Having trouble burning DVD-R DL... can you help?

Hello, again, folks.
People have been so nice to me here since I got my new MacBook Pro (late 2011) and am now running Lion (something I couldn't do with my old MacBook Pro (early 2006). So here's a new problem and I hope there will be some kind folks who will help me with a solution.
Since 2002 I have been burning back-ups of all sorts of files to DVD. Sometimes I just use the Finder, sometimes I have used Toast.
I am currently using both the Finder burn and Toast Titanium 11.05 to try to burn data disks using DVD-R DL disks. I've only tried four thus far but each time the back-up has failed: twice using the Finder and twice using TT. TT will burn to 99% and then just stop. The Finder method will seem to be chugging along fine but, by the end of the burn, it will present me with an error message (and I number - which I have not written down: if that error # will help, I'll 'waste' another disk to get it).
I'm wondering if it's a hardware, software or media issue. I have used both Memorex and Verbatim disks, so I don't know if it's the media or not.
Can anyone point me in the right direction? I don't mind which method I use (although I really prefer Toast for some reason - maybe because I paid so much for it), I just want to be able to back-up my data as I've been doing for the past ten years.
Thanks in advance,
Clinton

Got here from your link Clinton!
Sig makes an important point. There is no guarantee that the brand of media favoured by one DVD burner will be equally succesfull in another.
If you have the only one on the planet that likes Memorex, then stick with it!
For the rest of us there are the brands mentioned in your other thread!

Similar Messages

HT4061 hi,i,m having trouble charging my iphone 5 can you help me please

hi,i,m having trouble charging my iphone 5.it got down to 17% before i realised it but it would not charge from my wall plug and cable.i,m now using the cable direct from the phone to my pc.i,ve read this is a common fault but i need it fixed can anyone help please

If the iPhone still has Warranty or AppleCare, then it will be covered at Apple. If no coverge, time to buy new charger if you think you need one, as the PC seems to work for you.

I am having trouble activating my iPhone 4 could you help me?

I am having trouble activating my iPhone 4 could you help me?

Yes. AT&T has to authorize the unlock. However, they can not do so in the store. There is a process that must be followed involving restoring the phone in iTunes to complete the unlock process. How did you use the phone in between the time you bought it and the time AT&T authorized unlocking it?
WHEN did AT&T authorize unlocking it? AT&T did not begin offering unlocking until last Spring if I recall correctly.

My macbook is flashing saying "insert blank disc..." when disc is in computer to burn a cd. Can you help?

my macbook is flashing saying "insert blank disc..." when disc is in computer to burn a cd. Can you help?

Bummer. Could be a problem with the MBP drive. Are you using Re-writable discs maybe?
Check the discs work in your HP machine. They may have burnt but not successfully. Your HP machine may not be able to open them either.
Have you considered using a USB flash device to transfer the photos, or just copy them over your home network? CD is a slow an cumbersome method.

Having trouble installing adobe... can any help..I have a macbook pro

Having trouble installing adobe on my macbook pro, can anybody help ???

You may be able to load the OS from your other MBP disks, if they are the same modal MBP...
You could also do a clone of your other MBP to the blank one, use Carbon Copy Coner and a FireWire cable.

Having trouble with DVD Video files. Please Help! :)

Hi I recently got a film DVD I wanted to take a clip off. However although I can watch the section I want in Windows Media Player, when I import the film into Premiere - some of it is missing! there are 4 files '4-1',4-2','4-3',4-4' which make up the movie. I can load them all in but 4-3 is missing the last 15-20 minutes, even though I know its there - cos this file is the same size as the previous one which is full length. Does anyone know why this would be? The DVD is unencrypted.
Please help - its quite annoying that the small section of film I want is the bit that won't appear! Thank you very much
Rich

Based on this one line:
The DVD is unencrypted.
I was assuming that it was not protected. However, as you point out, some aspects might be, and the OP might not be completely aware of this.
If there is protection, I strongly urge anyone to respect that, regardless of their intended use of the material. Copy protection is there for a very good reason. Regardless of what one might be able to do, they should be 100% ethical, and honor any/all copy protection. This is true for material from a videographer, or from a commercial studio. Should you need to use the material in such a DVD-Video, you should contact the author to get first permission, and then the original source material, that has not undergone the MPEG-2 compression to DVD-Video.
Again, I assume that the OP knows that this is NOT an issue, and will not figure into the problem. In that case, all above does NOT apply in this case, but some other reader might make note of it.
Good luck,
Hunt

Having trouble burning DVD

I recently finished my first iDVD project since I got my new iMac 3 weeks ago. It seems to burn correctly and the burnt DVD is ejected but iDVD hangs open. It seems that its not finishing the "clean up" portion of the burn process. I have had to force quit it the last three times ive burned the DVD. Seemed okay at first but the DVD it creates is faulty. I have two different kinds of DVD. +R and -R and have three different types of players. Ive tried a combination of all of them and the DVD created will hang at some points on the program and then become unreadable. Any sugestions will be appriciated

Hi dashtech:
Welcome to discussions.
Do what iDVD Guru Len Goff does (I quote him here):
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
Sue

Trouble burning dvd...message: playback may be disabled

i'm having trouble burning dvd through - share - then checking blue ray box and burning it as AVCHD. i've done it before by following these same steps but this time the dvd player gives me the the playback mabe be disabled message, any suggestions...

no, i'm not trying to burn a blue-ray disc, it's just a box in a burn window that you check even when you're burning regular dvd, so it'll come out as avchd. anyway for some reason i can't get it to work.

I have been having trouble burning a DVD.

I have been having trouble burning a DVD. It goes through all the steps until it gets to the multiplexing "burn" step and then with 3 minutes left the disk pops out. The disk is left empty and an error comes up. I have been able to burn DVD's before, so this is frustrating.

Well - not correct answer as I understands it - This is a very complex question. In my case I'de put a button just touching the TV-Safe area boarder. Moving it a minute inside and the Error disappeared.
BUT - there are so many other things that I collected a long long list on this - read and see if You find help here.
Multiplexing Error
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
Chapters !
A. Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9 strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutly needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
*One user more writes*
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous trys, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no mulitplex error
As a final experiment, I moved "bad" chapter mark about 5-10 secs beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplexer Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Yours Bengt W

I was having problems burning DVDs' fro iDVD and it turned out my burner is at fault I have a 27 inch iMac using a OPTIARC DVD RW AD-5680H. Where can I buy a replacement in UK?

I was having problems burning DVDs' from iDVD and it turned out my burner is at fault.
I have a 27 inch iMac using a OPTIARC DVD RW AD-5680H. Where can I buy a replacement in UK? I have seen these with SATA is this the correct cable for my mac?
I have also tried the Mac superdrive but my imac wont recognise it as it's been configured for macbook air and mini mac. I know I can "make" it work by doing something or other in com.apple/plist, but dont want to mess about in there.
I'm also told an external drive would work but does "mac compatible" mean only for air and mini as their own superdrive is or all macs?
Any help appreciated before I convince myself mac is no better than windows pc!

Thanks but this didn't really help.
I can buy the drives at a dozen places but none of them seem to know what connection is correct (SATA etc) and that includes the apple store. It was the store who told me buy the superdrive and all my problems would be over. Wrong! It isn't recognised by imac as it's confifured for air and mini mac. Only way to make it work is as i said in earlier post. (Would you be happy buying a car you were told would start and then discover you have to open the bottome and fiddle to make it go?)
The apple store I would not even consider taking it to. Days without the pc, over priced and don't have a good reputation for actually fixing things!
But thanks

I have an '09 15" mac book pro running os x mavericks and I'm having trouble burning a dvd.

I have an '09 15" mac book pro running os x mavericks and I'm having trouble burning a dvd. In iMovie, I sent my movie to file and then to iDVD to burn a copy. It was saved in Documents. When I went to iDVD, the thumbnail image of the movie to be burned was faded and inoperable. What's going on now?

Did you export the movie out of iMovie as 480p? Next just drag the movie from the Documents folder into the iDVD menu window being careful to avoid any drop zones.
Lastly follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Hello everyone! I'm having a trouble... I need to download Adobe Illustrator for windows 8, but i'm not able for doing that. Can you help me Please?

Hello everyone! I'm having a trouble... I need to download Adobe Illustrator for windows 8, but i'm not able for doing that. Can you help me Please?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

TS1368 hi i am having trouble with connectind to the i tune app it says unable to connect and when i try to make a payment it says cntact i tune although i have money on my account, and i have checked my wi fi please can you help, THANK YOU

I am having trouble useing i tune, when i try to connect it says ubable to connect, and when i try to pay for something it says please contact i tunes, i have checked my wi fi, and i have money in my account, can you help, thank you

These are user-to-user forums, you can contact iTunes support via this page and ask them why the message is appearing : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

HT5569 I am having trouble connecting to wifi can you help.

I am having trouble connecting to wifi can you help.

connectng with a pin # will not work with the ipad. you need to find out exactly what the actual wifi password is.
pin and push buttons are used by wifi protected setup. which is an optional feture of WPA
here are some ideas
go to the routers home page (typically 192.168.1.1 or 192.168.1.254) and see if you can click on "show password"
get the manual out, it should have the default user name and password you may need to access the routers page
if your windows computer connects, then you should be able to right click the wifi connection and click on show password as well. this is somewhere in the properties page of the wifi connection
also with windows its a good idea to click on "save wifi connection to usb drive" this can be used to connect other windows computers and xbox game consoles as well
if your laptop computer is a mac book you can go to the keychain or icloud keycahin and reveal the actual passowrd as well.
look at the actual router it might have directions on a sticker on how to access the routers configuration pages
if you enter the wrong password on the ipad you need to forget the network and try again

HT204053 I would like to create a new icloud email address but I'm having trouble doing that. Can you help me?

I would like to create a new icloud email but I'm having trouble doing that. Can you help me?

I have account but need a second one and for the life of me cannot remember how to do it....

Having trouble burning DVD-R DL... can you help?

Similar Messages

Maybe you are looking for