Having To Turn Turn GPS Off and On Again

Are any other users having to turn Location Services off and on again in order to use Google Maps or other Location Services-based Apps?

Issue fixed in subsequent updates.

Similar Messages

  • While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

  • HT4095 I have tried to download 2 movies onto my iPad but I keep getting a download error message. What do I do now? I have already tried turning the iPad off and on again-still nothing.

    I have tried to download 2 movies onto my iPad but I keep getting a download error message. What do I do now? I have already tried turning the iPad off and on again…still nothing.

    Try closing iTunes and reset your iPad. After the iPad starts up, try the download again.
    To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the iTunes app then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My Internet keeps freezing, once turn the ipad2 off and on again it okay for a while. Any ideas?

    My Internet keeps freezing, once turn the ipad2 off and on again it okay for a while. Any ideas?

    If you are using Safari then try clearing its cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HP LaserJet P1102w will only print wirelessly if I turn the printer off and on again

    I have 2 Laserjet P1102w that work fine printing through USB.  However, I was hoping this printer could become the standard wireless printer for individual users in the office.  I have setup 2 different printers wirelessly with their own static, reserved IP addresses and they are connected to our wireless access point (WPA).  We have  all laptops that are connected to the network via the same access point as well as through hard wired ethernet.  In all cases, they are on the same subnet.
    Once I connect any laptop to one of these printers wirelessly through either the "smart install" client or the latest regular installation exe off of HP's site, it will print fine initially.  However, whenever I undock the laptop or even just wait a few hours, the connection will be lost and I cannot print.  The queue just says "Error - Printing" when I print sometihng.  No errors in the logs.  The connection will come back if I turn off the printer and turn it back on.  This is very annoying and will probably not be acceptable to the users.
    So I wanted to do more testing and connected both printers to my laptop wirelessly and made sure they could print successfully.  I opened 2 command windows and ran a ping -t on each IP address to see at what point the connection dies.  The ping will reply until I undock and go from hard wired / wireless to just wireless.. then it will say "Destination unreachable" and I can't even access the web interface. Even if I redock to hard wired / wireless, I still can't print unless I restart the printer.
    This happens on 2 different laptops with 2 different p1102w printers.  Any clue as to what's going on here and how I can fix it?
    Edit:
    If I have both wireless and nic enabled, once I undock the laptop, the ping -t changes from replying to the ip of the printer, to replying to the address of the wireless adapter with "Destination host unreachable".
    For example:
    IP of printer: 192.168.2.95
    IP of wireless adapter on laptop: 192.168.2.25
    ping 192.168.5.95
    Reply from 192.168.2.95
    Reply from 192.168.2.95
    *undock"
    Reply from 192.168.2.25 Destination Host Unreachable
    Reply from 192.168.2.25 Destination Host Unreachable
    This does not happen if I disabled the nic and run only off the wireless card.  So the workarounds are to either turn the printer off and back on if I undock every time, or disabled the nic.
    At this point, I just want to understand why it is like this?

    Mowaffaq, you may want to determine whether you are making those changes in the master printing preferences (versus the adjusting the session printing preferences from within your application).
    Click "Start", click "Printers and Faxes" (or "Devices and Printers"), right-click your printer, and select "Printing Preferences". On the "Paper/Quality" tab, you should be able to specify A4 as your default paper for all future print jobs.
    Hope that helps.

  • Every time i need to print something, I've to turn the print off and on again, any solutions?

    Ok, I have a HP D110, installed wirelessly on a laptop mac OS X, everything works well, besides every time I need to print something, I've to turn the printer off and on to start print, like on a gap of 5 min. between jobs I have to do it, when it suppose to wake up as soon as you send a job to print I guess. I don't wanna have to go where the printer is all the time I need to print some, otherwise I'd use the cable connection, if anyone have solutions or experience the same prob, I'm looking for answers to solve this.
    Thank you. 
    Alfred!

    Hi Alfred,
    Please check for any available firmware update:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02836005&cc=us&dlc=en&lc=en&product=4023246&tmp...
    Make sure to install the latest firmware and check for any change.
    If the same behavior persist, please let me know what router you are using in order to better understand any possible cause.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • My iPhone 4s constantly locks in the lock screen, I can't unlock until I turn the device off and on again. There's some solution?

    Sometimes, when the device is locked, I can't unlock, I can't slide my finger horizontally, just vertically. When I turn it off and on again, it backs to normality.
    It appears to be "frozen", but I can turn it off.
    I thought that it may be happening by low free space, but there's 'bout 3.4 GB free.
    I've realized that when I use Siri and voice commands it happens more.
    Somebody can help me?
    Thx a lot

    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Every so often the the screen enlarges by itself and the only way I found to correct it, is to turn the phone off and on again.

    Just tried everything I can think of pinching to make it smaller and other gestures etc. none work. The phone is still usable but you have scroll around to find what you want on the desktop.

    Try checking Settings > General > Accessibility > Zoom and turn it OFF.

  • My IPhone 5s camera isn't turning on, the screen is black for every app I use for the camera and none of them work. I've turned my phone off and on again and that didn't work and I also tried resettingy phone. Any suggestions on how to fix it?

    IPhone camera isn't working.

    if the camera stays black when trying to use it in any application it is likely a hardware issue at that point because the aperture on the camera isn't opening. the only way to is that is by actually having the iPhone repaired through an apple store or through contacting apple support and going through a mail in repair.
    if the iPhone is out of warranty though there would be a cost to have it repaired and it may end up being cheaper to take it to a third party to have them repair or replace just the camera.

  • Share does not show up even after turning home sharing off and on again.

    I cannot share movies between my computers.  The Share item appears in list after resetting Home Sharing but disappears reight after.

    Hello, lrc2. 
    Thank you for visiting Apple Support Communities.
    Here is an article I would recommend taking a look at.  Try all of the steps in this article and if you are still experiencing the issue, see step 9.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Cheers,
    Jason H.

  • My iPhone 4s keeps loosing reception now and again i have to put it in aeroplane mode for it to come back again sometimes i have to turn the phone off and on again for it to be normal. solution please

    i am looking for som answers and am sure other iphone 4s users may have the same problem. this has only started to happen to me since i updated to ios7..

    Rome,
    I would try everything that "Diesel" has suggested !!!
    I had the same problem after updating to iOS 5.1. I was never able to fix it. I did however find a work around and that was to delete the offending Wi-Fi configuration and then under "Other" manually add back my Wi-Fi connection. This solved the auto re-connect problem. I don't think this is a fix but a pretty darn good work-around.
    I talked to Apple about this problem while arranging for a replacement phone (for another problem) and the Technician seemed to be aware of this quirk and suggested that my fix was about the best I could expect.
    HOWEVER - when I received my replacement phone not only did the problem that I exchanged the phone for now function correctly but the "Auto-reconnect" of the Wi-Fi worked as expected and as it did prior to the iOS 5.1 update.
    Go-Figure !!!

  • HP Photosmart 7515 wireless printer reverts to Offline, won't print until turned off and on again.

    All of the software is installed and it worked without any problem.  The problem appears to occur after the computer has gone into standby.  The only way I can get anything to print is to turn it off the printer and then turn it back on again.  The troubleshooter simply tells me that the printer appears to be off (which it isn't) and tells me to turn it on.  Is there any way to bring an offline printer back online without either rebooting the whole system or turning the printer off and on again? Needless to say, this is very annoying. I have never had this problem with any other printer.

    CampValdez, did you ever solve your problem?  I'm having a similar problem with a Photosmart 7525.  I just returned a 7510 because of the same problem and now the 7525 won't work.  I've spent the better part of 3 days on the phone with HP tech support to no avail and I'm ready to take the 7525 back.  The software and printer have been reinstalled many times.  I've changed the printer IP to a static IP.  I've removed my Norton security software, I've tried to set it up on another computer, I've changed the channel on the router to channel 11 and nothing works for more than 10 minutes.  The blue light on the printer indicating that it is on the network always is steady blue.  I can get it to work by pressing the wireless symbol and then turning off the wireless and then turning it back on.  When it's working I can access the printer from my web browser with the printer's IP.  It seems once it goes to sleep, I cannot access the printer from the browser.  Touching the screen and waking up the printer does not restore the communication between the computer and the printer.  Since this problem persists with two printers and two different computers, I'm suspecting a router setting but I'm stumped.   If you find your solution, I bet it's the same problem I'm having.   It's unbelieveable that HP tech support seems clueless.  A search shows this is not an uncommon problem. 

  • The home button does not respond and when I turn on phone it activate voice control. I have to turn the phone off and back on to access another app

    my iphone 4 home button is not working anymore. I have to turn the phone off and on again to access an app. When turning it on it immediately goes to voice control. I cannot get out of this. I have checked and updated the software and finally reset the phone. All this has left me with the same problem. Any ideas???

    Voice Over Fix
    Settings > General > Accessibility > Voice Over > Off
    Or,
    Press the Home Button 3 Times
    Now...
    Reset your phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Is power off and on again the same as 'reboting' iPhone?

    To reboot the iPhone due to playing a big game or whatever other reason - To refresh lets say.
    Is turning the power off and on again the exact same thing as holding down power and the home key together?
    Is there really any difference?
    -Frankie

    This is what I tell everyone.
    Think of it this way, the iPhone is more of a computer than a phone. It suffers from being a new OS and nobody can deny there are not bugs and memory leaks. The longer left running, the more things start to fail or slow down (I have had the iPhone since day one of original phone and I am just speaking from my experience). Thus I equate it to like when Windows95 came out...not sure of your age or if you remember those days...but back then it was a running joke of how many days you can keep Windows 95 running before you had to reboot. I am sorry to say but the iPhone is the same way right now (but getting better with a few hiccups back during the 2.0 release). So for me, I reboot daily when I leave in the morning and take it off the charger. By doing so I rarely see any lag or problems.
    A reset/reboot is:
    Go to Home Screen
    Press and Hold Home Button
    Keep holding and press and hold Lock Button
    Keep holding Both
    You will see Slide to Turn Off (Don't let go to slide, just keep holding)
    The phone will turn off (in time, but screen will look like it has some white lines)
    Keep Holding
    When you see the Apple Logo, you can let go.
    Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer.
    You may also wish to read this tread about reboots and odd application behavior.
    http://discussions.apple.com/message.jspa?messageID=5851978#5851978

  • I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?

    I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

Maybe you are looking for

  • Problems setting up WiFi in Linux Mint 6

    Hey Guys, I'm running a 32bit version of Linux Mint 6 on my T60. I need a hand setting up my wireless connection. It boggles my mind, I am able to see the wireless network in my 'available networks' option. I am just not able to connect to it. Anyone

  • Which Mac should I upgrade to if I am a Photoshop, Illustrator, and Indesign user, with a little iMovie thrown in?

    I've been using a 24" iMac (originally purchased in mid-2006) to do graphic design with Adobe Creative Cloud, primarily Photoshop, Indesign, and Illustrator. I am also starting to do some very ametuer video prep (like iMovie) etc. With just Photoshop

  • 64GB MicroSDXC on Macbook Air 11

    I recently purchased a MicroSDXC reader and paired it with a 64GB.  My Macbook Air 11" on Mountain Lion is not recognizing the card. Paired with a 32GB MicroSDHC card, it is recognized just fine.  From reading some posts here, it looks like SDXC shou

  • Ipad3 Email arrives without Content

    Some of of my pop3 Mail arrives without Content. Some mail arrives with content. What can be the problem?

  • How to share mutually editable calendar?? pls tell me.

    we are a small business. we need to be able to upload and edit a group calendar. how to do this? can it be done on .mac? what are the commercial servers that allow this to happen? we dont have our own network server. pls help! thanks