Having problems with your epson print after installing Lion?

Go hear for download.
http://support.apple.com/downloads/#epson%202.8
My Macpro wouldnt do a auto software update for some reason.

Hello Becky,
I performed all the windows xp updates when I installed xp.
Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
Thanks for your help,
Sergio
Attachments:
Serg_usf_Screen_Shot.doc ‏550 KB

Similar Messages

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

I have been having issues with my computer lagging after installing lion.

I have been having issues with my computer lagging after installing lion. Can anyone please help me get the issue resolved? I need it in easy to follow language.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I am having awful problems with mouse and trackpad after installing Lion

I have tried 3 different brands of mice and it happens with each one. the mouse clicks and sticks spontaniously and wont let go and hitting esc or trying to click somewhere else doesn't have any effect - it wont let go. And it doesn't seem to matter which program. At forst i thought it was just pwer point but it still happens if I command/tab over to mail or finder. and then I get the stupid wheel of death. power point (or whatever program I'm in) locks up. and then I lose recent edits.
I have a Mac book pro. I have use and external keyboard and monitor when I'm at my office.
When the problem has happened I have tried using the trackpad - but it's like it's dead. No click effect. No help!
I AM REALLY TRYING TO NOT GET ANGRY - BUT I AM READY TO SCRAP LION!!!!!!!!!!!
HELP!!!!!!!!

Thanks for the tip re MagicPrefs! Great app!
Is anyone having trouble with Mac losing the connection to Magic Mouse after the Mac goes to sleep? I am running Mac Mini late 2009 with dual-core 2.0 GHz and 4 GB RAM. Never had any issues under Snow Leopard, only after the upgrade to Lion. Battery is OK (tried fresh ones with no luck).
Turning the mouse off then on does not help, but ocasionally I have been able to get the mouse back by simply using Command+Tab. It does not seem to matter which app is active.

I have problem with my macbook pro after installing lion

i have problem with macbook,after i install mountain lion its totaly go bad,its start to stack,get wery wery slow( i have macbook pro with i7 procesor) and its works like computer 20 years back.what shud i do? can i uninstall lion?? i want that my macbook be the same like before.pleas help me!

You can do some basic diagnostics, first open Disk Utility and Repair Disk Permissions. If that does not help I woudl think you got a corrupt download of ML and need to re-download from the Mac App Store and reinstall. Hopefully you have been backing up and have a stable backup system.

Having problems with Labview 7.0 after installing Windows XP Pro

After updating Windows XP Pro from Windows 98, my programs give me the following error:
The procedure entry point SUnMapLS_IP_EBP_12 could not be located in the dynamic link library KERNEL32.dll
I tried reinstalling Labview 7.0, but to no avail.

Hello Becky,
I performed all the windows xp updates when I installed xp.
Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
Thanks for your help,
Sergio
Attachments:
Serg_usf_Screen_Shot.doc ‏550 KB

Is anyone having problems with numbers and keynote after installing ios7.1?

Neither numbers or keynote will open after I installed ios7.1 on my iPad. Pages and Database open just fine.

I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
The next issue is iMessage as that's playing up and wifi drop out
Good luck

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

Is anyone else having problems with there phone freezing after the 8.0 update?

iis anyone else having problems with there phone freezing after the 8.0 update??

Hello Chefboyharley,
Thanks for the question. After reviewing your post, it sounds like the phone is unresponsive. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Not responding or does not turn on
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I have been having problems with my speaker. After the recent update I am unable to listen to movies or music using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears.

I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

Having problem with typing chinese in OS X Lion

After installing OS X Lion, I am having problem with typing traditional chinese in my own account. Everytime I switch to traditional chinese the computer become extremely slow and the finally freezed. However, when I am using visitor account, I can type in traditional chinese without any problem. How should I fix this?

Normally differences like that between main and visitor accounts indicate a bad .plist in Home/Library/Preferences in the main account. I don't know which one might cause this...

Problems conecting to wireless network after installing Lion

Has anyone had problems conecting to thier wirless network after installing lion.

Has anyone had problems conecting to thier wirless network after installing lion.

Having problems with your epson print after installing Lion?

Similar Messages

Maybe you are looking for