Having trouble adding action script to button symbol

Hello everyone:
I am hoping someone will read this as I am a developer in
'dires straits' with Flash ( a newbie). My problem regards a
layer called "button" which has already been converted to symbol
and turned into an invisible button. The problem lies when I try to
use the selection tool to select it so that I can add action script
to it. Instead of the actions dialogue box saying "actions-button",
it says "actions-frame", and as a result, the action script doesn't
work. I don't know what to do, it should be simple to select it but
something is wrong. If you feel a need to help a developer in need,
you can email me at [email protected], and I can e-mail
you the file so that you can help. Thanks, or you can call me at
310-867-5167
Corinna

Can you plant the fla file on a server and provide a link to
it? Zip it up first if possible.

Similar Messages

I am having Trouble adding Audiobooks in iTunes 12

Hello, I am having Trouble adding Audiobooks in iTunes 12.1.2.27 with OSX Yosemite 10.10.3, I downloaded 4 Audiobooks from Audible, Synced my iPod but the new Audiobooks do not show up in either the Audiobooks or Music section of my iPod after I sync my iPod, I do see them in the Audio section of iTunes but not on my iPod, any help would be greatly appreciated. thank you Michael

I do have an icon of my iPod but if I click on it it disconnects my iPod from iTunes.
If the iPod is connected via Wi-Fi, please connect with USB. If it's already on USB, or if USB is the same. log out or restart the computer and also restart the iPod, then try again. If it still doesn't work, see below.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

HT4623 I have updated to ios7 and am having trouble adding appointments to my calendars??

I am having trouble adding appointments to my various calendars. No probems before ios7 update. What am I doing wrong??

iPhone 3G IOS 4.2.1 is the latest & greatest. There's no more updates for this iPhone.
You have to buy a new iPhone since most apps target IOS 6 & IOS 7.

Having trouble adding purchased and imported music to my playlists

I'm having trouble adding purchased and imported music to my play lists. For example when I purchase or import new music to my playlists I have to re sync my ipod or the new songs don't appear on my playlists. Perhaps this is because I once unplugged my ipod w/out first disconnecting it. Previously when I purchased and imported music songs would appear on my play lists when I dragged them from purchased to playlist.

Remember to authorise your new machine with the Apple ID
Essentially copy the itunes folder and all sub folders over to the same place in the new computer.
Windows XP: C:\Documents and Settings\username\My Documents\My Music\iTunes\
Windows Vista: C:\Users\username\Music\iTunes\
Windows 7: C:\Users\username\My Music\iTunes\
Windows 8: C:\Users\username\My Music\iTunes\

I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.' Where exactly is it located?

I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.' Where exactly is it located? Here is the link which gives the instructions but doesn't seem to say where the 'Modify Settings Button' is located: http://support.apple.com/kb/PH12526?viewlocale=en_US

You have to choose – one settigf or another.
The thing is.your HD clips will look better in an SD project than your SD clips will in an HD project.
WIthout knowing much more about your project and the kind of content, it's really hard to be specific. But generally I'd let my project settings be guided by what fraction of my timeline will be made up of HD clips and how much SD clips. If it's 75% HD, I'd probably do an HD project…and so on,
Good luck.
Russ

I am having trouble adding art work for itunes 12.0.1.26

I am having trouble adding art work for itunes 12.0.1.26. Trying to add artwork after you go into "get info" and then "add artwork" doesn't work. Can anyone help. BTW, went into the authorization edit and gave my user id permission to modify things as was suggested in one posting, but that didn't work either.

thanks a lot

Having trouble adding my Mac Pro Tower to my Apple ID not sure why it does not work

Having trouble adding my MacPro Tower to my Apple Id will not allow me to download the music and videos I purchase on my Iphone or IPad... Very frustrated with apple....

Tank 64 wrote:
My Daughter changed her Apple ID, not sure why. Then she changed it back to the original. She has lost $50 on her iTunes. How does she restore the funds?
How did she change her AppleID?
If she simply updated the AppleID (not created a new one with a new email address), log out then log back into iTunes store.

I am having trouble adding a gmail account on my iPad..I keep receiving same response that the user name and password are in correct and that mail cannot be retrieved. I know the username and password are correct. Any suggestions?

Having trouble adding a gmail account on my iPad. This would be a second email account. Keep receiving message that says username or password are incorrect but I know the are accurate. Any suggestions?

You might be better off deleting the account and starting all over again with the account. Here is a gmail help site that will take you through all of the set up steps.
http://support.google.com/mail/bin/answer.py?hl=en&answer=77702

Having trouble adding information to a join table

I am building a Proof-of-concept HR application in Apex using the hosted site and having trouble entering information into a join table. There are three tables in my schema: Applicants, Postings, and ApplPostings
"Applicants" fields: Applicant_ID (PK), Name, Address, City, State, Zip, Phone, Email
"Postings" fields: Posting_ID(PK), Posting_Number, Item_Number, Posting_Date, Title, Description
"ApplPostings" fields: Appp_ID (PK), Apply_Date, appl_appl_id (FK), post_post_id (FK)
I have 5 pages in my application
1. A Report that shows all Applicants
2. A Form that shows Applicant details and allows editing
Contains 3 regions: Applicant Detail, Associated Postings, Available Postings
3. A Report that shows all Postings
4. A Form that shows Posting details and allows editing
5. A Form that allows creating an entry in ApplPostings
On page #2 (from the list above, it's p3 in my app), the "Associated Postings" region shows data from the Postings table for selected applicant per the ApplPostings table. This is the SQL:
select jp.posting_number,
jp.posting_date, jp.title
from applicants ja,
applpostings jap,
postings jp
where ja.applicant_id = jap.appl_appl_id
and jp.posting_id = jap.post_post_id
and ja.applicant_id = (:p3_applicant_ID)
The "Available Postings" region uses this SQL to show information on the remaining postings:
select jp2.posting_id, jp2.posting_number, jp2.posting_date, jp2.title
from postings jp2 where JP2.POSTING_ID
not in
(select jp.posting_id
from applicants ja,
applpostings jap,
postings jp
where ja.applicant_id = jap.appl_appl_id
and jp.posting_id = jap.post_post_id
and ja.applicant_id = :p3_applicant_id )
The Posting ID column in "Available Postings" is set up as link to page #5 (from list above, p7 in my app)
This page shows three fields: Apply_Date, appl_appl_id, post_post_id
Source information for appl_appl_id:
Source used: Always
Source type: Item
Source value or expression: p3_applicant_id
Source information for post_post_id:
Source used: Always
Source type: Item
Source value or expression: p3_posting_id
Both ID fields populate with inherited values correctly.
The problem is when I try to use the Apex generated "Apply Changes" button
Nothing happens, there is not data added to that table.
I get the "Action Processed" message, but the row is not created in the ApplPostings table.
Any suggestions on what to do next will be helpful.
Thanks,
Jody
Edited by: user10651585 on Dec 31, 2008 9:41 AM

Hi,
On the form, any items that represent database columns must use "Database Column" as the Source Type and the column names as the Source Value or Expression. The "Fetch Row..." and "Process Row..." processes refer to these to determine where to write the data. So your first step is to change the two page items to use these settings. Without these settings, there is nothing to write into the table - the "Action performed" message will be displayed because there is no SQL error.
Now, on your report, your link should pass in the two values needed. In the Column Link settings for the column you are linking on, you have three pairs of fields headed Item 1, Item 2 and Item 3. Each item has a Name and Value setting. Into the Name setting enter in the page 7 item names. Into the corresponding Value setting enter in the column names that contain the values these items need to receive, surrounded by # symbols (for example, #POSTING_ID#).
Then, when you click on the item in the report, you are passed to page 7 and the fields are correctly populated. As the form correctly identifies these fields as database columns, when you click Apply Changes, the insert can take place.
Andy

Problem with action script to button

Hello all.
I'm having a problem with my adobe flash CS3 action script. My button cant link to the other URL. I tried to put an action script but i fail. anyone can help me? here the attachment for my flash document.

HELLO,
just check navigateToURL()

Action Scripting for button

I created a little 'movie clip' of a continuous animation and
want to make it a button that can be used in dreamweaver. I was
told I would have to link it from flash (as dreamweave can not link
a swf file to a webpage). I was having a problem trying to action
script the movie clip - when I selected the 'movie clip' graphic it
said: Current selection can not have actions applied to it. How
should this be done?
Thanks

you're right - that should work. my first thing that i test
when something like that happens is that every keyframe in the
tween contains exactly the same instance. A common problem is that
the instance name of the clip may be slightly different(eg a space
somewhere) in different keyframes.
Rather than looking for the problem, I usually just clear the
keyframes in the tween and then put them back in. In your case I
cleared the keyframe on frame 12 on layer "see more" and then
inserted keyframe(returning it to color: None) and tested the
movie. The button works fine!
So then i went back to your original movie to try to find
what was inconsistent between the two keyframes in 'see more' and
couldn't find the problem... so anyway, this looks like a situation
where we may not know the reason for the problem but at least we've
found the solution...

7.1 having trouble hitting call and end button

I hate the buttons and grey background on my apps in 7.1!

Thank for the quick reply!
There were 2 things I did wrong and both of them you pointed out.
I left off sid in the url and did not include the jar in my
project. Now it works!
Thanks again!
Frank
JDeveloper Team (guest) wrote:
: Hi Frank,
: couple of things to look out for
: - >create a database connection through the connection manager
in
: JDeveloper using your parameters 127.0.0.1 (host ) 900 (port)
: 2481test(sid). ( I grepped this from your error message)
: See if the connection is successful and you are able to see the
: deployed ejb.
: -> second make sure you have added the client side generated
jar
: files as part of your project properties for the project.
: regards
: raghu
: Frank Zhang (guest) wrote:
: : Hi All:
: : I used JDeveloper 2 to deploy the helloworld EJB sample. The
: : deployment wnet well and I am able to see test/Hello object
: under
: : Published JServer Objects. However, I am having trouble to
call
: : Hello thru the Client application and got the following
error:
: : javax.naming.CommunicationException: Unknown service:
: : 127.0.0.1:900:2481test
: : at
oracle.aurora.jndi.sess_iiop.SessionCtx.initialContext(Compiled
: : Code)
: : at
: : oracle.aurora.jndi.sess_iiop.SessionCtx.<init>(Compiled Code)
: : at
oracle.aurora.jndi.sess_iiop.ServiceCtx.createSession(Compiled
: : Code)
: : at oracle.aurora.jndi.sess_iiop.ServiceCtx.login(Compiled
: : Code)
: : at
oracle.aurora.jndi.sess_iiop.ServiceCtx.defaultSession(Compiled
: : Code)
: : at
: : oracle.aurora.jndi.sess_iiop.ServiceCtx.lookup(Compiled Code)
: : at
oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(Compiled
: : Code)
: : at
oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(Compiled
: : Code)
: : at javax.naming.InitialContext.lookup(Compiled Code)
: : at Client.main(Compiled Code)
: : Any helps are greatly appreciated!
: : Frank
null

Action Script and button Behavior

Imported a bmp as png, made it into a movie clip. Setup the
AS to call for page 4. It works great. I would now like to have a
text box come up on the rollover. I tried to nest the mc into a
button. I can make the text box work but the script won’t
work when I click.
Could you refer me to a resource that would explain the
relationship between the two. Or is there another way to do this.
So the text box says “Click here for more Info”.
Can’t click to execute Action Script, I think it is not
addressable because it’s nested in the button.
If I reverse the nesting then the text box in the over frame
won’t execute.

Mjddoyle wrote:
> Imported a bmp as png, made it into a movie clip. Setup
the AS to call for page
> 4. It works great. I would now like to have a text box
come up on the rollover.
> I tried to nest the mc into a button. I can make the
text box work but the
> script won?t work when I click.
> Could you refer me to a resource that would explain the
relationship between
> the two. Or is there another way to do this.
> So the text box says ?Click here for more Info?. Can?t
click to execute Action
> Script, I think it is not addressable because it?s
nested in the button.
> If I reverse the nesting then the text box in the over
frame won?t execute.
Sorry, a bit chaotic and i can't really get your arrangement.
Please upload what you have so far, we will go from there.
There is so many ways to achieve the same thing in flash that
there
is no point going into it, could turn up suggested solution
totally
does not suit your project. Need to see what you have so far.
Upload to your server and provide URL for us to check.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Having trouble adding new collection in ibooks?

Hi
I am having trouble a adding a new collection in ibooks. When I click on "+New Collection" it disappears and the keyboard does not pop up and then seems to freeze. It was working fine yesterday and only encountered this problem this morning.
Has anyone else had this problem or know how I go about fixing it?
Thank you!

The problem is not thru TWC... I can access my account in Outlook and also by Webmail.
The problem is on the Iphone 4 (I had no problem on my 3G). Like I said, the settings I have entered are the same as the settings for the other 4 accounts. The only portion of the setup that I cannot access during the "failed" setup is the "Advanced" where I can turn SSL off and confirm password authentication.

Error in action script and button

I have a page that i have designed for practice. i have three
buttons on each page and have been tring to get them to link to the
proper page/frame. For instance the button for ABOUT US should link
to the second page/frame. The code i am using is as follows.
on (release) {gotoAndStop(2);
This should have it go to page/frame 2 and stop but when i
test it it gives me this error.
Scene 1, Layer 'about', Frame 1, ... 1087: Syntax error:
extra characters fou... on (release) {gotoAndStop(2);
I am using action script 1.0 & 2.0. I am not sure what to
do.

The way that this function is written, on (release), it
should be
directly attached to a button or movieClip instance. However,
the
gotoAndStop(2) command is telling the button or clip to go to
frame 2,
not the main timeline. If you change that line to
_parent.gotoAndStop(2), you'll get the playback head on the
main
timeline to move, not the playback head in that button or
clip.
A far better method is to assign instance names to each
button or
movieClip that you want to react to actionscript. Then you
can write the
function(s) for those instance names. You would write the
actionscript
to a frame instead of directly on the button or clip. This
makes the
actionscript much easier to find when you need to edit.
So, for instance, you could then write a set of functions to
move the
playback head. Something like this:
// we'll assume that the buttons are named button1, button2,
button3
button1.onRelease = function() {
gotoAndStop(X);
button2.onRelease = function() {
gotoAndStop(Y);
button3.onRelease = function() {
gotoAndStop(Z);
// where X,Y and Z are the frame numbers that you want to
move to
// you don't need an explicit reference for the timeline for
the
playback head to use here. The code and the objects are all
on the same
timeline.

Having trouble adding action script to button symbol

Similar Messages

Maybe you are looking for