Having trouble burning my iPhone videos to DVD

I have a bunch of videos that I have taken wih my iPhone 4S. I put them on my hp laptop and they play just fine when you want to watch them on the computer. When I tried to burn them to a DVD to play on my TV, the DVD player said NO Data. When I tried to play the DVD in my computer, the video started, but it was very jumpy and didn't play right. I tried to burn the DVD at 8X and 3X speed and neither worked. Anyone have any thoughts?

Can your videos play in iTunes correctly? If yes, you can use a program to convert your videos to the DVD format, then use the iDVD to burn them to a DVD. use mpeg streamclip to convert the movie file to mp4, then burn to dvd, thats a cheap and easy way to do it, not much loss of quality, no ones expecting avatar sequences to be going on, but keep the original files on a HDD and maybe when you have video editing software you can do something nice and proper.
I remember that Apple iDVD software can burn video to a DVD on Mac, but before that you need to transfer iPhone 4S video to your computer with iPhone transfer for Mac. After that, open the iDVD and directly import your video from iPhone 4S to iDVD for burning.

Similar Messages

I have been having trouble burning a DVD.

I have been having trouble burning a DVD. It goes through all the steps until it gets to the multiplexing "burn" step and then with 3 minutes left the disk pops out. The disk is left empty and an error comes up. I have been able to burn DVD's before, so this is frustrating.

Well - not correct answer as I understands it - This is a very complex question. In my case I'de put a button just touching the TV-Safe area boarder. Moving it a minute inside and the Error disappeared.
BUT - there are so many other things that I collected a long long list on this - read and see if You find help here.
Multiplexing Error
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
Chapters !
A. Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9 strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutly needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
*One user more writes*
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous trys, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no mulitplex error
As a final experiment, I moved "bad" chapter mark about 5-10 secs beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplexer Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Yours Bengt W

I have an '09 15" mac book pro running os x mavericks and I'm having trouble burning a dvd.

I have an '09 15" mac book pro running os x mavericks and I'm having trouble burning a dvd. In iMovie, I sent my movie to file and then to iDVD to burn a copy. It was saved in Documents. When I went to iDVD, the thumbnail image of the movie to be burned was faded and inoperable. What's going on now?

Did you export the movie out of iMovie as 480p? Next just drag the movie from the Documents folder into the iDVD menu window being careful to avoid any drop zones.
Lastly follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

I am having trouble burning a disk of my project what should I do?

I am having trouble burning a disk of my project what should I do?

Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html
Set your DVD output to a folder on your hard drive and then use the FREE Imgburn to write the folder to DVD (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons

I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. right now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service" any ideas on what i shud do?

I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. initially itunes would let me go so far as downloadin the new software then an error poped up as soon as the download finished, and now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service, reconnect or try again later" any ideas on what i shud do?

Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore

I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords

I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .

Connect the device to iTunes and restore from the most current backup.
If the issue continues, restore as new.

I'm having trouble connecting my iphone to my itunes on my computer

So for christmas I got an iPhone and currently, I'm having trouble connecting my iPhone to my iTunes on my computer. If I get on my computer and open my iTunes, I can use it perfectly fine but once I tried to connect my phone to it, it told me the software needed to be updated before it would work with my phone. I went to the website and tried downloading the updated version 10 times but every time it told me it couldn't connect with an apple device or something. So then I tried just going to my downloads and stuff and moving the actual song straight to my phone but it would always tell me my device has ended or has been disconnected. All I'm trying to do is move some songs onto my phone from my computer. They weren't purchased straight from iTunes so it's not showung up in my "purchased" on my phone. (I think I got them from amazon and some are cds that I my computer that I got years ago. Maybe thats why they don't show up in the purchased?) Anyway, how can I fix this? I have a windows computer if that can help at all. Thanks!!!

Also, I just opened my iTunes on my computer then plugged my phone to the computer and a box popped up saying "This iPhone cannot be used because the Apple Mobile Device is not started"
I have no idea what that means.
I don't have that option on the side that says what device is connected so I can't sync or anything.

If you mean you are having trouble activating your iPhone after updating to iOS 6: iOS 6.0.1 Generally this is a sign that the iPhone had previously been hacked/modified/jailbroken and the update relocked it to the original wireless carrier. If this

If you mean you are having trouble activating your iPhone after
updating to iOS 6:
iOS 6.0.1
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
My phone is from USA and unlocked version and I paid 750 USD.
Where did you acquire this iPhone?
USA
What wireless carrier did you use before this problem?
I used BSNL - India previously. After I get problem, I used Mobily -Saudi Arabia again I got problem and I am trying to use Airtel - India.
Does the app Cydia appear on your iPhone?
What does It mean?
What does it say when you look at Settings=>General=>About=>Carrier?
Airtel 13.0

It would be better for troubleshhoting if you posted back to your original question.... here

Sony just isn't helping me. I'm still having trouble transferring my NX3 video files.

Well, I'm still having trouble transferring my NX3 video files to my editing software. Sony suggested using the Sony Content Browser but that doesn't work. Sony just can't seem to help me. If the scene shot on the card is longer than 10 minutes, 4 frames of audio is lost from each file. So if you shoot 60 minutes straight (say a wedding, you loose audio every 10 minutes) I guess this doesn't sound important, unless it happens just as the bride is saying "Yes" in her vows.
My original post is as follows:
Sony NXCAM (NX-3) drops audio tracks when importing into FCPX and Premiere.
I called Sony on Feb 13, 2015. I spoke with Doug (case no. 661972). I've been using my NX-3 for about 3 months. I'm still testing Sony NX-3. Looking for a way to transfer the video and audio without dropping audio frames. I didn't catch it at first, I mean it's only a few audio frames. It seems to happen with files over 12 minutes shooting. It seems that I can't upload the video/audio shot in my NX-3 to either my iMac (using FCPX nor Premiere) nor can I upload it to my PC (using Premiere) without 3 to 6 audio "frames" being dropped. When I spoke with Doug at Sony, a person I've actually spoke with in the past, he seemed frustrated. I was speaking with him as a professional and was attempting to find a solution, he was being protective and wanted to place blame at other companies. He stated that the camera played back the files correctly so it isn't a Sony problem. I explained that it is a problem for all of us if we choose Sony as our purchase. He told me "you should all buy Canons next time." That kind of through me. How do you speak to that. I explained that I am just looking for a solution and he told me to call the software and computer companies. Doesn't Sony realize that just because the camera works, that isn't the end of the road. You need to put the video into a devise to edit the video. I asked him what software would he recommend to a professional to use to edit footage taken by the Sony, he no reply. All I received from Doug was a really bad feeling about Sony. I've been a Sony "shooter" for over 34 years. I still can't believe the way I was treated. Not sure now what path I will take with this. But I surely need to tell everyone (all of my associates who have been asking me how I like my new camera) what response I received from Sony. Buy a Canon. By the way, I asked if Sony might have another camera of the same type that didn't drop audio. Doug didn't know. Really strange. Is Doug not happy with his prosition with Sony?

Auto Correct:
As far as I'm aware this cannot be turned off. Someone may prove me wrong on this point
CDDB Update:
Again, as far as I'm aware this cannot be done. You could use WMP to update the files then import them into iTunes.
Music Deletion:
iTunes seems to only ask you if you want to delete a file if the file is located in its library folder. In the Preferences>Advanced>General section try changing your iTunes Music Folder to the folder where all your music is stored and it should ask you if you want to move files to the recycle bin when you delete them.
Library Update:
This is a feature I with iTunes would introduce. When you delete or move a file iTunes loses track of it. What it needs to be able to do is first check to see that all the existing files in the library are still there, and remove the ones that aren’t, then it needs to search for new tracks.
It can search for new tracks but if you have renamed a file, then it will be in the library twice, one is the old file (which will no longer play because it doesn’t exist) and the other is the new file.
The way I now avoid iTunes annoyances in relation to file names and folder organisation is I let iTunes sort it all out for me. Selecting "Keep iTunes Music folder organised" and "Copy files to iTunes folder when adding to library" will get iTunes to sort your music into Artist folders, then within the Artist folders are Albums, then within the album folders are the actual files, which are named Track Number Artist. For example Coldplay - Clocks will be named 05 Clocks.mp3.
WARNING: Selecting "Keep iTunes Music folder organised" will copy all the music in your library to the iTunes Music folder. You must have enough Hard Disk space to do this.
...that wound up longer then I thought it would. Hope you can make sense of it all.
Cheers,
Ben

Having trouble burning discs, sometimes error 4280 comes up, anyone know?

Having trouble burning discs, sometimes error 4280 comes up, anyone know?
sometimes it will say checking media, then it will do nothing!

Look around for more posts about this. There are TONS. I'm guessing you have upgraded to the newest Itunes. Which apparently makes you CD burning fail! Itunes needs to fix this problem but so far they haven't. I think there are little things that you can do to maybe fix it but I'm not sure so look around for other posts about this same kind of thing, anything along the lines of CD's not burning and error 4280. I wasted 5 CD's trying to get past this error thinking it was my CD's fault.

Hello I am having trouble burning cds keep getting error mes. 4450 ? Help!

Hello, I am having trouble burning CDs from itunes keep getting error message 4450? Help

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

TS4062 I am having trouble syncing my iphone to my computer when I plug in the usb and click on the devices button sync is not highlighted

I am having trouble getting my iphone synced with my computer. I have tried both wifi and with a usb the sync tab under devices is not highlighted and can not be clicked.

Is this the same computer/library the device has always synced with? Was the computer recently reloaded?

HT1338 I'm having trouble burning my photos from i photo what should i do

im having trouble burning my photis it tells me there is an errors in the writing

There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.

HT4061 hi,i,m having trouble charging my iphone 5 can you help me please

hi,i,m having trouble charging my iphone 5.it got down to 17% before i realised it but it would not charge from my wall plug and cable.i,m now using the cable direct from the phone to my pc.i,ve read this is a common fault but i need it fixed can anyone help please

If the iPhone still has Warranty or AppleCare, then it will be covered at Apple. If no coverge, time to buy new charger if you think you need one, as the PC seems to work for you.

I am having trouble with my iphone, I updated it and when I turned on the screen the ituns and USB icon appear. I've tried to restore it but it sends me to the ituns icon right away and I dont know what to do.

I am having trouble with my iphone, I updated it and when I turned on the screen the ituns and USB icon appear. I've tried to restore it but it sends me to the ituns icon right away and I dont know what to do.

you may have to do these stepps a few times http://support.apple.com/kb/HT1808

Having trouble burning my iPhone videos to DVD

Similar Messages

Maybe you are looking for