HAVING PROBLEMS WITH OS 10.6.8 PRINTING WITH XEROX PHASER. MacPro crashes when printer warms up. Does anyone have a solution? 6360 DN
I've been using Macs since 1984. Have been using Xerox Phaser printers for ten years. But with the last update to OS 10.6.8 last summer, I've had problems with crashing when printing. My MacPro crashes when printing via ethernet prot with Xerox Phaser 6360DN or when the printer warms up. Worked fine with OS 10.6.7. Internet postings suggest this is a common problem for all Mac users with Xerox Phaser printers. Apple put out an update to 10.6.8 to address the problem. I downloaded it but it did not solve the problem. Have tried all the Xerox drivers along with Apple drivers. Can't solve the problem. Xerox says it's an Apple problem. Does anyone KNOW how to solve the problem?
sorry, just saw that i was accidently in the snow leopard section....i reposted under the correct section. here's the link.
http://discussions.apple.com/message.jspa?messageID=12340796#12340796
sorry for the inconvenience, i was looking at other posts using search and didn't realize that i was reading the 10.6 board.
thanks again!!
Message was edited by: Elisabeth Hogrefe
Similar Messages
-
Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you
Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you
-
Any one have a solution on my problem?
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
-
After performing a routine software update this week, I am having problems with both of my email accounts. I am unable to "Reply" to any emails. Does anyone have a solution to this problem?
I am having the same problem also Thought it was my network and reset everything including Apple TV but still the problem is there . I assume now it is down to iOS 8 prior to that was perfect
-
Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?
I'm not sure I understand the connection between iCloud and this problem. Is it simply a problem of coincidental timing (ie, the problem happened after you set up iCloud)? If so, there's almost certainly no connection between these two events.
Where are you getting the files you're trying to open, and what specifically happens when you try to open them? -
I am trying to re-print a portion of a photo enlarged through "poster" in the print dialog box. The original photo printed just fine with the exception of one "page." This is what I'm trying to re-print. I have gone into the Multi- page box clicked on 4 x 4 and then selected the pages I did not want to print. This isn't working as it prints some pages and doesn't print others. All in all it is using a tremendous amount of ink for this project. Additionally I am printing on fabric which involves a deal of time in that preparation. The waste factor is turning into a huge cost. It should just be a simple thing to tell the print dialog box what I want it to do and have it do it. Help, does anyone have a solution?
Hi Pat,
Yes I marked the question as Assumed Answered. I needed to move on. I have never taken part in a forum and couldn’t wait any longer for any input so not wanting anyone to waste the time answering me, I marked the question as assumed answered. I guess this was the wrong thing to do and I apologize to the forum.
I did go another route and loaded and enlarged the photo in Photoshop Elements, Then cropped the photo to the area I needed to reprint. I probably should have done this in the first place!
Again, my apology to the forum for my lack of patience in waiting for a reply.
Diane Harris
Sent from Windows Mail -
Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit. Now it just won't open. When I click on the iphoto icon in the dock, nothing happens! Does anyone have a solution to this problem please?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it does then your current library has been damaged and should be repaired: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Does anyone have a solution to fixing the Facetime echo problem?
I get this echo that occurs only on my end. It's louder than my friends who I video chat with. They use an older model of the MacBook Pro, but they do not have this echo problem. Does anyone have a solution to this?
I have the same problem. If I use an iPad for facetime, it works fine. If I use skype or voip, it works fine. If I use facetime, the other party hears an echo. To fix it 'i have to turn the audio down to inaudible levels. "use headphones" isn't a solution, when it works fine in Skype.
What probably happened is, previous macbooks have had the microphone and speakers sufficiently separate that they've never had to bother with echo cancellation. Now they've screwed up with the positioning on the retina macbook pro and facetime testing never even occurred to them. I've seen plenty of posts about this issue, not a single apple response. Apple really needs to respect their customers more. -
problem opening mail attachments...were opening seamlessly on os 7.0...get an error
Filename
Office open XML document/presentation
File size
Does anyone have a solution? Please help.Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please. -
I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from Adobe and Windows. I have a new pc with window 8.1.
It could be a coincidence, but I rebooted the machine and (knock on wood) PSE13 seems to be working ok.
-
iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?
Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT -
I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?
It is not about payment of $19.95 (Igalsses) or $7.99(webcam settings). This is a very basic setting that should be available in the system settings. The automatic setting of the internal cam does not work great on low lighting as everyone is aware.
i am just amazed how users take in lying down and suggest solutions such as paying for a 3rd party paid app or improving the lighting in your room. -
My display has quit working. Does anyone have a solution for this problem?
I have had my Verizon Jetpack MiFi 5510L for a couple of months now. It has worked fine until a few days ago the display on it started looking strange and now has finally gone blank. Does anyone have a solution for the problem?
You can do both, whatever is more convenient to you. As long as VZW gets its hands on the old device you will be good to go. Replacements under the warranrty require the user to turn in the old device to VZW. If your old device is not returned then you will be charged a fee for an entirely new device. Purchasing a tracking number for a shipment of this kind would be a good idea if you choose to send it in. Otherwise dropping it off at a store is the safest route you can take.
I would suggest contacting VZW phone support on this one and running through your options. The VZW phone rep can coordinate a delivery to your local VZW store if they do not already have one in stock. You can also turn in the old device in person to rule out any non-returned device fees. -
When I try to install PSE11, I keep getting error 1935, does anyone have a solution for this problem
When I try to install PSE11, I keep getting error 1935, does anyone have a solution for
this problem?This thread from the Premiere Elements forum may help:
http://forums.adobe.com/thread/1286807?tstart=0 -
I'm TRYING to try the 30 free trial of Aperture. It downloads fine, but the promised email with serial number (needed to activate) never arrives. I've double checked email address. Anyone have a solution?
This has been reported numerous times in the past. It seesms that from time-to-time the response system responsible for sending the key goes away.
Take a look at the More Like This box on the right hand side of this page. Some users have had success getting the key sent in various ways.
Maybe you are looking for
-
Set and save preferences/default in Save-For-Web?
I used PE2 forever, even as my Mac OS updated. Now, however, on Snow Leopard, I had to get PE8, and I'm a little lost. In PE2, if I used the same custom setting in Save-For-Web, after awhile, it just kept it and that somehow became my default. It was
-
Can No longer see my shortcuts bar in my home scre...
Help! I have a Nokia 5800 and its suddenly gone bonkers. i'm meant to have a shortcuts bar and the top of my home screen...but its gone. ive obviously been into settings > personal > home screen > home screen theme to shortcuts bar..and all the inbet
-
PDF Portfolio on Flash ActiveX
Is there any way to open PDF Portfolio's SWF file in Flash ActiveX (Visual C++ project)? How to implement communications between Flash ActiveX and its container? I know that Adobe has public PDF Reference and PDF portfolio is a part of this, but I ca
-
How is an object created in a workflow ?
Hello, When i create a task and assign an organizational business object to it along with a method. When the workflow is activated then it will call this method, but who will create the object and who will fill up the initial attributes of the object
-
IPhoto 09 folder structure bug
Let me start by saying that I am a big Apple fan. I have a Macbook Pro (end 2006) running 10.6 with a 30 inch Cinema Display, a 23 inch iMac (mid 2007), and an iPhone 3G and a Nano 5th G. I am an Apple Certified Systems Administrator and was also the