Having Problems With The Neo2 ? Read This!!!!

Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :D

Ok.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world

Similar Messages

Anyone having problems with the Acrobat Reader 11.0.9 update on Win7 X64?

I don't know about anyone else, but I sure am. The symptom I'm getting is that the Acrobat Reader window will sporadically fail to open. Looking at the process list with Sysinternals Process Explorer, I see that an Acrobat Reader task has been launched for every attempted open, but no windows show. After clearing out all of the hung tasks, shutting down and re-launching the program trying to launch Acrobat Reader gives some relief for a while. I have never seen Acrobat Reader display these symptoms before. As a test, I de-installed Acrobat Reader 11.0.9 completely, and performed a complete fresh install of 11.0.8, which works flawlessly (and had been since it was installed). I don't want to go back to 11.0.8 because of the security exposures, but I can't get any useful work done in 11.0.9 because I can't reliably open documents!!! If anyone else knows of an official problem record for this, or is experiencing the same symptoms, or knows of any workarounds, I love to hear about it.
Thanks.
-Mike

It looks like is a memory corruption
APP: acrobat.exe
BUGCHECK_STR: APPLICATION_FAULT_MEMORY_CORRUPTION_LARGE
PRIMARY_PROBLEM_CLASS: MEMORY_CORRUPTION_LARGE
DEFAULT_BUCKET_ID: MEMORY_CORRUPTION_LARGE
IP_ON_HEAP: 62896df0
The fault address in not in any loaded module, please check your build's rebase log at <releasedir>\bin\build_logs\timebuild\ntrebase.log for module which may contain the address if it were loaded.
IP_IN_FREE_BLOCK: 62896df0
FRAME_ONE_INVALID: 1
STACK_TEXT:
00000000 00000000 memory_corruption!kernel32+0x0
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: memory_corruption!kernel32
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: memory_corruption
DEBUG_FLR_IMAGE_TIMESTAMP: 0
STACK_COMMAND: ** Pseudo Context ** ; kb
FAILURE_BUCKET_ID: MEMORY_CORRUPTION_LARGE_c0000090_memory_corruption!kernel32
BUCKET_ID: APPLICATION_FAULT_MEMORY_CORRUPTION_LARGE_memory_corruption!kernel32
IMAGE_NAME: memory_corruption
ANALYSIS_SOURCE: UM
FAILURE_ID_HASH_STRING: um:memory_corruption_large_c0000090_memory_corruption!kernel32
FAILURE_ID_HASH: {50fe489a-6240-e9af-6cec-7a87f3683661}

Hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

Try reinstalling Combo Update.
http://support.apple.com/kb/DL1676
Best.

Hello I'm having problems with the installation of EFI 2.2 my macbook shutdown every time I try to install the actualization is this normal?

Hello I'm having problems with the installation of EFI 2.2 my macbook shuts down every time I try to install the actualization is this normal?

Hello I'm having problems with the installation of EFI 2.2 my macbook shuts down every time I try to install the actualization is this normal?

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

My iPod Touch 3rd Gen is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. Is this a common problem? Is there a fix?

My iPod Touch (3rd Gen) is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. It varies between not responding when I tap the screen and acting as if I double-tap or tap and hold when I tap. Every so often it freezes for a minute or so and then comes back. The scren is constantly changing sizes too such that I often can't see most of the top status bar or other edges. This makes typing almost impossible, ruins most games and generally makes everything difficult, but otherwise the iPod is working correctly. Powering off, shutting down apps, letting it sit have not worked. This has happened once before months ago, but the issue resolved itself somehow. Is this a common problem? Is there a fix?

Try this for the freezing
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
Or if they don't work put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414

I'm having problems with the hyper-links and footer

I'm having problems with the hyper-links (they flicker and also highlight other text on the page) and also the footer space goes on forever in preview site mode, even though I have made it small in the master and homepage and subsequent pages. This only happened after I loaded a MUSE file into the current version of Muse CC as it runs upgrades on the imported Muse file. Please Help Me Adobe Community.

Hi Brad,
I'll do what you mentioned about republishing all files, what Adobe Muse seems to to is run and upgrade when you open an older version .muse file, optimising it.
Hopefully republishing it rather than syncing with the new version might help. I'll do this Tuesday evening when I am back from my client meeting.
I was thinking, is there a way of me rolling back to a previous version of Adobe MUSE CC ? I'm using build Adobe Muse CC (2014.3) but I wish to roll back to Adobe Muse CC (2014.1), as this was the version the site was working properly with.
Thanks Brad.

My ipod touch is having problems with the headphone jack when I rotate a little song stops

my ipod touch is having problems with the headphone jack when I rotate a little song stops

Hey Silverdemon, sounds like a short, most likely in the headphones. Try a different set of headphones with this iPod or try the headphones with a different device. If the problem stops with your iPod or it moves to another device, then replace the headphones. If within 1 year of date of purchase Apple will replace the headphones for free if problem is a defect, not abuse. If the problem continues with a different set of headphones, check the port for damage and foreign debris. If you note debris, attempt to remove it, if damage noted contact Apple and set up an appointment to have it evaluated. if nothing appears wrong, try plugging / unplugging to jack about 12 times maybe corrosion on the contacts if so that should clean it. Next thing to try reset your iPod. After that try restore from backup. Last resort, restore to new. Just make sure you make a full backup to your computer before you restore so no data is lost. If nothing works, contact Apple and set up an appointment to have your iPod evaluated. Good luck, Cheers.

HELP! having problems with the organizer of mediasourc

hi, i am currently having problems with the organiser view of the mediasource 5. the player view is ok. the explore panel keeps blinking and after a while the mediasource auto closes. this has not happened before during the past weeks. also, another weird thing is that previously when it didn't work, a microsoft error appeared. now it just closes without any message. hope you can help, thanks!
oh yar, anyway, whats the email adress of the email support?

What were you doing with the software when the problem occur? A detail step by step description of what you have done is useful.
i was playing music? haha...
first i opened the mediasource(organiser view), then, the explorer panel started blinking like mad... then teh thing auto closes, or a window pops up telling me that there is an error( the usual microsoft error...) then when i click don't send, the mediasource closes...
Did you connect any Zen MP3 player when the problem occur?
sometimes i did, sometimes i didn't. incidentally, do you have to connect an mp3 player to use mediasource?
What is the exact version of your MediaSource 5?
wait lemme check... 5.00.20
What is your operating system? What is the language of your operating system?
my operating system is windows XP, and the language is english.
hope my info has been useful...

TS2634 I bought my iPhone 4s 16gb just a week ago and Im having problems with the frontal camera.. is blurry...

I bought my iPhone 4s 16gb just a week ago and Im having problems with the frontal camera.. is blurry... anyone has experimented this issue too? please let me know!

Did you put a screen protector on the phone or did you pull the protective film off the phone?

Is anyone else having problems with the Canon Online Store?

In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store. They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
Is anyone else having problems with the Canon Online Store?
Why does Canon not care to track reported problems with the storefront part of their web-site?
I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far. Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not. In trying to register that lens, I looked up on the Canon web site where to find the serial number. Since my new lens did not have any numbers there, I was concerned I had been sold a fake. But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was.
Is Canon like that with other problems, as well? Or is their "batting" average better than my very limited experience?
I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral": EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)!
Regards and Thanks,
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

Hi Danny. Thanks for replying.
I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years. And, yes, it is the latest version. Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT? WHEN did Canon STOP SUPPORTING Firefox?
I've been told that there are 2 pending orders in my account. Yet, I NEVER placed those orders! WHY CAN'T CANON SEE THAT THIS IS A PROBLEM???
Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place! But, maybe that's a bit too grown up of an answer for you!
"Award-winning" support??? And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS??? The OSTRICH?
Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
Thank you for your "prompt" attention to this matter!
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿c

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿can you help me

Some things to try...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Is anyone else having problems with the overdrive app not working right after new apple update

I am having problems with the overdrive app. I am only allowed to read about twenty pages of a book and then it tries to load more pages but does not. I have reinstalled the app but have the same problem. Any ideas.

Have to talked to the developer? Gone to their site? Do they have an update out for the newer OS?

Having Problems With The Neo2 ? Read This!!!!

Similar Messages

Maybe you are looking for