Having publish issues, there might be hope
I have been on the phone with applications and .Mac for the past 1.5 hours. We created a "test" .Mac account and they had me publish a new blank site... everything went through fine, then I switched over to "my" .Mac account and I got the same error I've been having for 2 weeks. They are currently looking at the reason why the Web/Sites folder is not allowing write permissions. I'm hoping this will be resolved shortly.
I will keep you informed to anything new we try.
edit: I've been passed on, to recieve a call back on Monday from the .Mac group; perhaps more phone calls from you that are having problems will get this moved along faster. I had him include in his notes for my case (84884621), that hundreds of people are having this issue.... please make a call (800-275-2273)
Message was edited by: adventurefilms
I am having the same problem since yesterday. I'm so close to going with another web hosting provider. This kind of thing has been going on too long. When you have a web site that people and other bussiness depend on, the host should be rock solid in terms of service and dependability. Here is my log file that I received when the error came up:
===== Sunday, September 30, 2007 3:41:06 PM Canada/Eastern =====
2007-09-30 15:41:19.811 iWeb[1584] FAILED .Mac "_issuePropFindAtPath:withDepth:lookingForProps:" httpStatus:404(Not Found) transactionErrorType:104(kDMResourceNotFound) errorDomain:DAVErrorDomain errorCode:10 file:/Web/.Temporary Web Resources/F4B29D61-6E52-4C30-BE5C-0EB8BE2CF910
2007-09-30 15:41:22.310 iWeb[1584] FAILED .Mac "versionInfoForResourceAtPath:withQualifiers:" httpStatus:404(Not Found) transactionErrorType:104(kDMResourceNotFound) errorDomain:DAVErrorDomain errorCode:10 file:/Web/Sites
2007-09-30 15:41:23.387 iWeb[1584] EXCEPTION RAISED during Publish:
** CPMessageException: An error occurred while publishing file “/Web/Sites”. Try publishing again later.
2007-09-30 15:41:23.387 iWeb[1584] Publish error: An error occurred while publishing file “/Web/Sites”. Try publishing again later.
I am so looking forward to a resolution to this problem as I am sure others with the same problem are having.
Similar Messages
-
I am having some issues getting OS X to mount the hard drive from my old laptop (Windows 7). Is there anything I can do to mount this?
It is not showing on the Desktop or the left colomn of Finder (Set to do both in Finder Prefernces) and is not showing up under the Disk application under Utilities (Sorry can't remember the name off the top of my head!)cjz0r wrote:
...I'm starting to think it is most likely NTFS, am I looking at needing an Application to read the NTFS partitions on the drive?
You should be able to read NTFS formatted drives, just not write to them. For that matter, USB Flash drives generally come formatted NTFS for use with PC's and they have to be able to mount on a Mac in order to reformat them for Mac use. The Windows utilities supplied on those Flash drives will be deleted when the drive is reformatted for Mac use so I routinely copy them to the Mac desktop first before reformatting.
You might look into something like this http://eshop.macsales.com/item/NewerTech/U3NVSPATA/ if the enclosure is an issue. It looks weird but it works. -
I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe product installing. I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked. I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues. Please help.
A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
Mylenium -
Hi, i am having an issue with a basic motion scroll effect.
I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
please note, that i am new to muse, this is my first project ever.
my idea is as following:
when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
so…..
now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
when i am scrolling down the WHOLE logo goes down…. so far so good.
NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
Thanks so much to everyone who actually reads this post and tries to help…….
All the best,
Niki LapanThank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!! -
5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?
I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE! -
Is there anyone having an issue with the apple tv when selecting music from the home screen?
Is there anyone in the community having an issue playing music from the home screen of the apple tv? When selecting the music app my apple tv restarts. If anyone else is having the same issue and has corrected the problem please share the solution.
Working fine here, and have not seen any other reports. I would restore your unit
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support -
I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I have an older version of Firefox 3.6.6 I believe I am having an issue with one of the websites I sign into. Is there any way to update to the newest version. Without losing all my bookmarks and saved pass words?
Hello johngervais, the latest firefox version is 26.0 (today 4 Jan 2014).
note that [https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp Firefox no longer works with some versions of Windows XP], if you have '''xp with sp2 and above''' you can update to latest version, see : [http://www.mozilla.org/en-US/firefox/26.0/system-requirements/ Firefox 26 System Requirements]
if you are able to update to latest version then see : [https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36 Common questions after upgrading from Firefox 3.6]
see also : [https://support.mozilla.org/en-US/kb/firefox-just-updated-why-it-asking-me-update-again Firefox just updated - why is it asking me to update again?]
Don't worry you won't losing bookmarks and passwords after update firefox.
thank you -
"I did fresh restore, reset all setting and reboot the issue still there. I hope Apple don't forget us to solve this issue soon
Oh I've found it meanwhile! The is a 2nd post! So never mind this one! I think lawyerhusain understood he has to let Apple know, if he wants them to know and the technical thing will continue with the 2nd post!
-
error code keeps popping up-the itunes library file cannot be saved. there is not enough memory available. then itunes crashes? anyone else having this issue?
Yes, I'm getting the same issue
-
After updating my 4S to iOS 5.1.1 last night, none of my data applications are working today, nor Siri, iMessage or anything of the like. I'm at a loss as to what might have caused it. Is anyone else having this issue/has anyone found a fix? Everything seems to work fine if I connect to wireless, but if I'm not connected to it then nothing is working. My service provider says everything should be working fine, I still have the 3G symbol and full bars.
Somebody clearly hasn't read the User Guide.
Basic troubleshooting steps are retart, reset, restore from backup, restore as NEW.
If you have tried ALL of these steps and you're still having problems, then you need to bring your phone into Apple for evaluation. -
Just had a fatal crash of my new 1TB fusion drive on my 3 month old Imac 27". Is there anyone elese having this issue? And have you been able to recover data from that Crashed Fushion Drive?
Since it's a new machine, contact Apple's Support, formerly Apple Express Lane and let them deal with it.
-
I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphoneThis sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.
-
I am having some issues with email. My iphone shows 4 emails as unread yet when I look thru all my emails, both on my iPhone5 and my outlook there are no unread emails. How do I clear this up on my phone?
Email does not and has never synced between the iPhone and the computer. It sounds like you may have had your PC set up to use POP3 for e-mail, which will download e-mail from the server and delete it, causing it to vanish from your phone if the phone was set up for IMAP. IMAP provides full synchronization between the server and clients. What you delete on one will vanish from the others. This is the preferred method of managing e-mail as it prevents e-mail from being downloaded, for example, on a PC and making it inaccessible on your phone.
-
I am having an issue...there are 1,106 songs on my iPad 2, and only 430 show up on my iTunes on my PC, and only 647 on my iPhone. I want all 1,106 songs on all my devices. Please help!
You need to transfer the purchased content from the iPad to the iTunes library on the laptop. Read the post from virtualgeo on how to accomplish what you want to do.
https://discussions.apple.com/message/11527071#11527071
If you are running iOS 5 and backing up to iCloud, there is really no need to go through all of that - IMO - but if you want to, it is possible to do so.
If you decide to do this, You will now have iTunes telling you that the iPad has been synced to another iTunes library each time that you sync with the other computer.
Maybe you are looking for
-
ITunes Home Sharing not working
I have an Apple TV purchased around a year ago and have the latest software update installed. I also have two Windows machines, one running Windows 7 64bit, and the other running Windows XP SP3 - both with the latest iTunes software version and Bonjo
-
Payment of Expense Report invoice created from credit card transactions
We are implementing corporate credit cards into iExpenses using the company pay method. When expense reports are created from aquitting credit card transactions and exported into Payables does anyone know if it is possible to pay the expense report i
-
Hi Folks, We are using PI 7.1 in our project and we have a requiremnt for RFC lookup on a table which is on PI ABAP stack. I know that with 7.1, SAP has provided the option of RFC lookup and JDBC lookup as a pre-defined function in message mapping. B
-
I am hoping someone can nail this or point me in the right direction because I seem to be hitting a brick wall... Until last night I was successfully using my file watcher job and then it just stopped "watching" for some unexplainable reason. The fil
-
Vendor as well as customer payment settlement
Hi Guru's I have vendor and customer single party, and operating business to the same party in both module as AR and AP , i mean raising invoice and receiving invoice both, but i need to settle the payment now ( vendor or customer account should show