Having problems with key chain password
I just got my mac book yesterday, and I'm having problems with my keychain password.
My keychain password is not the same as my login password, it won't accept it, so i think i made a typing error.
Each time i go on to safari, it asks for the password, which i don't have. i've tried the key chain first aid, and that still doesn't work. I've also tried keychain access, and that also doesn't work as it asks for the password first!
Is there a way that i can reset it?
There are user passwords and Administrator passwords. The only way to check your keychain password is to be the administrator. In an effort to secure my MacBook, I have an administrator account that I don't use at all and I have a user account that is all I use. It is a great way to protect your MacBook info from others.
As to your question, passwords are case sensitive. You can try to change the password by inserting the CD's that came with your MacBook and reset the password. Seeing that you just got it yesterday, you probably don't have much personal information on it yet, you could use disk utility from the CD and reinstall the Operating System.
Good Luck.
Adam
Similar Messages
-
Is Anyone Else Having Problems With Key Chains After Installation?
My installation went ok but I'm having all kinds of problems with Key Chains now that I didn't before. In addition to them being corrupted, it won't let me save corrected names and passwords even when it asks for them.
Is there a fix if you don't have your Key Chains folder from before the 10.6 installation? I keep having to re-type my MobileMe and student Gmail passwords in Mail, and if I check remember password in Key Chain, I keep having to re-type the password until I uncheck the box, but then that means I have re-type the password every time I send an email or put the computer to sleep.
Also, Keychain Access's First Aid shows that there are no problems whatsoever. When I click on MobileMe in my System Preferences I get 8 or so consecutive errors stating "Keychain Error. There was a problem saving to your keychain. Try again or use Keychain Access to verify your keychain." When I look at my login within Keychain Access, it says my MobileMe keychain is restricted (even after entering my administrator password). -
I'm having problem with my bios password. It tells me to enter current password 100-10250x
Having problem with my bios password.it tells me to enter current password 110-10250x
Place the iPod in recovery mode and restore via iTunes on your computer. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Having Problems with my keychain password!
I had just changed my password because I had forgotten the original one and decided to update and install the new version of Mac OS X. Now it is asking me for a keychain password and it is getting annoying. I know the keychain password should be the same as my login password but when I enter my login password it says invalid password. What should I do and can I get rid of this keychain thing?
The password would be the same as your old login password, which you say you've forgotten. If you don't know the password, the only option is to delete the keychain and start a new one. Use Keychain Access (in the Utilities folder). Follow the instructions for "Delete a Keychain" in Help.
-
Having problem with dead key in Leopard
Hello. I'm having problem with dead key in Leopard.
In Tiger it was working, but in Leopard dead key "'" doesn't work.
In Tiger I could use OPTION key as well to get Latvian special characters (both worked - OPTION Key and dead-key), but in LEOPARD OPTION key is the only possibility to get these characters.
How can I get dead key "'" working?
I'm using Latvian language with Latvian keyboard layout.
Here are images how it looked in Tiger:
1) Before dead key is pressed:
http://amerix.no-ip.org/tmp/1.tiff
2) After dead key is pressed:
http://amerix.no-ip.org/tmp/2.tiffok, i got answer
so - first problem was that ukelele didn't work in leopard (it wasn't possible to start new layout), but it was possible to edit Tom Gewecke posted layout.
There it is possible to change every thing (dead-key as well).
So I edited it and now i have layout where dead-key works -
http://amerix.no-ip.org/tmp/LatvianT.keylayout
Just do what Tom Gewecke said with this layout. It should work! -
I am having problems with the Ipad accepting my password in the secure mode in Wifi. I can get into wifi when the secure mode is off. This only started when I downloaded the lastest update for the Ipad. Anyone else having the same problems? I have rebooted the Rotar and still doesn't work.
I am not.
Which secure mode are you using with your wireless network - WEP or WPA?
Have you tried forgetting this network on your iPad, and/or resetting network settings on your iPad? Both will require rejoining the network and the latter will require rejoining every wi-fi network your iPad has access to when returning within range of the network. -
can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to change the passwords, I haven't used the account since 2010?
Hi eddinchina,
You should have no need to use the Old Sync account.
As long as device or devices are Firefox 29 or later (They should all be Firefox 30 now) you should use the New Sync.
You may use the same email address with both accounts. -
Having problems with iTunes. Every time I enter my password it keeps saying cannot connect to iTunes . Trying to update apps.
Having problems with iTunes. Every time I enter my password it keeps saying cannot connect to iTunes . Trying to update apps.
-
I'M HAVING PROBLEM WITH FUNCTION KEY, I'M HAVING PROBLEM WITH FUNCTION KEY
Hello everybody
Recently i'm having problem with function key of iphone4, now its working assistive touch key board , between these days i had restored and update then it work for next 12 hour after that it again stoped..
pls help me from this isssue,
thanking you.There are no function keys on the iPhone.
Please clearly state the issue that is occurring. -
HT204085 I AM HAVING PROBLEMS WITH MY PASSWORD FOR MY ICLOUD
I am having problems with my password to sign into Itune and ICLOUD account I have a ticket Number is 609987250 do I need two different password for the accounts I mintion
I have done this and keeps saying the same thing. I have even tried setting my account through Microsoft exchange but no luck
-
Still having problems with VPN access
Hello!
I am having problems with my VPN clients getting access to the networks over a MPLS infrastruture. I can reach these resources form my Core network (172.17.1.0/24) and my Wifi (172.17.100.0/24) but not from my VPN network (172.17.200.0/24). From the VPN I can reach the Wifi network (which is behind a router) and the rule that allows that also allows access to the other networks but for some reason it is not working.
When I ping inside the core network from VPN I can connect and get responses. When I ping to the Wifi network, I can get responses and connect to resources there. A tracert to the wifi network shows it hitting the core switch (a 3750 stack) @ 172.17.1.1, then the Wifi router (172.17.1.3) and then the host. A tracert to a resource on the MPLS network from the VPN shows a single entry (the destination host) and then 29 time outs but will not ping that resource nor connect.
I've posted all the info I can think of below. Any help appreciated.
*** Here is a tracert from a core network machine to the resource we need on the MPLS:
C:\Windows\system32>tracert 10.2.0.125
Tracing route to **************** [10.2.0.125]
over a maximum of 30 hops:
1 1 ms <1 ms <1 ms 172.17.1.1
2 1 ms <1 ms <1 ms 172.17.1.10
3 5 ms 5 ms 5 ms 192.168.0.13
4 31 ms 30 ms 31 ms 192.168.0.5
5 29 ms 30 ms 29 ms 192.168.0.6
6 29 ms 29 ms 29 ms 192.168.20.4
7 29 ms 29 ms 29 ms RV-TPA-CRMPROD [10.2.0.125]
Trace complete.
172.17.1.10 is the mpls router.
**** Here is the routing table (sh ip route) from the 3750 @ 172.17.1.1
Gateway of last resort is 172.17.1.2 to network 0.0.0.0
S 192.168.30.0/24 [1/0] via 172.17.1.10
172.17.0.0/24 is subnetted, 3 subnets
S 172.17.200.0 [1/0] via 172.17.1.2
C 172.17.1.0 is directly connected, Vlan20
S 172.17.100.0 [1/0] via 172.17.1.3
172.18.0.0/24 is subnetted, 1 subnets
S 172.18.1.0 [1/0] via 172.17.1.10
S 192.168.11.0/24 [1/0] via 172.17.1.10
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
S 10.2.0.0/24 [1/0] via 172.17.1.10
S 10.10.10.0/24 [1/0] via 172.17.1.10
S 10.20.0.0/24 [1/0] via 172.17.1.10
S 10.3.0.128/25 [1/0] via 172.17.1.10
S 192.168.1.0/24 [1/0] via 172.17.1.10
S* 0.0.0.0/0 [1/0] via 172.17.1.2
*** Here is the firewall config (5510):
ASA Version 8.4(1)
hostname RVGW
domain-name ************
enable password b5aqRk/6.KRmypWW encrypted
passwd 1ems91jznlfZHhfU encrypted
names
interface Ethernet0/0
nameif Outside
security-level 10
ip address 5.29.79.10 255.255.255.248
interface Ethernet0/1
nameif Inside
security-level 100
ip address 172.17.1.2 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 172.19.1.1 255.255.255.0
management-only
banner login RedV GW
ftp mode passive
dns server-group DefaultDNS
domain-name RedVector.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network WiFi
subnet 172.17.100.0 255.255.255.0
description WiFi
object network inside-net
subnet 172.17.1.0 255.255.255.0
object network NOSPAM
host 172.17.1.60
object network BH2
host 172.17.1.60
object network EX2
host 172.17.1.61
description Internal Exchange / Outbound SMTP
object network Mail2
host 5.29.79.11
description Ext EX2
object network NETWORK_OBJ_172.17.1.240_28
subnet 172.17.1.240 255.255.255.240
object network NETWORK_OBJ_172.17.200.0_24
subnet 172.17.200.0 255.255.255.0
object network VPN-CLIENT
subnet 172.17.200.0 255.255.255.0
object-group service DM_INLINE_TCP_1 tcp
port-object eq www
port-object eq https
object-group network DM_INLINE_NETWORK_1
network-object object BH2
network-object object NOSPAM
object-group network VPN-CLIENT-PAT-SOURCE
description VPN-CLIENT-PAT-SOURCE
network-object object VPN-CLIENT
object-group network LAN-NETWORKS
network-object 10.10.10.0 255.255.255.0
network-object 10.2.0.0 255.255.255.0
network-object 10.3.0.0 255.255.255.0
network-object 172.17.100.0 255.255.255.0
network-object 172.18.1.0 255.255.255.0
network-object 192.168.1.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 192.168.30.0 255.255.255.0
object-group network VPN-POOL
network-object 172.17.200.0 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
access-list Outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq smtp
access-list Outside_access_in extended permit tcp any object BH2 object-group DM_INLINE_TCP_1
access-list global_mpc extended permit ip any any
access-list Inside_access_in extended permit object-group DM_INLINE_PROTOCOL_1 any any
pager lines 24
logging enable
logging asdm informational
no logging message 106015
no logging message 313001
no logging message 313008
no logging message 106023
no logging message 710003
no logging message 106100
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302018
no logging message 302017
no logging message 302016
no logging message 302021
no logging message 302020
flow-export destination Inside 172.17.1.52 9996
mtu Outside 1500
mtu Inside 1500
mtu management 1500
ip local pool VPN 172.17.1.240-172.17.1.250 mask 255.255.255.0
ip local pool VPN2 172.17.200.100-172.17.200.200 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (Inside,Outside) source static EX2 Mail2
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.200.0_24 NETWORK_OBJ_172.17.200.0_24
nat (Inside,Outside) source static inside-net inside-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static LAN-NETWORKS LAN-NETWORKS destination static VPN-POOL VPN-POOL
object network inside-net
nat (Inside,Outside) dynamic interface
object network NOSPAM
nat (Inside,Outside) static 5.29.79.12
nat (Outside,Outside) after-auto source dynamic VPN-CLIENT-PAT-SOURCE interface
access-group Outside_access_in in interface Outside
access-group Inside_access_in in interface Inside
route Outside 0.0.0.0 0.0.0.0 5.29.79.9 1
route Inside 10.2.0.0 255.255.255.0 172.17.1.1 1
route Inside 10.3.0.0 255.255.255.128 172.17.1.1 1
route Inside 10.10.10.0 255.255.255.0 172.17.1.1 1
route Inside 172.17.100.0 255.255.255.0 172.17.1.3 1
route Inside 172.18.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.11.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.30.0 255.255.255.0 172.17.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server RedVec protocol ldap
aaa-server RedVec (Inside) host 172.17.1.41
ldap-base-dn DC=adrs1,DC=net
ldap-group-base-dn DC=adrs,DC=net
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=Hanna\, Roger,OU=Humans,OU=WPLAdministrator,DC=adrs1,DC=net
server-type microsoft
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 172.17.1.0 255.255.255.0 Inside
http 24.32.208.223 255.255.255.255 Outside
snmp-server host Inside 172.17.1.52 community *****
snmp-server location Server Room 3010
snmp-server contact Roger Hanna
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
crypto ikev1 enable Outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
telnet 172.17.1.0 255.255.255.0 Inside
telnet timeout 5
ssh 172.17.1.0 255.255.255.0 Inside
ssh timeout 5
console timeout 0
dhcpd address 172.17.1.100-172.17.1.200 Inside
dhcpd dns 172.17.1.41 172.17.1.42 interface Inside
dhcpd lease 100000 interface Inside
dhcpd domain adrs1.net interface Inside
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
group-policy RedV internal
group-policy RedV attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
default-domain value ADRS1.NET
group-policy RedV_1 internal
group-policy RedV_1 attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
default-domain value adrs1.net
username rparker password FnbvAdOZxk4r40E5 encrypted privilege 15
username rparker attributes
vpn-group-policy RedV
username mhale password 2reWKpsLC5em3o1P encrypted privilege 0
username mhale attributes
vpn-group-policy RedV
username dcoletto password g53yRiEqpcYkSyYS encrypted privilege 0
username dcoletto attributes
vpn-group-policy RedV
username rhanna password Pd3E3vqnGmV84Ds2 encrypted privilege 15
username rhanna attributes
vpn-group-policy RedV
tunnel-group RedV type remote-access
tunnel-group RedV general-attributes
address-pool VPN2
authentication-server-group RedVec
default-group-policy RedV
tunnel-group RedV ipsec-attributes
ikev1 pre-shared-key *****
class-map global-class
match access-list global_mpc
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
class global-class
flow-export event-type all destination 172.17.1.52
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:202ad58ba009fb24cbd119ed6d7237a9Hi Roger,
I bet you already checked it, but does the MPLS end router has route to VPN client subnet 172.17.200.x (or default) pointing to core rtr)?
Also, if the MPLS link has any /30 subnet assigned, you may need to include that as well in Object group LAN-NETWORKS.
Thx
MS -
I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
I am having problems with connecting to my router wireles...
I am having problems with connecting to my router wirelessly. How do I determine my access point's network key?
Follow this from a computer already connected: 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier. 2. Go to wireless tab. 3. Go to wireless security sub-tab. 4. If security mode is wpa or wpa2 note down pass phrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key.
-
I just reinstalled a new HD and have forgotten my login and Key chain password. Can you help me to reset them? Thank you
After powering the iPhone off and on, the light goes out but turns back on randomly or immediately after powering the iPhone on?
Since nothing else you have tried has resolved it, try restoring the iPhone with iTunes from the iPhone's backup first.
If no change after that, try restoring as a new iPhone or not from the backup.
If no change after that, the iPhone has a hardware problem.
Call AppleCare or make an appointment at an Apple Store if there is one nearby. -
Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!
OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.
Maybe you are looking for
-
Xcelsius - Crystal Report Data Consumer connection Issues
Sorry for the long post but i hope with the full explaination, i can get a quick answer & solution. Using Crystal Reports 2008 and Xcelsius 2008 Engage, SQL 2008 stored procedure. I have tested the Crystal Reports Data Consumer connection within the
-
How can we verify if bind peekink is activated by Oracle or not
Hi Oracle Version 10.2.0.5 CURSOR_SHARING="SIMILAR" hidden parameter optimpeek_user_binds = "TRUE" stats gathering with "for all columnes size 1 " SQL> SQL> set linesize 300 SQL> set pagesize 1000 SQL> / PLAN_TABLE_OUTPUT SQL_ID bh7hrghvacvqn select
-
MobileMe Gallery not working in iWeb
Trying to create a iWeb page and wanna use mobileme gallery widget but the widget does not work. It tells me to add gallery and movies to the widget and thats already done. What do I do???
-
Hi, All. I have a MacBook Pro with a 15" monitor, 2.8 GHz Intel Core 2 Duo processor. Currently working with OS 10.6.8. I'm not sure since when, but I'm having this issue: Even though I turned the volume off, every time I shut down and boot up, or re
-
Can someone provide notes on TAX configurations for a roll-out in Canada for a joint US/Canadian Operation.