Having problems with FI-AA? Want some information and solutions?

Dear Nathan,
Firstly, you should know the assets how it is handled in the corporate level variety of assets. Further, the local regulations for presentation of the same. Accordingly, the depreciation and depreciation areas needs to be configured.
What I strongly recommend keep the combination of Help online from SAP which is ultimate source of information and keep on checking the same in the SAP IDES system. This is a golden key for a success of any person doing SAP for any module from my personal experience.
Try actually going through all the nodes read the documentation in the system which again would be the best source of information.
Hope you got what I am saying.
Have a nice day and do lot of Practice.
Deven.

Dear All,
I have question with regard to the depreciation report & below is the query:
Can we get the deprecation Forecast report based on the posted values for prior months and planned values for future months.
Could you please help me with this.
Thanks & regards,
Pavan

Similar Messages

I am having problem with my push notifications of facebook and other applications on my 3gs ios5.0

Hi,
I am having problem with my push notifications of facebook and other applications on my 3gs ios5.0 device. I have done too many things have updated my facebook application but still it is not showing any push notification. Is there any settings that i need to do for it? Also it is not allowing me to show on mobile in facebook. Any one here can help?

ok for facetime and imessage go into settings turn them off make sure to make an icloud backup and then go to settings general erase all content and settings and then set it up from the backup it should activate your imessage and facetime

Is anybody else having problems with itunes (10.6.3.25) and ipod touch (5.1.1)?

Lately I've been having a ton of problems with iTunes and my iPod Touch (4th generation). Lots of error messages such as can't connect to itunes store, incompatible application, ipod detected but not identifiable, invalid response received from device, unknown errors [mostly (0xE8000001)], problem with audio configuration, etc. I've done everything I could think of. Uninstalling iTunes (with all the components) then reinstalling with the newest version (10.6.3.25), running diagnostics and such. If it does appear (about 2% of the time) then iTunes freezes and/or it won't sync. I also try to change some info (song title, artist, artwork, etc)(when it DOES come up) and it shows up on itunes but not on my ipod. My ipod appears on my computer but not in iTunes under devices like its supposed to. I've been to all the support threads I can possibly find and NOTHING has helped. I also had the latest version for the ipod touch (5.1.1). And I've never had any issues with iTunes or my iPod touch before. I know I should probably try restoring my ipod but I absolutely do not want to do that unless I have to because i have a lot of music, apps, movies, etc I'm not able to back up. Also, I'm using a Windows 7 computer. Please Please help if you can, I am frustrated because I can't do anything.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2

Is anyone having problems with the newest update of ITunes and then trying to update the Iphone 4?

I updated the ITunes on the computer and that went ok, but when i went to go and update the IPhone 4 it went to restore it to the factory settings and then something happened where it wouldn't let it update and now the phone is stuck in Limbo world with the apple symbol showing and a status bar, but nothing else. also the phone is not showing up as being plugged in while in this limbo faze.

Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

I having problems with it switching on my macbook and then it automatically switches off

i have had Yosemite for a while and it was working perfectly, and the suddenly is froze and automatically shut down. I tried rebooting it it would come up with the apple logo and a loading bar e=underneath and when it loads the bar fills in with grew but a quarter from the start it it shut downs again. t is not reopening how do i fix my problem? help!!!!
I want to know how to boot up my macbook without erasing my hardrive.

Try booting into Safe Mode. If that is successful, but then a normal reboot fails, you may have some third-party software installed that is preventing boot up. If you have any ideas what it might be, we can help you uninstall it.
OS X: What is Safe Boot, Safe Mode? - Apple Support
The other thing to try is boot into Recovery and use Disk Utility to repair the drive:
OS X: About OS X Recovery - Apple Support
Finally, you can try just reinstalling the OS using Recovery. It won't erase any of your data, but you should still have a backup.

Is anyone else having problems with Candy Crush Saga blinking out and not allowing you to ask friends for help in moving to another level in the game? If so, how do I fix it"

I have been playing Candy Crush Saga for a long time, all of a sudden it is blanking out when I ask friends for help to the next level. What can I do to remedy this?

Hello Pepper 46,
It sounds like an app you installed is not functioning correctly. I recommend starting with these steps from the article named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
There is additional troubleshooting in the article if this doesn't resolve it.
Thank you for using Apple Support Communities.
Cheers,
Sterling

I'm having problems with my spry menu in firefox and ie

http://www.bayviewdropincenter.org/boardofdirectors.html
The menu in firefox shows the menu for the board of directors correctly on the right side while in IE9 it shows on the left side. Is there a fix for this or do I have to live with it?
Thank you
Allen D. Macfalda

Hello Allen
I suspect that fixing your code errors that I mention in your other post will help with this too.
http://forums.adobe.com/thread/971256?tstart=0
Martin

I am having problems with downloading files, what is wrong and what can I do?

When I try to download a file (ex: file from mediafire) when it gets the windows that lets me choose where to save the file, the window closes and FF automatically downloads the file to a certain place...(last place file was save too)
== This happened ==
Not sure how often
== Not sue...I think it started with the new upgrade...(3.6.6)

No. There is no other location. Be patient. Read the posts in the Bootcamp Forum. There are hundreds of posts about your issue and what to do. https://discussions.apple.com/community/windows_software/boot_camp

I'm having problems with Flash in Firefox, no sound and video very fast, OK in Safari and chrome, latest firefox and flash installed, running xp pro fully patched!

cannot get sound on any flash online media also video playing very fast and not buffering properly. same sites perfectly ok in chrome IE and safari

cannot get sound on any flash online media also video playing very fast and not buffering properly. same sites perfectly ok in chrome IE and safari

Having problems with adobe acrobat prof. 9 and freeflow access software

I am currently using Adobe professional version 9. I have a 6204 wide format xerox machine scanner and printer. I use freeflow access to retrieve my scanned documents, but adobe and freeflow are not talking? Can anyone help?

You are posting in the Distiller Server forum. Not the Acrobat forum. Please repost.

Having problems with audio jacks, connections are shorting. i need an alternative solution for mixing in logic

i am having problems with mac pros audio jacks,any alternative solutions ?

If you're mixing in Logic, buy a FireWire audio interface. So many people make them, that it isn't funny. Personally, I'm a fan of M-Audio interfaces for a cheap, high quality device.
Here's some FireWire interfaces, they also make USB products.
http://m-audio.com/index.php?do=products.family&ID=FWinterfaces

I'm having problems with the hyper-links and footer

I'm having problems with the hyper-links (they flicker and also highlight other text on the page) and also the footer space goes on forever in preview site mode, even though I have made it small in the master and homepage and subsequent pages. This only happened after I loaded a MUSE file into the current version of Muse CC as it runs upgrades on the imported Muse file. Please Help Me Adobe Community.

Hi Brad,
I'll do what you mentioned about republishing all files, what Adobe Muse seems to to is run and upgrade when you open an older version .muse file, optimising it.
Hopefully republishing it rather than syncing with the new version might help. I'll do this Tuesday evening when I am back from my client meeting.
I was thinking, is there a way of me rolling back to a previous version of Adobe MUSE CC ? I'm using build Adobe Muse CC (2014.3) but I wish to roll back to Adobe Muse CC (2014.1), as this was the version the site was working properly with.
Thanks Brad.

I'm having problems with Twitter loading up a completely blank page and no longer displaying content and with Bloomberg not playing videos

I'm having problems with Twitter not loading up content and showing me a blank page. I've tried to empty the browser cache but it doesn't seem to work.
I also have issues with Bloomberg not playing videos

Try clearing cookies and cache:
[[How to clear the cache]]
[[Deleting cookies]]
Otherwise use firefox in [[Safe Mode]];
Also try [[Troubleshooting extensions and themes]]

Problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) .

Hi experts
I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
The rule type is direct assingment and there is no routine .
Any clues.
Thank you.

holy devilz wrote:
Hi experts
> I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
>
> I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
> Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
> In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
> ) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
> The rule type is direct assingment and there is no routine .
> Any clues.
> Thank you.
Hmm, your system should consider the alternative UOM maintain in the material master.
Each material in SAP has its standard, base unit of measure (stored in MARA-MEINS). To allow using alternative units, those can be maintained per material in table MARM. So, assuming the Base UoM is only considered (for LE), it converts material quantity from one unit to another, most likely from alternative units to the base one. So, changing that settings must solve. http://goo.gl/JuZlm
Alternative steps:
1.Goto MM42 (Assuming there's no BAPI req?)
2. change po unit from basic unit to other -> save OK
3. change po unit from other to basic unit -> save OK
Also, MD63 shows all data in the base unit of measure.
If you want to explore basic steps, goto RSD1 > Additional > Alternative UoM.
Best Regards, @{

Problems with "no color" in the "Fill and Stroke"

I am having problems with “no color” in the “Fill and Stroke” function of Flash CS4 Pro.
I had been using CS4 for 10 days and everything worked fine. Then I tried experimenting with various color combinations (along with “no color”) for “Fill and Stroke” for a simple button. Suddenly CS4 locked up on me while I was working with the “color panel”. A second color panel appeared in the upper left corner and the program was not responding. All I could do was to end the CS4 task.
After that, whenever I created even a simple rectangle, at first the colors would appear as indicated for “Fill and Stroke”, but when I selected the object to see its properties, either the stroke or the fill color box would have a red slash line, indicating a “no color”, and I couldn’t select the color box to change it using the ink bottle tool, although the other box worked fine.
Rebooting did not help. So I uninstalled CS4 (and didn’t keep the preferences), rebooted, then reinstalled it. The problem was still there. Logging on as another user didn’t help. I tried restoring the Windows system to before I installed CS4 and resinstalling it and that didn’t work. I have a disfunctional CS4 now and I don’t know what to do to fix it. Please help me. Thank you.

Have you updated flash to 10.0.2? Have you played around with a bunch of different selections, objects, and so forth to see if this box is always incorrect? I think there's some particular selection (order of selecting things, and so on), where the color swatches in one location don't work as expected. However, it should not happen all the time and from what I recall it was fairly easy to work around (I can't even figure out what this was - so probably not it, as it seems hard to run into or perhaps now fixed).
Also make sure you have the stroke selected - if you don't have everything selected, either the fill or stroke will show no color and dim depending on the selection.

Having problems with FI-AA? Want some information and solutions?

Similar Messages

Maybe you are looking for