Having Problems with Login Token
I'm constructing a search method.This is my code:
//Get portlet context object IPortletContext portletContext = PortletContextFactory.createPortletContext(request,response); IPortletRequest portletRequest = portletContext.getRequest(); IPortletUser portletUser = portletContext.getUser(); // Use PRC URL urlEndPoint = portletRequest.getRemoteAPIEndpoint(); String strToken = portletRequest.getLoginToken().toString(); IRemoteSession Session = portletContext.getRemotePortalSession(); Session = RemoteSessionFactory.getTokenContext(urlEndPoint, strToken);
I'm getting this exception:
com.plumtree.remote.portlet.NotInRequestException: The Login Token was not configured to be sent to this portlet.
It points to this line of code:
String strToken = portletRequest.getLoginToken().toString();
What am I missing?
In the web service object -> advanced settings page
you have to check mark "send login token"
Similar Messages
-
Having problems with login with bank today. Then...
Well my bank just listed a warning on their site that those customers with FF are having problems logging in. I still tried and yep I can't login either. Also last week when I was on Lee's jean site and looking at pants not all the offerings were show on the page since I was talking with customer service rep. I had no idea it was not pulling up everything. So I have no error message to tell me when FF is not doing it's job. This concerns me since I have no way of knowing if I am getting entire search results using FF. Now my bank is having problems with your browser. So I am resorting to Chrome for now. I like the idea of FF and all but when it impacts so many important abilities online I really can't justify using FF. I know you all are doing your best but I also have to do my best too and using FF is not going to get me the best results right now. Have no idea what is going on. I also just clicked the check our browser on your site to see if I needed updates and what it did instead is it took out all addons and well that was another reason I am not sure what is going on here at FF. I also have been having crash problems with Adobe Flash too with browser off and on for months and I just keep reporting it but it still keeps cropping up. I think maybe it also has something to do with FF. Any addons I have had I installed from your website and I didn't have much at all in addons either. Pinterest is the only one I can think of. I also have problems with my browser locking up like for watching videos online and maybe that has to do with Adobe Flash??? I have no idea and so many things have been glitchy off and on with browser that I am tired of it all and need to find better alternative. Thanks and good luck : (
No I don't feel quiet sure about posting the screen shots of my bank here. But it is Columbia Bank in Washington State that has a warning to their customers who are using FF. "A recent update to Firefox is creating access problems for some customers in Personal Online Banking. We are working on a resolution as quickly as possible. If you are experiencing difficulty accessing Personal Online Banking while using FF we recommend accessing from a different browser until the issue has been resolved. "
When I click and try it anyways I get:
"Secure Connection Failed to web9.secureinternetbank.com It was interrupted while the page was loading. The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the website owners to inform of this problem."
I switched to Chrome this morning and I was able to access bank account no problem. I also went to daily mail and usually my computer gets whiny with all the ads that load up and none of them loaded with Chrome it was way better.
Watched a video and no problems. I appreciate the suggestion to Sea Monkey but I have done that browser before. I forget why I left SM long time ago but had to be a good reason. IF FF is not that well supported then I would seriously doubt that SM would be any better. I have too much to do to play tech detective on this or that. I don't care for Google docs since so limited on what you can do with those programs and don't like how invasive it is but I am strapped for time and can't wait for open source to catch up. I have waited so many years and I have pretty much given up. When my desktops give out I may even consider Apple at this point which I NEVER thought I would do. -
Public Caching Problem with Login Token
Hi All,
I am trying to publicly cache a Portlet on a community (at community level) when using a login token. From my initial testing it looks like any Portlet which has a login token passed (through the webservice) can only exhibit PRIVATE caching and is cached on a per user basis not a per community basis.Can you please advise if it is possible (and if so how) to cache at a public level when using a login token.A speedy response is appreciated as I have a Tuesday deadline to meet (that's right tomorrow)And here is the code for the database connection
import java.sql.*;
import java.util.*;
public class TryConnect_10g
public static void main(String abc[])
String cs = "jdbc:oracle:thin:@255.255.255.255:1234:a000studs";
// String cs = "jdbc:oracle:thin:@255.255.255.255:1234:a000studs";
String user = "123456";
String pass = "123456";
try
Class.forName("oracle.jdbc.driver.OracleDriver");
//Connection conn = DriverManager.getConnection("jdbc:odbc:myOracle");
Connection conn = DriverManager.getConnection(cs,user,pass);
Statement stmt = conn.createStatement();
String query = "SELECT * FROM members";
ResultSet rs = stmt.executeQuery(query);
// ResultSet rs = stmt.executeQuery("SELECT * FROM members WHERE member_id = 'M0001'");
while(rs.next())
String s = rs.getString("member_id");
System.out.println("\n Member ID. : " + s);
System.out.println("\nOracle10g at 255.255.255.255 is working!");
catch(SQLException e)
System.out.println("\n\nException Occured " +
"(Incorrect IP address, Server may be down, or SQL Exception)");
e.printStackTrace();
catch(ClassNotFoundException e)
System.out.println("\n\nException Occured (CLASSNOTFOUND Exception)");
} -
Having problems with login varification SQL!
Hi guys,
I am building a login page using DW's SQL building tool. but
login is failing though all seems well.
I built a simple query to test that it was accessing the
database and that returned the requested data though when I run the
login page I get redirected to the login failure page that I have
put in place! I can't see where the problem is.
Has anybody got any sugestions?
Any help appreciated
Rob FordHi Pete,
Thanx for the input.
I'm not sure which access level you mean.
The username/password I use for the MYSQL Db has been set up
with full privileges and the "login page" dialogue in DW has been
set up with verify by "username and password" only rather than with
the access level option. I have checked all that I can think of
including the entries in the Db to make sure there are no spelling
or case mistakes.
Regards
Rob -
updated to the new os x mavericks, now i'm having problems with my keychain access...everytime i asked to log in but when i do, it says can't find login items even if i reset it. what should i do?
Did you install the latest driver set for the device? there is a new release on motu.com for mavericks.
rachel -
I downloaded OS X Lion on my iMac and I'm having problems with my computer waking up after hibernating. I can get to the login screen but my mouse will be frozen. The only fix's is a hard reboot. Any help would be great!
Try resetting the SMC and the PRAM.
1. SMC
Read this and follow the instructions for your kind of mac:
http://support.apple.com/kb/HT3964
2. PRAM
Follow the procedure below:
1. Power down the machine.
2. Locate the following keys on your keyboard in preparation for Step 4:
command–option–P–R
3. Press the ‘power on’ button.
4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as it should normally. -
Still having problems with VPN access
Hello!
I am having problems with my VPN clients getting access to the networks over a MPLS infrastruture. I can reach these resources form my Core network (172.17.1.0/24) and my Wifi (172.17.100.0/24) but not from my VPN network (172.17.200.0/24). From the VPN I can reach the Wifi network (which is behind a router) and the rule that allows that also allows access to the other networks but for some reason it is not working.
When I ping inside the core network from VPN I can connect and get responses. When I ping to the Wifi network, I can get responses and connect to resources there. A tracert to the wifi network shows it hitting the core switch (a 3750 stack) @ 172.17.1.1, then the Wifi router (172.17.1.3) and then the host. A tracert to a resource on the MPLS network from the VPN shows a single entry (the destination host) and then 29 time outs but will not ping that resource nor connect.
I've posted all the info I can think of below. Any help appreciated.
*** Here is a tracert from a core network machine to the resource we need on the MPLS:
C:\Windows\system32>tracert 10.2.0.125
Tracing route to **************** [10.2.0.125]
over a maximum of 30 hops:
1 1 ms <1 ms <1 ms 172.17.1.1
2 1 ms <1 ms <1 ms 172.17.1.10
3 5 ms 5 ms 5 ms 192.168.0.13
4 31 ms 30 ms 31 ms 192.168.0.5
5 29 ms 30 ms 29 ms 192.168.0.6
6 29 ms 29 ms 29 ms 192.168.20.4
7 29 ms 29 ms 29 ms RV-TPA-CRMPROD [10.2.0.125]
Trace complete.
172.17.1.10 is the mpls router.
**** Here is the routing table (sh ip route) from the 3750 @ 172.17.1.1
Gateway of last resort is 172.17.1.2 to network 0.0.0.0
S 192.168.30.0/24 [1/0] via 172.17.1.10
172.17.0.0/24 is subnetted, 3 subnets
S 172.17.200.0 [1/0] via 172.17.1.2
C 172.17.1.0 is directly connected, Vlan20
S 172.17.100.0 [1/0] via 172.17.1.3
172.18.0.0/24 is subnetted, 1 subnets
S 172.18.1.0 [1/0] via 172.17.1.10
S 192.168.11.0/24 [1/0] via 172.17.1.10
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
S 10.2.0.0/24 [1/0] via 172.17.1.10
S 10.10.10.0/24 [1/0] via 172.17.1.10
S 10.20.0.0/24 [1/0] via 172.17.1.10
S 10.3.0.128/25 [1/0] via 172.17.1.10
S 192.168.1.0/24 [1/0] via 172.17.1.10
S* 0.0.0.0/0 [1/0] via 172.17.1.2
*** Here is the firewall config (5510):
ASA Version 8.4(1)
hostname RVGW
domain-name ************
enable password b5aqRk/6.KRmypWW encrypted
passwd 1ems91jznlfZHhfU encrypted
names
interface Ethernet0/0
nameif Outside
security-level 10
ip address 5.29.79.10 255.255.255.248
interface Ethernet0/1
nameif Inside
security-level 100
ip address 172.17.1.2 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 172.19.1.1 255.255.255.0
management-only
banner login RedV GW
ftp mode passive
dns server-group DefaultDNS
domain-name RedVector.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network WiFi
subnet 172.17.100.0 255.255.255.0
description WiFi
object network inside-net
subnet 172.17.1.0 255.255.255.0
object network NOSPAM
host 172.17.1.60
object network BH2
host 172.17.1.60
object network EX2
host 172.17.1.61
description Internal Exchange / Outbound SMTP
object network Mail2
host 5.29.79.11
description Ext EX2
object network NETWORK_OBJ_172.17.1.240_28
subnet 172.17.1.240 255.255.255.240
object network NETWORK_OBJ_172.17.200.0_24
subnet 172.17.200.0 255.255.255.0
object network VPN-CLIENT
subnet 172.17.200.0 255.255.255.0
object-group service DM_INLINE_TCP_1 tcp
port-object eq www
port-object eq https
object-group network DM_INLINE_NETWORK_1
network-object object BH2
network-object object NOSPAM
object-group network VPN-CLIENT-PAT-SOURCE
description VPN-CLIENT-PAT-SOURCE
network-object object VPN-CLIENT
object-group network LAN-NETWORKS
network-object 10.10.10.0 255.255.255.0
network-object 10.2.0.0 255.255.255.0
network-object 10.3.0.0 255.255.255.0
network-object 172.17.100.0 255.255.255.0
network-object 172.18.1.0 255.255.255.0
network-object 192.168.1.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 192.168.30.0 255.255.255.0
object-group network VPN-POOL
network-object 172.17.200.0 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
access-list Outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq smtp
access-list Outside_access_in extended permit tcp any object BH2 object-group DM_INLINE_TCP_1
access-list global_mpc extended permit ip any any
access-list Inside_access_in extended permit object-group DM_INLINE_PROTOCOL_1 any any
pager lines 24
logging enable
logging asdm informational
no logging message 106015
no logging message 313001
no logging message 313008
no logging message 106023
no logging message 710003
no logging message 106100
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302018
no logging message 302017
no logging message 302016
no logging message 302021
no logging message 302020
flow-export destination Inside 172.17.1.52 9996
mtu Outside 1500
mtu Inside 1500
mtu management 1500
ip local pool VPN 172.17.1.240-172.17.1.250 mask 255.255.255.0
ip local pool VPN2 172.17.200.100-172.17.200.200 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (Inside,Outside) source static EX2 Mail2
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.200.0_24 NETWORK_OBJ_172.17.200.0_24
nat (Inside,Outside) source static inside-net inside-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static LAN-NETWORKS LAN-NETWORKS destination static VPN-POOL VPN-POOL
object network inside-net
nat (Inside,Outside) dynamic interface
object network NOSPAM
nat (Inside,Outside) static 5.29.79.12
nat (Outside,Outside) after-auto source dynamic VPN-CLIENT-PAT-SOURCE interface
access-group Outside_access_in in interface Outside
access-group Inside_access_in in interface Inside
route Outside 0.0.0.0 0.0.0.0 5.29.79.9 1
route Inside 10.2.0.0 255.255.255.0 172.17.1.1 1
route Inside 10.3.0.0 255.255.255.128 172.17.1.1 1
route Inside 10.10.10.0 255.255.255.0 172.17.1.1 1
route Inside 172.17.100.0 255.255.255.0 172.17.1.3 1
route Inside 172.18.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.11.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.30.0 255.255.255.0 172.17.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server RedVec protocol ldap
aaa-server RedVec (Inside) host 172.17.1.41
ldap-base-dn DC=adrs1,DC=net
ldap-group-base-dn DC=adrs,DC=net
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=Hanna\, Roger,OU=Humans,OU=WPLAdministrator,DC=adrs1,DC=net
server-type microsoft
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 172.17.1.0 255.255.255.0 Inside
http 24.32.208.223 255.255.255.255 Outside
snmp-server host Inside 172.17.1.52 community *****
snmp-server location Server Room 3010
snmp-server contact Roger Hanna
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
crypto ikev1 enable Outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
telnet 172.17.1.0 255.255.255.0 Inside
telnet timeout 5
ssh 172.17.1.0 255.255.255.0 Inside
ssh timeout 5
console timeout 0
dhcpd address 172.17.1.100-172.17.1.200 Inside
dhcpd dns 172.17.1.41 172.17.1.42 interface Inside
dhcpd lease 100000 interface Inside
dhcpd domain adrs1.net interface Inside
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
group-policy RedV internal
group-policy RedV attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
default-domain value ADRS1.NET
group-policy RedV_1 internal
group-policy RedV_1 attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
default-domain value adrs1.net
username rparker password FnbvAdOZxk4r40E5 encrypted privilege 15
username rparker attributes
vpn-group-policy RedV
username mhale password 2reWKpsLC5em3o1P encrypted privilege 0
username mhale attributes
vpn-group-policy RedV
username dcoletto password g53yRiEqpcYkSyYS encrypted privilege 0
username dcoletto attributes
vpn-group-policy RedV
username rhanna password Pd3E3vqnGmV84Ds2 encrypted privilege 15
username rhanna attributes
vpn-group-policy RedV
tunnel-group RedV type remote-access
tunnel-group RedV general-attributes
address-pool VPN2
authentication-server-group RedVec
default-group-policy RedV
tunnel-group RedV ipsec-attributes
ikev1 pre-shared-key *****
class-map global-class
match access-list global_mpc
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
class global-class
flow-export event-type all destination 172.17.1.52
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:202ad58ba009fb24cbd119ed6d7237a9Hi Roger,
I bet you already checked it, but does the MPLS end router has route to VPN client subnet 172.17.200.x (or default) pointing to core rtr)?
Also, if the MPLS link has any /30 subnet assigned, you may need to include that as well in Object group LAN-NETWORKS.
Thx
MS -
Having problems with key chain password
I just got my mac book yesterday, and I'm having problems with my keychain password.
My keychain password is not the same as my login password, it won't accept it, so i think i made a typing error.
Each time i go on to safari, it asks for the password, which i don't have. i've tried the key chain first aid, and that still doesn't work. I've also tried keychain access, and that also doesn't work as it asks for the password first!
Is there a way that i can reset it?There are user passwords and Administrator passwords. The only way to check your keychain password is to be the administrator. In an effort to secure my MacBook, I have an administrator account that I don't use at all and I have a user account that is all I use. It is a great way to protect your MacBook info from others.
As to your question, passwords are case sensitive. You can try to change the password by inserting the CD's that came with your MacBook and reset the password. Seeing that you just got it yesterday, you probably don't have much personal information on it yet, you could use disk utility from the CD and reinstall the Operating System.
Good Luck.
Adam -
Having problems with OSX and mail with the servers?
Having problems with OSX and the mail servers? Seems to be happening more and more?
Hello,
Who is your eMail provider, the part after the @ sign?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
You may have multiple entries.
Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server, more than one entry in Keychain for each in/out entry, or a server end problem.
If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users. -
I´m having problems with my wifi an my new Macbook pro. It doesn´t remember the network so every time I log on - I have to "join a network". I have "ticked" the "remember password" box. I´m connecting to a wireless network on an regular Speedtouch router at home. I´m new to Mackintosh.
Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.) -
Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"
Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is. -
Choosing between external and partner application and problem with login
We have an application on Oracle App Server 10.1.3.3 and we have an OID server.
I had taken this for granted that I should define the application as 'Partner Application' and not external application for single sign on.
Now that we need the 'PASSWORD' retrieved by application, we are considering defining it as an external application.
There are at least two problems I have encountered defining the application as external:
1. 'pageConfig:serverDate' is among the login form's inputs in the login page, but I can't set it in orasso 'Edit External Applications' page
2. After login using SSO as external application and when I click on the application's new link, the login page is shown with the username and password field filled, but I have to click on login button anyway (no automatic and invisible login).
I will be very grateful if someone gives a general view on the differences between external and partner, whether in this case external has to be used or partner and finally give some comment on my specific problem with login button and manual login.
Thank youJust some information :
- The problem with LOGIN page exists. I don't have that problem with for example GMAIL when defined as external application, but with my applications in Oracle Application Server.
- There is also another thing I don't understand. The link to external application is something like:
javascript:open_jwindow('../ealogin?ID=76D4766','76');
and couldn't be executed outside pls/orasso
in other words we can't give that to our users, can we? They should login to orassso and see that?
We don't want to involve them in Identity Management...
Any help is appreciated....
Regards -
Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.
This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck
-
I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?
Apple ID FAQ http://support.apple.com/kb/HE37
-
HT1657 I am having problems with sound in my rental movies
We rent movies all the time but lately we are having problems with sound for our movie rentals. We watch the first half hour without a problem than the voice is choppy all the time. Sometimes it is good for five minutes than noting for a while. We have tried everything we could think of with no avail. I could see one movie but the last 5 or so have been the same. Done trying we need to fix this! Help! Any ideas?
First try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If you still have the same issue, it's possible that something is lodged in the earphone jack. This can cause the iPad to think earphones are plugged in when they are not. Use a vacuum to try to suck any dust, lint or other foreign matter from the jack. If that still doesn't work, try CAREULLY using a toothpick.
Maybe you are looking for
-
Where is the file saved after using "Share... DVD..."? Is it saved?
Hi, I burned a 1 hour 41 minute HD program in FCPX using "Share" and "DVD..." It took about 17 hours to compress into a DVD. I made a few copies and quit the process. Now I want to make more copies, but I can't find where the completed file is saved.
-
How to get Immediate Parent Node of UID
Hi, Iam implementing a search criteria over the basis of UID. Suppose if I will have a UID within LDAP Directory then I have to search for its property. If this property is not available within the context of UID then I want UID's Immediate parent so
-
Identifying syntax and logical errors
Hey guys, I'm new to java and I can't figure out this problem as I can't make JDK work with comand prompt for some reason and when trying to write the java in a web page it won't work. Can anyone tell me what the three syntax errors and one logical e
-
Need to reinstall 10.4.7 over recently installed snow leopard... will this be a problem?
need to reinstall 10.4.7 over recently installed snow leopard... will this be a problem?
-
Why did i move! anyone give me some advice for get...
Ok, ill start at the begining, i have had broadband for years, and having been with freeserve, Zen, and most recently sky i decided to move over to BT. This was purely because im cancelling sky TV so it didnt make sense to keep broadband with them. I