();
               f.amount.focus();
               ok = false;
          else {
               timeshundred = parseFloat(valor * Math.pow(10, decimals));
               integervalue = parseInt(parseFloat(valor) * Math.pow(10, decimals));
               if (timeshundred != integervalue)
               alert ("Apenas pode ter " + decimals + " casas decimais. Por favor tente outra vez.");
               f.amount.select();
               f.amount.focus();
               ok = false;
          if (ok)
          { //if to limit the value of the Euros
     if(eval(valor) > 4988)
alert ("The field amount must be maxium 4988 Eur.");
     f.amount.focus();
     f.amount.select();
     ok = false;
}//end of amount

Anyone having problem with the new ios4.1??

i'm having problem with my iphone 4!!!!!!!!
cant call or text sometimes so i have to rebbot or turn airplane mode on and off!!!!

It's not necessary to post the same thing multiple times.
Have you called your carrier to see if there is a problem in your area? Have you done any of the troubleshooting in the manual? Have you tried a new SIM?

Having problems with brand new battery installed...Help please!

Similar Messages

Maybe you are looking for