Having trouble burning discs, sometimes error 4280 comes up, anyone know?

Having trouble burning discs, sometimes error 4280 comes up, anyone know?
sometimes it will say checking media, then it will do nothing!

Look around for more posts about this. There are TONS. I'm guessing you have upgraded to the newest Itunes. Which apparently makes you CD burning fail! Itunes needs to fix this problem but so far they haven't. I think there are little things that you can do to maybe fix it but I'm not sure so look around for other posts about this same kind of thing, anything along the lines of CD's not burning and error 4280. I wasted 5 CD's trying to get past this error thinking it was my CD's fault.

Similar Messages

I am having trouble connecting to wifi on my acer. Anyone know how to connect to wirless?

I have tried everything to connect my acer to a wirless network. Does anyone know how to connect to a wirless network?

Did you already try to reset the router?
Did you reset the iPod by holding the sleep and home button until the Apple logo comes back again?
Did you reset the network settings on your iPod in Settings/General/Reset?
More tips here: iOS: Troubleshooting Wi-Fi networks and connections

I am having trouble burning discs! HELP!

Ok I was able to burn playlists to discs about a month ago. Now yesterday I was trying to burn a playlist to a disc and i got an unknown error (4000). What do I do so that I can burn playlists to a disc again!
4th generation Windows XP

Unfortunately there doesn't seem to be an easy answer to this error 4000, and "upgrading" to iTunes 4.9 when we are currently at version 6.01.(3) is a retrograde step.
If you go to the Importing and Burning section of the iTunes for Windows forum and type "error 4000" in the search field, you are going to see a lot of posts about this.
Check some of them out, and you may find some useful info.

Having trouble burning a dvd - error message.

I recently bought a 2009 macbook on ebay, and when I tried to burn a dvd, it didn't work and would scratch up my discs. I informed the person I bought it from, and they were nice enough to replace the drive. I just got it back in the mail and have been trying to burn dvds, but I keep getting an error message when using Toast version 10 and also trying on Toast 8 that says:
The Drive reported an error;
Sense Key = Medium Error
Sense Code = 0x02
NO SEEK COMPLETE
It will start burning on and then when writing the lead out on toast 10, it gives me an error, and that was the error message I caught when I tried to burn using toast 8. With toast 8 it barely started before that message came up. I have been trying with Sony DVD-R discs that I am able to use on my mom's iMac from 2008. I'm confused; should I try a different kind of disc?

Welcome to discussions.
Be certain to use good DVD media.
You may want to try using Verbatim or Maxell DVD-R 4X.
Also, save the project as a disk image and burn it as slowly as possible with either the disk utility or Toast™.
Sue

Having trouble burning images to cd, get error code 0x8002006E - what is it?

Hello all, I am having trouble burning images to a cd, I get error code 0x8002006E - what is it? I have an older MacBook Pro, OSX 10.6.8. Help!

You might also try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
And you might try deleting the "com.apple.finder.plist" in your Library.
Ciao.

Hello I am having trouble burning cds keep getting error mes. 4450 ? Help!

Hello, I am having trouble burning CDs from itunes keep getting error message 4450? Help

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I'm having problems burning discs,whether it is photos or music i keep getting error messages,i have been using the same brand for years and have faith in them and this problem has only started since I got a new hard drive installed,any thoughts ? thanks

at the moment i have had a disc in for at least 20 mins and it's still 'finishing' sems a bit long for 17 songs . also the fan is on almost all of the time , maybe that has a bearing .. ? I'd appreciate some help here as it is getting increasingly frustrating . alao when i put in the discs that i have used they do not register on the desktop . so i have been wasting lots of discs doing this .
Thank you all .

What brand of media are you using?
What error messages are you getting?
What application/s are you using to burn?
iDVD: Troubleshooting issues with burning discs
http://support.apple.com/kb/HT1583
Mac OS X: "Unknown Error -2147352480" when burning CD-R, CD-RW, or DVD-R media
http://support.apple.com/kb/HT2718

When I go to burn a CD I have it in a playlist and hit burn to disc a error message comes up and says disc burner or software not found

When I go to burn a CD I have it in a playlist and hit burn to disc a error message comes up and says disc burner or software not found. How do I fix this for Windows vista.

Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Gateway M-2626U
iTunes 10.2.2.14
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 003DAE0803978170
Current user is not an administrator.
The current local date and time is 2011-06-07 21:32:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 3200 Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.2.2.14 (x64) is currently running.
iTunesHelper 10.2.2.14 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.

I have been having trouble burning a DVD.

I have been having trouble burning a DVD. It goes through all the steps until it gets to the multiplexing "burn" step and then with 3 minutes left the disk pops out. The disk is left empty and an error comes up. I have been able to burn DVD's before, so this is frustrating.

Well - not correct answer as I understands it - This is a very complex question. In my case I'de put a button just touching the TV-Safe area boarder. Moving it a minute inside and the Error disappeared.
BUT - there are so many other things that I collected a long long list on this - read and see if You find help here.
Multiplexing Error
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
Chapters !
A. Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9 strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutly needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
*One user more writes*
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous trys, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no mulitplex error
As a final experiment, I moved "bad" chapter mark about 5-10 secs beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplexer Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Yours Bengt W

I am having trouble burning a disk of my project what should I do?

I am having trouble burning a disk of my project what should I do?

Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html
Set your DVD output to a folder on your hard drive and then use the FREE Imgburn to write the folder to DVD (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons

Burned CD yesterday, can not burn today. Error 4280 - Windows Vista

Yesterday, I bought a number of tracks and albums from the iTunes store. Before I purchased them, I created a test CD with some tracks I already ripped from CDs I own. I burned this CD through iTunes. All seemed well.
I bought my music. After, I also backed up my purchases using iTunes. Still, all seemed well.
Today, I tried to create audio CD with the tracks I purchased from the iTunes store. It did not work.
It seems that the error (4280) comes up a lot, but in relation to Sony drives. My drive is not made by Sony.
Anyone have any ideas on how to solve this?
Diagnostics:
Microsoft Windows Vista Home Edition Service Pack 1 (Build 6001)
GBT_ GBTUACPI
iTunes 8.0.1.11
QuickTime 7.5.5
FairPlay 1.0.15
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.1.13
Bonjour 1.0.5.11
iTunes Serial Number B7AD5D81210AD3E3
Current user is not an administrator.
The current local date and time is 2008-10-14 09:50:15.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 7600 GT
** External Plug-ins Information **
No external plug-ins installed.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.0.7.5),
G: LITE-ON DVDRW SHW-160P6S, Rev PS0A
Audio CD in drive.
Found 25 songs on CD, playing time 52:14 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 00:21:59
Track 3, start time 01:15:10
Track 4, start time 02:07:35
Track 5, start time 03:09:32
Track 6, start time 06:00:56
Track 7, start time 07:42:21
Track 8, start time 08:59:27
Track 9, start time 11:53:25
Track 10, start time 12:16:55
Track 11, start time 14:15:44
Track 12, start time 20:17:12
Track 13, start time 23:44:05
Track 14, start time 25:45:70
Track 15, start time 26:08:02
Track 16, start time 26:30:32
Track 17, start time 31:00:10
Track 18, start time 31:57:05
Track 19, start time 37:03:25
Track 20, start time 39:36:13
Track 21, start time 40:39:48
Track 22, start time 42:51:45
Track 23, start time 46:11:23
Track 24, start time 47:28:63
Track 25, start time 50:57:25
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 12 16 24 32 40 48.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive G: LITE-ON DVDRW SHW-160P6S on CDR media at speed 8X.

Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
what has been working for folks with the 2380s on 64-bit systems (it can hit XP too) has been reinstalling the 64-bit version of the GEAR drivers that iTunes uses for burning and importing.
GEAR drivers are available from the following page. (note that there are two different 64-bit versions. be sure to get the one that matches your hardware.)
GEAR drivers

HT1338 I'm having trouble burning my photos from i photo what should i do

im having trouble burning my photis it tells me there is an errors in the writing

There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.

I am having trouble burning a gapless album that is a mixed compilation. I have selected part of compilation album on the options tab and I did select gap between songs as zero. When I play the cd, it is sticking between songs? Please help!

I am having trouble burning a gapless album that is a mixed compilation. I have selected part of compilation album on the options tab and I did select gap between songs as zero. When I play the cd back after burning, it is sticking between songs? Please help!

sheldz46 wrote:
Thanks Chris but according to Pioneer, is was possible with the itunes in 2010.
It wasn't. (at least as far as setting Part of Gapless album goes. See next para.)
They claim that itunes will work if you select gapless album, part of a compilation
Selecting Gapless album does not make it gapless. (which is likely that now this option is removed - to not confuse people)
The ONLY thing that option did was tell iTunes to NOT crossfade consecutive songs from same gapless album IF you had crossfade enabled.
-> http://support.apple.com/kb/ht1797
Setting the gap to 0 is what made it "seem" gapless.
Perhaps it is not working as it used to.
Try a slower burn speed.
and used itunes to convert them to mp3
Dont know why they suggest this.
Simply use the WAV file. Then there will be no loss (as there is when converted to MP3).

I'm having trouble updating Creative Cloud (Error Code: U44M1P7). Any ideas?

I'm having trouble updating Creative Cloud (Error Code: U44M1P7). Any ideas?

U44M1P7 - Updates : http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
U44M1P7, U44M2P7 - Creative Cloud Help / Can't apply Extension Manager update 6.0.2 | Mac OS : http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html

Having trouble updating Creative Cloud (Error Code: 85)

Having trouble updating Creative Cloud (Error Code: 85)
Installation keeps stopping at 43%

Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Having trouble burning discs, sometimes error 4280 comes up, anyone know?

Similar Messages

Maybe you are looking for