Having same Unit

I am using BI Content InfoObject 0BBP_PRCUNT (Price Unit) and 0TARG_QTY (Target QTY) in the same InfoCube.
Noticed that both these InfoObjects have Unit 0PO_UNIT (Order Unit) assigned to it.
I am not sure if there will be any problem later when it come to field mapping in Transformation because
two different fields assigned with same Unit.
Please advice.

Hi,
Always deicide the key figures and there units in the cube based on the key figures which are coming from R/3 and there units.
Do not go other way around or it wont help.
->Just see what are key figures which you require in the report and if they are in the R/3 source.
->Make sure that you know key figure units in R/3 and in the data source e.g. base unit or sales unit etc.
->It is possible that different key figures have same unit from source only.
In this case you can have key figures in BW with same unit and map it in the transformation with the source unit.You will get only one option of target currency in transformation.
-> If the key figures from R/3 have different units you must have two key figures with two different units.
In this case you will get only option of two target currency in transformation map it respectively.
try to create key figure with 0unit and 0base_uom in BW as it covers most of the units coming from R/3.
For special cases you can use special units and depdends upon what unit you are getting from R/3.
Since in your case you already have a cube and if the source key figures have same unit values coming up then use same units for both the BW key figures.
Thanks
Ajeet

Similar Messages

Having same issue as dtwaldo1 - but using a PC running windows 8.1 (sorry). Cay you please help? John

Having same issue as dtwaldo1 - utility recognizes unit but when I try to install get error message and try again, Have tried all combinations I can conceive but still get message. My old airport operates OK on same system - but utility does not recognize old model airports. I'm using a PC running windows 8.1 (sorry). Cay you please help?
John

Hi,
If you trying connect two Universal apps through Bluetooth, can you check if the
Windows 8.1 Bluetooth RFComm sample runs fine on both the devices? I successfully tested the Windows 8.1 Bluetooth RFComm sample on Laptop (Windows 8.1) and Windows Phone 8.1 (paired).
Make sure the service which you are trying to advertise/listen is supported by both the devices.
-Sagar

Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too :(

Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

Compare Table Data on 2 different databases having same schema

I need to compare data in all the tables in 2 different databases having same schema.
If there is any difference in data in any table on Database1 and Database2 then I need to update/insert/delete the rows in my table in Database2.
So Database1 is my source database and Database2 is my sync database. I cannot use expdp tables as I am not having sufficient privileges to the database server.
Also I cannot drop and recreate the tables as they are huge.
Can anyone please guide me how to compare data and to write a script to comapre the changes in say Database1.Table1 and Database2.Table1 and then accordingly do inserts/updates/deleted on Database2.Table1?
Thanks

Karthick_Arp wrote:
Do you have a DBLink? If youes you can do this.
1. Login into the Database-2 and run this code.
begin
for i in (select table_name from user_tables)
loop
execute immediate 'truncate table ' || i.table_name;
end loop;
end;This will empty all the tables in your Database-2. Now what you need is to just populate the data from Database-1This might result in error, if any of the tables have referential integrity on them.
From 10g documentation :
Restrictions on Truncating Tables
You cannot individually truncate a table that is part of a cluster. You must either truncate the cluster, delete all rows from the table, or drop and re-create the table.
You cannot truncate the parent table of an enabled referential integrity constraint. You must disable the constraint before truncating the table. An exception is that you can truncate the table if the integrity constraint is self-referential.
If a domain index is defined on table, then neither the index nor any index partitions can be marked IN_PROGRESS.I would go for normal MERGE. Also change the cursor to select table names by first modifying the child tables and then the parent table.

Itunes was working fine. Tries to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue.

Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.

Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated.

HT4623 I can no longer send photos from my Iphone 4G. Also not receiving any photos sent by family members. I did the reset of the entire phone & restored from Icloud backup still having same issue.

I can no longer send pictures from my I phone 4Gs, It's been updated & I reset the entire phone & restored. Still having same issues. Also not receiving pictures anymore either.

Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE!

SOAP Scenario-Sender and receiver having same structure- Mapping Required?

Hi,
We are having a SOAP to SOAP scenario. In that the sender and receiver are having same structure. Is it possible to by-pass mapping and just do the configuration from ID
Thanks and regards,
Siji Anup

Hi Siji,
AFAIK you can skip ESR development. Check the example in this blog When and how to create an scenario in SAP PI without mapping objects.
Regards.

TS1398 I am unable to connect to two different wifi at different locations having same name but different passwords

I am unable to connect to two different wi if at different locations having same user name but different password one is at home other at work

I was able to do a full reset on the router (pushing the tiny button near the power input). Then ran through the setup process and it started working on my device.

ODI to connect with Multiple Foxpro DBF files having same structure.

Hi Experts ,
Need your help on the situation below on ODI 11g .
I Identified my source system as Foxpro ,and there are 20000 users using this fox-pro application and each generates its own output file(zipped with dbf files ) .
Example of DBF file -> User1 : daccount_18356.DBF , User2 :daccount_17536.DBF and goes on ....
1. Please recommend how do i connect or automate this DBF files ?
2. Also its having different file name per user but having same format . ?
Please let me know if any details needed further .
Thanks
Kenny
Edited by: 839100 on Jun 20, 2011 8:11 PM

Ashish,
I have similar issue. we are loading multiple files and getting "java.sql.SQLException: ORA-00942: table or view does not exist" error while inserting a record into staging table. Appreciate if you or any one suggest solution.
we are using following KM-
1) LKM File to SQL
2) IKM SQL CONTROL APPEND.
Thanks

Transporting a request betweem two clients having same number

Hi all,
I took back up of PRD system and restored in Development system.After that I have changed the sid to DEV.our land scape here is two system land scape.
Production sid is:PRD
development sid is:DEV
1.The client number in PRD is 100 and DEV also 100
If i transport a request from DEV to PRD system will I face any problem?
2.If i have a same client number in DEV and PRD will I get any problems in future?
Pls give suggestions
Thanks in advance for all

Hi Nani,
There's no problem in having same client nr. at DEV and PRD. In fact, is the more frequent case!
You'll only have a warning when you import a request, because of this. But no errors will derive.
Best Regards,
JC Llanes.

Running Mac 10.5.8 Updated to FF 8.0 - keeps crashing whenever FF opens - can not launch safe mode either - looks like many people here are having same issue - solutions all keep saying it ha.... see detail

Running Mac 10.5.8 Updated to FF 8.0 - keeps crashing whenever FF opens - can not launch safe mode either - looks like many people here are having same issue - solutions all keep saying it has something to do with roboform 7.6.2 (which is for windows) or the profile. I have created new profile and updated the mac roboform - still no luck - have sent in MANY crash reports with no response ( one was Crash ID: bp-0eea6eb2-aba3-478a-bfb1-8f00d2111110 ) - anyone else find solution other than roboform or profile, or how do i get back to prior version?

Any suggestions?
My mail is still not functioning and crashes everytime I open it or check archived messages.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

Creating new user having same access as that of SYSTEM user in Express Edit

Hi, is it possible in oracle to create a new user having same access as that of SYSTEM user?
If yes what would be syntax?
If not i would like to create a user having most of admin rights likes exporting and importing schemas and all.
How it can be done?
Any help would be appreciated.. :)
I am using Express Edition 11g.

same access as that of SYSTEM usergrant dba to <username>;
Its not exactly system equivalent, sys does grant a few rights directly to system database user but its pretty darn close.
exporting and importing schemasgrant datapump_exp_full_database to <username>;
grant datapump_imp_full_database to <username>;

Creating new user having same access as that of SYSTEM user.

Hi, is it possible in oracle to create a new user having same access as that of SYSTEM user?
If yes what would be syntax?
If not i would like to create a user having most of admin rights likes exporting and importing schemas and all.
How it can be done?
Any help would be appreciated.. :)

Try the below command here "SYF" is the user wchich will be created that will have system privileges: -
CREATE USER "SYF" PROFILE "DEFAULT" IDENTIFIED BY "*******" DEFAULT TABLESPACE "USERS" TEMPORARY TABLESPACE "TEMP" ACCOUNT UNLOCK
GRANT CREATE MATERIALIZED VIEW TO "SYF"
GRANT CREATE TABLE TO "SYF"
GRANT GLOBAL QUERY REWRITE TO "SYF"
GRANT SELECT ANY TABLE TO "SYF"
GRANT UNLIMITED TABLESPACE TO "SYF" WITH ADMIN OPTION
GRANT EXECUTE ON "SYS"."CHECK_UPGRADE" TO "SYF"
GRANT EXECUTE ON "SYS"."DBMS_ALERT" TO "SYF"
GRANT EXECUTE ON "SYS"."DBMS_AQ" TO "SYF" WITH GRANT OPTION
GRANT EXECUTE ON "SYS"."DBMS_AQADM" TO "SYF" WITH GRANT OPTION
GRANT EXECUTE ON "SYS"."DBMS_AQELM" TO "SYF" WITH GRANT OPTION
GRANT EXECUTE ON "SYS"."DBMS_AQ_IMPORT_INTERNAL" TO "SYF" WITH GRANT OPTION
GRANT EXECUTE ON "SYS"."DBMS_DEFER_IMPORT_INTERNAL" TO "SYF"
GRANT EXECUTE ON "SYS"."DBMS_REPCAT" TO "SYF"
GRANT EXECUTE ON "SYS"."DBMS_RULE_EXIMP" TO "SYF" WITH GRANT OPTION
GRANT EXECUTE ON "SYS"."DBMS_SYS_ERROR" TO "SYF"
GRANT EXECUTE ON "SYS"."DBMS_TRANSFORM_EXIMP" TO "SYF" WITH GRANT OPTION
GRANT READ ON DIRECTORY "SYS"."DPUMP" TO "SYF"
GRANT WRITE ON DIRECTORY "SYS"."DPUMP" TO "SYF"
GRANT ALTER ON "SYS"."INCEXP" TO "SYF"
GRANT DEBUG ON "SYS"."INCEXP" TO "SYF"
GRANT DELETE ON "SYS"."INCEXP" TO "SYF"
GRANT FLASHBACK ON "SYS"."INCEXP" TO "SYF"
GRANT INDEX ON "SYS"."INCEXP" TO "SYF"
GRANT INSERT ON "SYS"."INCEXP" TO "SYF"
GRANT ON COMMIT REFRESH ON "SYS"."INCEXP" TO "SYF"
GRANT QUERY REWRITE ON "SYS"."INCEXP" TO "SYF"
GRANT REFERENCES ON "SYS"."INCEXP" TO "SYF"
GRANT SELECT ON "SYS"."INCEXP" TO "SYF"
GRANT UPDATE ON "SYS"."INCEXP" TO "SYF"
GRANT ALTER ON "SYS"."INCFIL" TO "SYF"
GRANT DEBUG ON "SYS"."INCFIL" TO "SYF"
GRANT DELETE ON "SYS"."INCFIL" TO "SYF"
GRANT FLASHBACK ON "SYS"."INCFIL" TO "SYF"
GRANT INDEX ON "SYS"."INCFIL" TO "SYF"
GRANT INSERT ON "SYS"."INCFIL" TO "SYF"
GRANT ON COMMIT REFRESH ON "SYS"."INCFIL" TO "SYF"
GRANT QUERY REWRITE ON "SYS"."INCFIL" TO "SYF"
GRANT REFERENCES ON "SYS"."INCFIL" TO "SYF"
GRANT SELECT ON "SYS"."INCFIL" TO "SYF"
GRANT UPDATE ON "SYS"."INCFIL" TO "SYF"
GRANT ALTER ON "SYS"."INCVID" TO "SYF"
GRANT DEBUG ON "SYS"."INCVID" TO "SYF"
GRANT DELETE ON "SYS"."INCVID" TO "SYF"
GRANT FLASHBACK ON "SYS"."INCVID" TO "SYF"
GRANT INDEX ON "SYS"."INCVID" TO "SYF"
GRANT INSERT ON "SYS"."INCVID" TO "SYF"
GRANT ON COMMIT REFRESH ON "SYS"."INCVID" TO "SYF"
GRANT QUERY REWRITE ON "SYS"."INCVID" TO "SYF"
GRANT REFERENCES ON "SYS"."INCVID" TO "SYF"
GRANT SELECT ON "SYS"."INCVID" TO "SYF"
GRANT UPDATE ON "SYS"."INCVID" TO "SYF"
GRANT EXECUTE ON "SYS"."SET_TABLESPACE" TO "SYF"
GRANT ALTER ON "XDB"."X$PT4PA7MVGH9J9E2BE328FS4HIHF4" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."X$PT4PA7MVGH9J9E2BE328FS4HIHF4" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."X$PT4PA7MVGH9J9E2BE328FS4HIHF4" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."X$PT4PA7MVGH9J9E2BE328FS4HIHF4" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."X$PT4PA7MVGH9J9E2BE328FS4HIHF4" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."X$PT4PA7MVGH9J9E2BE328FS4HIHF4" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."X$PT4PA7MVGH9J9E2BE328FS4HIHF4" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."X$PT4PA7MVGH9J9E2BE328FS4HIHF4" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."X$PT4PA7MVGH9J9E2BE328FS4HIHF4" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."X$PT4PA7MVGH9J9E2BE328FS4HIHF4" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."X$PT4PA7MVGH9J9E2BE328FS4HIHF4" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XDB$ACL" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XDB$ACL" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XDB$ACL" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XDB$ACL" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XDB$ACL" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XDB$ACL" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XDB$ACL" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XDB$ACL" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XDB$ACL" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XDB$ACL" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XDB$ACL" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XDB$CHECKOUTS" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XDB$CHECKOUTS" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XDB$CHECKOUTS" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XDB$CHECKOUTS" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XDB$CHECKOUTS" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XDB$CHECKOUTS" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XDB$CHECKOUTS" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XDB$CHECKOUTS" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XDB$CHECKOUTS" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XDB$CHECKOUTS" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XDB$CHECKOUTS" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XDB$CONFIG" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XDB$CONFIG" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XDB$CONFIG" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XDB$CONFIG" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XDB$CONFIG" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XDB$CONFIG" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XDB$CONFIG" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XDB$CONFIG" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XDB$CONFIG" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XDB$CONFIG" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XDB$CONFIG" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XDB$D_LINK" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XDB$D_LINK" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XDB$D_LINK" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XDB$D_LINK" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XDB$D_LINK" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XDB$D_LINK" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XDB$D_LINK" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XDB$D_LINK" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XDB$D_LINK" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XDB$D_LINK" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XDB$D_LINK" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XDB$H_INDEX" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XDB$H_INDEX" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XDB$H_INDEX" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XDB$H_INDEX" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XDB$H_INDEX" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XDB$H_INDEX" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XDB$H_INDEX" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XDB$H_INDEX" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XDB$H_INDEX" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XDB$H_INDEX" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XDB$H_INDEX" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XDB$H_LINK" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XDB$H_LINK" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XDB$H_LINK" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XDB$H_LINK" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XDB$H_LINK" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XDB$H_LINK" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XDB$H_LINK" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XDB$H_LINK" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XDB$H_LINK" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XDB$H_LINK" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XDB$H_LINK" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XDB$NLOCKS" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XDB$NLOCKS" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XDB$NLOCKS" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XDB$NLOCKS" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XDB$NLOCKS" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XDB$NLOCKS" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XDB$NLOCKS" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XDB$NLOCKS" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XDB$NLOCKS" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XDB$NLOCKS" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XDB$NLOCKS" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XDB$RESCONFIG" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XDB$RESCONFIG" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XDB$RESCONFIG" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XDB$RESCONFIG" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XDB$RESCONFIG" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XDB$RESCONFIG" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XDB$RESCONFIG" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XDB$RESCONFIG" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XDB$RESCONFIG" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XDB$RESCONFIG" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XDB$RESCONFIG" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XDB$RESOURCE" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XDB$RESOURCE" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XDB$RESOURCE" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XDB$RESOURCE" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XDB$RESOURCE" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XDB$RESOURCE" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XDB$RESOURCE" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XDB$RESOURCE" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XDB$RESOURCE" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XDB$RESOURCE" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XDB$RESOURCE" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XDB$WORKSPACE" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XDB$WORKSPACE" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XDB$WORKSPACE" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XDB$WORKSPACE" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XDB$WORKSPACE" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XDB$WORKSPACE" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XDB$WORKSPACE" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XDB$WORKSPACE" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XDB$WORKSPACE" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XDB$WORKSPACE" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XDB$WORKSPACE" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XS$DATA_SECURITY" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XS$DATA_SECURITY" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XS$DATA_SECURITY" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XS$DATA_SECURITY" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XS$DATA_SECURITY" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XS$DATA_SECURITY" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XS$DATA_SECURITY" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XS$DATA_SECURITY" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XS$DATA_SECURITY" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XS$DATA_SECURITY" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XS$DATA_SECURITY" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XS$PRINCIPALS" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XS$PRINCIPALS" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XS$PRINCIPALS" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XS$PRINCIPALS" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XS$PRINCIPALS" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XS$PRINCIPALS" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XS$PRINCIPALS" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XS$PRINCIPALS" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XS$PRINCIPALS" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XS$PRINCIPALS" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XS$PRINCIPALS" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XS$ROLESETS" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XS$ROLESETS" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XS$ROLESETS" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XS$ROLESETS" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XS$ROLESETS" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XS$ROLESETS" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XS$ROLESETS" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XS$ROLESETS" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XS$ROLESETS" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XS$ROLESETS" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XS$ROLESETS" TO "SYF" WITH GRANT OPTION
GRANT ALTER ON "XDB"."XS$SECURITYCLASS" TO "SYF" WITH GRANT OPTION
GRANT DEBUG ON "XDB"."XS$SECURITYCLASS" TO "SYF" WITH GRANT OPTION
GRANT DELETE ON "XDB"."XS$SECURITYCLASS" TO "SYF" WITH GRANT OPTION
GRANT FLASHBACK ON "XDB"."XS$SECURITYCLASS" TO "SYF" WITH GRANT OPTION
GRANT INDEX ON "XDB"."XS$SECURITYCLASS" TO "SYF" WITH GRANT OPTION
GRANT INSERT ON "XDB"."XS$SECURITYCLASS" TO "SYF" WITH GRANT OPTION
GRANT ON COMMIT REFRESH ON "XDB"."XS$SECURITYCLASS" TO "SYF" WITH GRANT OPTION
GRANT QUERY REWRITE ON "XDB"."XS$SECURITYCLASS" TO "SYF" WITH GRANT OPTION
GRANT REFERENCES ON "XDB"."XS$SECURITYCLASS" TO "SYF" WITH GRANT OPTION
GRANT SELECT ON "XDB"."XS$SECURITYCLASS" TO "SYF" WITH GRANT OPTION
GRANT UPDATE ON "XDB"."XS$SECURITYCLASS" TO "SYF" WITH GRANT OPTION
GRANT "AQ_ADMINISTRATOR_ROLE" TO "SYF" WITH ADMIN OPTION
GRANT "CONNECT" TO "SYF"
GRANT "DBA" TO "SYF" WITH ADMIN OPTION
GRANT "MGMT_USER" TO "SYF"
BEGIN
dbms_resource_manager_privs.grant_switch_consumer_group(
grantee_name => 'SYF',
consumer_group => 'SYS_GROUP',
grant_option => FALSE
END;
BEGIN
dbms_resource_manager.set_initial_consumer_group(
user => 'SYF',
consumer_group => 'SYS_GROUP'
END;

Having same Unit

Similar Messages

Maybe you are looking for