Having problems with security certificates-can't access sites

I just installed Firefox & am not having problems which result in security certificate error messages. I cannot access Facebook; Pandora, etc.

Which SSL error message do you get?
Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
*https://support.mozilla.com/kb/Secure+Connection+Failed

Similar Messages

Having some problems with security certificates

Hello,
In some pages, e.g. Twitter, and pages that load FB comments sections, I'm having problems with the certificates and the pages won't load. I don't get an option to add an exception either, therefore I cannot access pages.
I have pasted the error details below. Here is some important info for you:
Version: 9.0.1 <-- Upgrading is NOT an option, this is a corporate machine
Connect via proxy: yes
I doubt very much that this is an issue with the connection, as IE and Chrome are NOT having this issue on the same connection.
Error I get:
This Connection is Untrusted
You have asked Firefox to connect securely to twitter.com, but we can't confirm that your connection is secure.
Normally, when you try to connect securely, sites will present trusted identification to prove that you are going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
Technical Details
twitter.com uses an invalid security certificate.
The certificate is not trusted because the issuer certificate is not trusted.
(Error code: sec_error_untrusted_issuer)
Can anyone shed some light? The usual troubleshooting I've come across hasn't helped me much.

Off the cuff it smells of a man-in-the-middle situation to me. As far as I know, Twitter does have a valid certificate, signed by Verisign. That IE and Chrome have no problem with it, could just mean they do not check resp. do let you know.
I'll have to pass here, because I would not know, how to turn this checking off in FX 9.0 - in any case I would think twice before doing it. The place to look would be Options > advanced > Encryption.
Hope somebody else joins us:)
PS: keeping you nailed down to Fx 9.0 version is unsafe - not just for you, but for your company as well.

HT5699 Having problem with security question

Cannot get iTunes card to work having problem with security question

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

Hello! im from argentina. im having problems with my iphone. can my friend take it to usa for a cheking?

hello! im from argentina. im having problems with my iphone. can my friend take it to usa for a cheking?
what do i need to take my iphone to an apple store? just the iphone? or the charger also? what about the ticket?
sorry about my english

If your phone was purchased in the US, yes. Otherwise, no. And, you only need the phone, nothing else.

TS1702 Having problems with Security questions to be able to download from the iTunes store

Having problems with Security questions to be able to download from the iTunes store

Security questions
Read this note for information on how to reset the security questions http://support.apple.com/kb/HT5312
This user tip may also help you Security Questions

Problems with email setup - Can't access security check

Hi all, i've recently aquired a BB Curve 9300 and managed to setup everything but I still have an unsolved problem:
i set up a gmail email account from my provider mobile email setup page (http://mobileemail.vodafone.it) and asked to sync both contacts and calendars.
The email was correctly set up as i can read and send emails but syncronization doesn't work.
My provider's site says:
If you have not already done so, to start calendar and contact synchronization, complete the security activation on your BlackBerry® device:
1. On the Home screen, click the Setup icon and click Email Accounts or Email Settings.
2. After you open the application, the security activation starts. When security activation is complete, calendar and contact synchronization automatically begins.
If i try to do just that (open the menu, click on the set-up icon and then choose the "Email Accounts" icon) the device quickly shows a hourclass icon, hide it and then does nothing.
If i try to access "Email Account Management" from inside the mailbox options i get the following error message:
"unable to open email set-up application. contact your wireless service provider"
I tried contacting my wireless service provider both in-shop and on the phone and their theory is that the email setup application is too new and is not compatible with my version of the blackberry OS (which is 6.0 bundle 2949, the device says it's up to date).
I tried a battery pull but didn't help.
Any suggestion would be really appreciated.
Thanks,
Marcello

Gotcha.
Are you able to access the email account from https://bis.eu.blackberry.com/html?brand=vodauk
If so, delete the email account from there then try adding it using the integrate link on the phone.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Having problems with iphone 3g, can anyone help!!

I bought a secondhand iphone 3G and i am having trouble setting it up, didn't get the booklet that would off come with the phone, the problem is. when the phone is switched on and when the apple logo dissapears the next screen has a usb cable with an arrow pointing to iTunes and a slide bar, when sliding the bar to open the phone i get banner message saying Emergency calls only,
How do i get pass this problem?

set up itunes and have it running on PC
Then plug iPhone into a USB port and iTunes should see it
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
here is a user guide assuming the iPhone is running 4.2.1

Is everybody having problems with Canoscan drivers-can anyone help, please?

After starting with Leopard, my LIDE25 refuses to work, and the window from the toolbox tells me a driver cannot be found, even after redownloading the driver, which, according to the Canon website, is perfectly compatible with the LIDE25 driver. Someone is not being honest, or Apple has made a huge mistake in the bug department. My smart mailboxes don't work either.Can anyone help? I see there are others with Canon scanner driver problems on this forum - what can we do? I'm so tired of fragile scanners breaking down and needing replacement - they are like VCRs in this respect, somehow a crap technology - but this time it's surely not the scanner to blame.

I have a Conoscan 8400F scanner, and after downloading the latest driver it actually works BETTER than it ever has... used to take almost 3 minutes to scan a 8.5 X 11 page, now less than a minute.
Jeff

Problems with security certificate after 6.0.5 update

I recently updated to Safari 6.0.5 on 10.7 and have since experienced problems logging into my ISPs customer section. All I get is the below error message relating to the cecurity certificate:
The first certificate has obviously expired, but it doesn't matter which of the two I select. Access is denied in either case and I'm unable to proceed.
This has only started after installing a recent system update. It's also worth noting that this is happens on both Macs in our home.
For the moment I'm using Firefox, which works fine, but I would like to resolve this if possible.
Any hints would be very much apprecaited.

The server isn't accepting the certificate. You'd have to contact the administrator to find out why.

How do I go back to 3.6 from 4.0. Having problems with Wikipedia and can't work with a shorter display [half screen] good with 4.0. McAffee, Norton and other programs aren't supported on 4.0

I need to go back to 3.6 from 4.0 Because:
1. Norton, some Mcaffee, and other needed programs aren't supported yet.
2. Can't downsize 4.0 to fit properly on a half screen, when using a text editor on one half and 4.0 display on the other half. I have to go to a full screen to do somethings, and then back to half screen after. Things aren't easy anymore.
3. When moving references and extras from Wikipedia to my PC, the reference numbers and other generated items are missing on my PC. Never with 3.6
Things are not easy going with 4.0!!!!!!!

I need to go back to 3.6 from 4.0 Because:
1. Norton, some Mcaffee, and other needed programs aren't supported yet.
2. Can't downsize 4.0 to fit properly on a half screen, when using a text editor on one half and 4.0 display on the other half. I have to go to a full screen to do somethings, and then back to half screen after. Things aren't easy anymore.
3. When moving references and extras from Wikipedia to my PC, the reference numbers and other generated items are missing on my PC. Never with 3.6
Things are not easy going with 4.0!!!!!!!

TS1398 Having problems with security on my Ipad. I believe that someone is randomly getting into my hotmail account because of possible virus on my Ipad. Help

How do I know if I have a virus on my Ipad. Isn't it supposed to be linked with my Desktop. I have an iMac.

You can't have a virus on your iPad! Maybe someone hacked your hotmailaccount.
Change the password of your Hotmailaccount!

HT1338 Having problems with latest software update - update just sitting in "moving items into place". Been like this all night - any suggestions ? Running mount ion lion on a MacBook Pro.

System not moving out of software update.

OSX Mavericks is so riddled with bugs, it's extremely frustrating.
I made the mistake of upgrading to a new rMBP a few weeks ago (which came with Mavericks) and so far I've experienced
random issues with the machine not waking up from sleep
display output garbled
videos freezing when played in fullscreen on quicktime
applications failing to load, with an error code of -600, as well
I've resorted to rebooting my laptop every time I want to use it, or rebooting every couple of hours, because it seems that Mavericks can't handle more than a couple of hours of runtime without crashing.
Apple, get your *** into gear, fix this crap, and find a new quality control team.

I was having problems with video and audio on certain sites like youtube. I edited some settings in Realplayer and have video now, but no audio.

Went into preferences on Realplayer, Download and recording, then unchecked "Enable Web Downloading and Recording...". That got video going, but no audio still. (Interesting that the list of browsers below that check box did NOT include Firefox.

See:
*https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
You can also try to clear the Flash local storage and settings.
*Windows Control Panel > Flash Player, click Delete All and Delete Data
Flash Website Storage Settings panel:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Global Storage Settings Panel:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html
Did you also check the setting in the volume mixer when Firefox is using the flash plugin?
*https://support.mozilla.org/kb/No+sound+in+Firefox

Still having problems with VPN access

Hello!
I am having problems with my VPN clients getting access to the networks over a MPLS infrastruture. I can reach these resources form my Core network (172.17.1.0/24) and my Wifi (172.17.100.0/24) but not from my VPN network (172.17.200.0/24). From the VPN I can reach the Wifi network (which is behind a router) and the rule that allows that also allows access to the other networks but for some reason it is not working.
When I ping inside the core network from VPN I can connect and get responses. When I ping to the Wifi network, I can get responses and connect to resources there. A tracert to the wifi network shows it hitting the core switch (a 3750 stack) @ 172.17.1.1, then the Wifi router (172.17.1.3) and then the host. A tracert to a resource on the MPLS network from the VPN shows a single entry (the destination host) and then 29 time outs but will not ping that resource nor connect.
I've posted all the info I can think of below. Any help appreciated.
*** Here is a tracert from a core network machine to the resource we need on the MPLS:
C:\Windows\system32>tracert 10.2.0.125
Tracing route to **************** [10.2.0.125]
over a maximum of 30 hops:
1     1 ms    <1 ms    <1 ms 172.17.1.1
2     1 ms    <1 ms    <1 ms 172.17.1.10
3     5 ms     5 ms     5 ms 192.168.0.13
4    31 ms    30 ms    31 ms 192.168.0.5
5    29 ms    30 ms    29 ms 192.168.0.6
6    29 ms    29 ms    29 ms 192.168.20.4
7    29 ms    29 ms    29 ms RV-TPA-CRMPROD [10.2.0.125]
Trace complete.
172.17.1.10 is the mpls router.
**** Here is the routing table (sh ip route) from the 3750 @ 172.17.1.1
Gateway of last resort is 172.17.1.2 to network 0.0.0.0
S    192.168.30.0/24 [1/0] via 172.17.1.10
     172.17.0.0/24 is subnetted, 3 subnets
S       172.17.200.0 [1/0] via 172.17.1.2
C       172.17.1.0 is directly connected, Vlan20
S       172.17.100.0 [1/0] via 172.17.1.3
     172.18.0.0/24 is subnetted, 1 subnets
S       172.18.1.0 [1/0] via 172.17.1.10
S    192.168.11.0/24 [1/0] via 172.17.1.10
     10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
S       10.2.0.0/24 [1/0] via 172.17.1.10
S       10.10.10.0/24 [1/0] via 172.17.1.10
S       10.20.0.0/24 [1/0] via 172.17.1.10
S       10.3.0.128/25 [1/0] via 172.17.1.10
S    192.168.1.0/24 [1/0] via 172.17.1.10
S*   0.0.0.0/0 [1/0] via 172.17.1.2
*** Here is the firewall config (5510):
ASA Version 8.4(1)
hostname RVGW
domain-name ************
enable password b5aqRk/6.KRmypWW encrypted
passwd 1ems91jznlfZHhfU encrypted
names
interface Ethernet0/0
nameif Outside
security-level 10
ip address 5.29.79.10 255.255.255.248
interface Ethernet0/1
nameif Inside
security-level 100
ip address 172.17.1.2 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 172.19.1.1 255.255.255.0
management-only
banner login RedV GW
ftp mode passive
dns server-group DefaultDNS
domain-name RedVector.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network WiFi
subnet 172.17.100.0 255.255.255.0
description WiFi
object network inside-net
subnet 172.17.1.0 255.255.255.0
object network NOSPAM
host 172.17.1.60
object network BH2
host 172.17.1.60
object network EX2
host 172.17.1.61
description Internal Exchange / Outbound SMTP
object network Mail2
host 5.29.79.11
description Ext EX2
object network NETWORK_OBJ_172.17.1.240_28
subnet 172.17.1.240 255.255.255.240
object network NETWORK_OBJ_172.17.200.0_24
subnet 172.17.200.0 255.255.255.0
object network VPN-CLIENT
subnet 172.17.200.0 255.255.255.0
object-group service DM_INLINE_TCP_1 tcp
port-object eq www
port-object eq https
object-group network DM_INLINE_NETWORK_1
network-object object BH2
network-object object NOSPAM
object-group network VPN-CLIENT-PAT-SOURCE
description VPN-CLIENT-PAT-SOURCE
network-object object VPN-CLIENT
object-group network LAN-NETWORKS
network-object 10.10.10.0 255.255.255.0
network-object 10.2.0.0 255.255.255.0
network-object 10.3.0.0 255.255.255.0
network-object 172.17.100.0 255.255.255.0
network-object 172.18.1.0 255.255.255.0
network-object 192.168.1.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 192.168.30.0 255.255.255.0
object-group network VPN-POOL
network-object 172.17.200.0 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
access-list Outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq smtp
access-list Outside_access_in extended permit tcp any object BH2 object-group DM_INLINE_TCP_1
access-list global_mpc extended permit ip any any
access-list Inside_access_in extended permit object-group DM_INLINE_PROTOCOL_1 any any
pager lines 24
logging enable
logging asdm informational
no logging message 106015
no logging message 313001
no logging message 313008
no logging message 106023
no logging message 710003
no logging message 106100
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302018
no logging message 302017
no logging message 302016
no logging message 302021
no logging message 302020
flow-export destination Inside 172.17.1.52 9996
mtu Outside 1500
mtu Inside 1500
mtu management 1500
ip local pool VPN 172.17.1.240-172.17.1.250 mask 255.255.255.0
ip local pool VPN2 172.17.200.100-172.17.200.200 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (Inside,Outside) source static EX2 Mail2
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.200.0_24 NETWORK_OBJ_172.17.200.0_24
nat (Inside,Outside) source static inside-net inside-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static LAN-NETWORKS LAN-NETWORKS destination static VPN-POOL VPN-POOL
object network inside-net
nat (Inside,Outside) dynamic interface
object network NOSPAM
nat (Inside,Outside) static 5.29.79.12
nat (Outside,Outside) after-auto source dynamic VPN-CLIENT-PAT-SOURCE interface
access-group Outside_access_in in interface Outside
access-group Inside_access_in in interface Inside
route Outside 0.0.0.0 0.0.0.0 5.29.79.9 1
route Inside 10.2.0.0 255.255.255.0 172.17.1.1 1
route Inside 10.3.0.0 255.255.255.128 172.17.1.1 1
route Inside 10.10.10.0 255.255.255.0 172.17.1.1 1
route Inside 172.17.100.0 255.255.255.0 172.17.1.3 1
route Inside 172.18.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.11.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.30.0 255.255.255.0 172.17.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server RedVec protocol ldap
aaa-server RedVec (Inside) host 172.17.1.41
ldap-base-dn DC=adrs1,DC=net
ldap-group-base-dn DC=adrs,DC=net
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=Hanna\, Roger,OU=Humans,OU=WPLAdministrator,DC=adrs1,DC=net
server-type microsoft
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 172.17.1.0 255.255.255.0 Inside
http 24.32.208.223 255.255.255.255 Outside
snmp-server host Inside 172.17.1.52 community *****
snmp-server location Server Room 3010
snmp-server contact Roger Hanna
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
crypto ikev1 enable Outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
telnet 172.17.1.0 255.255.255.0 Inside
telnet timeout 5
ssh 172.17.1.0 255.255.255.0 Inside
ssh timeout 5
console timeout 0
dhcpd address 172.17.1.100-172.17.1.200 Inside
dhcpd dns 172.17.1.41 172.17.1.42 interface Inside
dhcpd lease 100000 interface Inside
dhcpd domain adrs1.net interface Inside
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
group-policy RedV internal
group-policy RedV attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
default-domain value ADRS1.NET
group-policy RedV_1 internal
group-policy RedV_1 attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
default-domain value adrs1.net
username rparker password FnbvAdOZxk4r40E5 encrypted privilege 15
username rparker attributes
vpn-group-policy RedV
username mhale password 2reWKpsLC5em3o1P encrypted privilege 0
username mhale attributes
vpn-group-policy RedV
username dcoletto password g53yRiEqpcYkSyYS encrypted privilege 0
username dcoletto attributes
vpn-group-policy RedV
username rhanna password Pd3E3vqnGmV84Ds2 encrypted privilege 15
username rhanna attributes
vpn-group-policy RedV
tunnel-group RedV type remote-access
tunnel-group RedV general-attributes
address-pool VPN2
authentication-server-group RedVec
default-group-policy RedV
tunnel-group RedV ipsec-attributes
ikev1 pre-shared-key *****
class-map global-class
match access-list global_mpc
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
class global-class
flow-export event-type all destination 172.17.1.52
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:202ad58ba009fb24cbd119ed6d7237a9

Hi Roger,
I bet you already checked it, but does the MPLS end router has route to VPN client subnet 172.17.200.x (or default) pointing to core rtr)?
Also, if the MPLS link has any /30 subnet assigned, you may need to include that as well in Object group LAN-NETWORKS.
Thx
MS

Anyone else having problems with popups since the new security upgrade? can't get rid of them

anyone else having problems with popups since the new security upgrade? can't get rid of them

You may have inadvertently installed adware. You do not need to download or install anything to fix it. It ought not to be related to any Apple security update.
For a description of how this may have occurred, how to avoid it in the future, and for Apple's recommended actions read How to install adware. Apple's instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

Having problems with security certificates-can't access sites

Similar Messages

Maybe you are looking for