Having problems with rendering clipls

I am new to Premier elements, and am having problems with my clips needing frequent rendering. Clips that have been rendered go from green (line) to red when a transition is added or if it is trimmed and must be rendered again. Also rendering seems to take a very long time, sometimes going fast, sometimes going a frame per second or slower. One possible problem is that I am mixing clips from two different cameras, one a HD and the other a standard def camera. I don't know if this is a factor or not.

If your clips are initially importing with a red line your project preset may be wrong - what preset are you using?
After applying transitions or effects it is normal for those segments to go red line.
It doesn't help to use two different types of video in one project. What is your final output intent - DVD or BluRay? If DVD then it would be better to convert your HD material to DV-AVI. See the Gspot link below - analyse both types of clip you are using and post the screen images here.
Some basics:
Install all Windows Updates.
Install latest version of Apple QuickTime (v7.6.7 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.
Install most recent graphics and sound drivers from the manufacturers web sites.
Run Disk Cleanup.
Run Defragmenter.
Temporarily disable any anti-virus realtime scanning.
Use the GSpot Codec Information Utility to analyse the file and post screen image.
Post back here with the necessary information described here: Got a Problem? How to Get Started
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

Having Problem With Inspire 5.1 5300 rear speaker...

After using my inspire 5.1 5300 for few year... right now im having problem with my rear speaker... just one channel was unable to start... Anyone know about repairing for speaker ? I Have try to switch to other channel it seem that just that rear speaker was unable to start... all should be ok... week before i still hearing sound from that rear speaker... but now it was unable to start. Anyone Have Any Idea Please Tell Me. Thank You

Just to clarify, by "FCP 5 friendly source material," he means video files that are a format (codec) that FCP 5 supports. What FCP 5 supports can be found in the EASY SETUP list. If the format you are working with isn't there, say if your footage is H.264 or MP4 or some other web compressed format, FCP won't work properly. It needs to be in an editing codec if you want FCP 5 to work with it.
Also, you need to make sure that your sequence settings match the settings of the footage you are trying to edit. If you add a clip to the sequence, and immediately have to render, that's a big clue to say that something isn't right. You should edit without rendering at all.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu. Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence:
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured

I just updated to new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. when it comes back to tcp x it's black.

I just updated to the new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. When i send a sample to MBL and color grade it , it comes back to final cut pro x all black even after render. By the way on the MBL i am using the GPU rendering, I used before like 4months ago and it was fine. And i don't like to use the CPU because it very slow.

What is the frame rate of the project? At what frame rate was the media recorded? What frame size?
What are the audio settings?
What are the specs of the machine, in particular how much RAM, how is the hard drive connected, etc.?
If possible, post screenshots of the inspector for the project.
It could be related to the audio frequency?

Having problems with adobe premiere 8 freezing. cannot playback my videos. also, when i try to burn to DVD, does not recognize burner.

having problems with adobe premiere 8 freezing. cannot playback my videos. also, when i try to burn to DVD, does not recognize burner. losing my work constantly cause of freezes and crashes.

sunchick116
Thanks for the reply.
Anytime I am getting too far ahead, then let me know and we can work together on putting the essentials together for this troubleshooting.
From your screenshot, you have a Windows 7 apparently 64 bit computer, lots of RAM. That computer would be great for Premiere Elements 11 Windows.
But Premiere Elements 8 is only a 32 bit application running in the 32 bit compatibility mode of your 64 bit system. So all that RAM is excessive in a 32 bit system with its limitation of max supported installed RAM being 4 GB (of which 3 GB or less of that are available).
So, the freezing and such could be explained by limited resources depending how much you have in the project when the freezing occurs and what formats are involved - like AVCHD. The burner not being recognized by Premiere Elements is probably another matter.
Let us start here....another place where you could be getting hit on the resource side of things....
1. Background Rendering and AutoAnalzyer features in version 8 are notorious for grabbing system resources. If you have them enabled, that could account for much of the program freezing. So, please make sure they are not selected.
a. Background Rendering. In the Premiere Elements 8 workspace, go to Edit Menu/Preferences/General, and make sure there is no check mark next to Background Rendering option.
b. AutoAnalzyer. In the Premiere Elements workspace, click on the Organizer tab in the row below the selected Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and uncheck all the option under that.
To get back to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace go to File Menu/Exit.
For most of us, Premiere Elements 8 was unusable without the 8.0.1 Update. Did you install that? Have you ever worked successfully with your Premiere Elements 8 on the computer where it is now? And, was that with or without the 8.0.1 Update?
Let us stop here and see how we are doing.
Lots of other factors to get into including the burner recognition one.
Thanks for looking at the troubleshooting comments.
ATR

Problems with Rendering - Freezing at %50

Hi there
Windows 7
8gb RAM
Intel Core i7 930
Nvideo Gefore GTX 480
I've been having problems with my Premiere Pro CS4 renders. I've recently rendered Photoshop based graphics with LOTS of layers in an HD format without problem.
But now working with 1080p AVCHD, I've been having issues. I've had 2results:
1.) Doing a small chunk (about 450 frames), it has frozen at %50 3 times in a row.
2.) Doing a bigger chunk, it completed the render but then didn't update the sequence window with the green line, playback wasn't working and then moments later the whole program froze.
My exports work completely fine though, just not the renders.
my only thought is, is that I specified I'd be working at 1080i30 (60i) because I'm 90% sure that's what the video was shot in, but maybe I was wrong.

I lied, 30p is just as bad... I can only do 1 opacity fade or 1 video transition.. once I do 2, Premiere stutters and pauses on the transtion, then gets unstuck but the video goes into hyper speed for a second.
I tried updating video card and changing audio, no success.
I have a feeling it's CS4, Adobe rushed CS4 with AVCHD support to get quick sales... the really AVCHD support is in CS5... I mean... Adobe forgot to put in the LPCM audio codec which is AVCHDs main audio codec and is an audio codec that has been around since the 80s...
Frustrating, any other suggestions? I think I'm going to have to reformat, and do a driver by driver/codec by codec installation... maybe I installed a codec I shound't have or something.
*edit*
Also, I'm 90% sure that when trying to render effects, it's the video transitions that Adobe Premiere is getting stuck on during the render... It doesn't make any sense, I can playback the transitions but I can't render them? I can play through one transition completely fine if there is only 1 transition in the entire project, but if I have 2 then all the transitions become choppy?
Like I'm only doing BASIC cut, paste, copy, transition video editing here...

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

HT1657 I am having problems with sound in my rental movies

We rent movies all the time but lately we are having problems with sound for our movie rentals. We watch the first half hour without a problem than the voice is choppy all the time. Sometimes it is good for five minutes than noting for a while. We have tried everything we could think of with no avail. I could see one movie but the last 5 or so have been the same. Done trying we need to fix this! Help! Any ideas?

First try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If you still have the same issue, it's possible that something is lodged in the earphone jack. This can cause the iPad to think earphones are plugged in when they are not. Use a vacuum to try to suck any dust, lint or other foreign matter from the jack. If that still doesn't work, try CAREULLY using a toothpick.

Hi Can anyone help. I'm having problem with FaceTime on my IPAD .It connects but cuts out Simolarly when someone calls me it connects , then cuts out ThanksBrian

Hi Having problem with FACETIME on my IPAD Connects to call but then cuts out , similarly calls in connect & cut out Can someone help. Brian

My ipad is doing the same thing to it won't let me except a incoming call on Facebook and I don't know what to do

I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or atleast maintain the charg over longer periods of time? I have a dc adapter. thanks

I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks

You should be able to use the battery if you get a car type charger which recharges mobile devices.
The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
 Cheers, Tom

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

I am having problem with MDV Studio.

Hello happy guys, whatzup? Guess all ya 'r doing fine? Right!
I am using Dreamweaver from Macromedia Studio 2004. I am having problem with Inserting Record into Access database using the forms I create on my .asp document. I am using IIS and Javascript as my Document Technology. The error I usually have is:
"Technical Information (for support personnel)
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
/site_files/user_regform.asp, line 78
Browser Type:
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/530.5 (KHTML, like Gecko) Chrome/2.0.172.28 Safari/530.5
Page:
POST 41 bytes to /site_files/user_regform.asp
POST Data:
uname=Honesty&pword=admin&MM_insert=form1
Time:
Tuesday, June 02, 2009, 1:49:39 PM"
Please I need assistance on how to solve this problem. Thank you.
Similarly, I don't really know how to write sql strings - I just give commands and Dreamweaver will generate the sql strings. Yet, I still observe errors. But I think, for the sql aspect, I'm undergoing a tutorial note that I downloaded on the internet.
Please help me to solve this error problem at the moment. The sql knowledge is not the problem. I can get that at my leisure.
Thank you.
Eyo Eyo (Nigeria).

It sounds like you do not have an internet connection (wifi arcs in the upper left does not mean you have a connection) since Safari does not work also.. Try the following:
- Reset the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

I am having problems with my itunes, when plugging my iphone or ipod to the laptop - i can see iphone/ipod in the top right corner of itunes but when i click this to the see what is on theis iphone/ipod the option is no longer there, this was working

I am having problems with the new itunes set up ........
when i plug in my iphone or ipod touch it shows in the top right hand corner of itunes
BUT when i click on the shown iphone/ipod the icon its no longer there, i was useing this fine yesterday and it was showing yesterday what is on this ipod and would allow me to add/remove music, but now this option is no longer availlable - i have added a couple of albums to my itunes i can listen to the music from the laptop but cannot sync the ipods to trancefer these albums to the handheld devices -
i have been trying to sort this all day with no luck not sure if there is a problems with itunes or is it something i am doing ????
HELP !!!!!!!!!!!!

BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them

Can any one please help me I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them. I have tried all restoring options but no use. please help me

The mic on my iPhone4 has just quit also. Similar symptoms to yours in that people I'm talking to hear only static or my voice very faintly. The voice/memo recorder also only really records static.
It happened suddenly and seemed to get better after a day or two but then went completely after another day.
I'm returning it to Vodafone New Zealand shortly but will have to wait 5-10 days for a replacement. There are NO Apple accredited means to speed this procedure up in NZ.
We don't even have a single physical Apple Store where you could walk in and talk to a Genius.

Having problems with rendering clipls

Similar Messages

Maybe you are looking for