Having trouble capturing

FCP 4.5 HD, Powerbook G4 10.4.9 firewire to DVCPRO deck... I can control deck and have made one capture but now after logging clip when i click capture clip the "log clip" window pops back up.
before this i was getting a message that the timecode was broke but i know its not.
also I'm not able to "capture now" it just goes to the beach ball and i have to force quit.

Hi:
Look at this Apple article:
http://docs.info.apple.com/article.html?artnum=305284
  Alberto

Similar Messages

  • FCE4 im having trouble capturing

    im having a lot of trouble capturing my footage from a miniDv using the firewire.
    my laptop isnt noticing the camera attached to it and therefore i cant capture anything.
    I know this is vague but i use this software at college but i have had nothing but trouble with it since i bought it.

    Please give your full system specifications, what computer, what drives, what camera or deck, how everything's connected, what settings are on the media, what settings you're using in Final Cut, and finally what version of the software, of the OS, and of QuickTime you are using.

  • FCE having trouble capturing

    When i am capturing a video off a tape via firewire. final cut always stops at the same spot stating "capture encoutered a problem reading the data on your source tape...." and so on. I have a samsung scd107. my firewire hard drive is connected to my computer and my camcorder is daisy chained to it. can you guys help me out? the camera isn't even recognized in imovie ...
    thanks.
    tyler

    iMovie and FCE have little in common and FCE uses QuickTime files that carry timecode. That's probably why iMovie seems to work.
    The FCE Easy Setup sounds OK.
    I suspect a tape problem because it is repeatable on the same spot. Whether the tape is physically damaged or it's simply non-contiguous timecode.
    Timecode is a bunch of numbers that look like this: 00:25:12:01. This example read from right to left says, frame 1, second 12, minute 25, 0 hours.
    The timecode counts like a clock and a break in it's continuos counting will upset capture.
    You can see the timecode displayed on the camera if in the correct menu setting. Refer to camera manual.
    Watch the footage on the camera to check if there is a break on that trouble spot. Maybe even lift the protective flap on the cassette housing to inspect for damage.
    BTW: If tape is recorded, erased and recorded again for more than three or four cycles problems can quickly creep in.
    Al

  • HAVING TROUBLE CAPTURING DVCAM

    For some reason everytime I capture to fcp from a sony dsr-pd150 I have captured with this camera before with no problem should I have any special setting with fcp to capture with this camera. thanks

    If you've captured with this setup before (you haven't made any changes to your system - software updates, additional plugins, applications added?) I'd recommend repairing permissions, trashing the FCP preferences and checking you've got the appropriate easy set-up. You could also try resetting the firewire ports by unplugging from power supply for 30 or so mins (removing battery if it's a laptop) after unplugging any devices and shutting down the 'puter.
    As Zak says, more info helps to diagnose the problem

  • Having trouble capturing 23.98 without duplicate frames and interlacing

    the footage was shot at 23.98 and is being captured at 29.97 with the advanced pull down removal and I'm able to clean takes with short clips being imported but not when a longer clip is being captured
    has anyone had this problem before and do you have a solution
    im capturing with a JVC BR-DV3000

    Probably because you broke the cadence when shooting.
    Your only solution is to capture the shorter clips.
    Next time you shoot (or tell your shooter) never turn the camera off when it is recording, never preview your shot material, and never switch modes while the camera has the same tape in it.
    CaptM

  • Trouble capturing on final cut express hd and imovie

    I am having trouble capturing media in fc express as well as imovie. my footage is HD. when I start to capture the media goes in normal for like 2 seconds, then it says that the capture is 95% behind(in fc express) or that it is capturing at 1/8 speed (imovie). even when i stop the capture in order to let it catch up to real time,the media freezes up so that i cant really view it. i dnt know what i am missing.Ive even tried to use a different firewire cable. any suggestions?
    Message was edited by: sscstudios
    Message was edited by: sscstudios

    Thanks for the reply Tom. (BTW I'm not the original poster.)
    You are correct- It is a USB drive formatted FAT 32 . After my original post, I erased the drive and started over with a clean slate. This was successful for tape one (about 60 minutes). About twenty minutes into tape two though, it was deja vu all over again. FC froze, I force quit, and lost all of what I had captured from tape one in the process. I unsuccessfully tried to recapture tape one. Same problem again.
    Although this is the first time I've tried to capture through FC onto an external drive, I've got three other USB drives full of video I've captured from VHS with the same computer through a DV encoder. When you say USB is not supported by Apple for video applications, does that mean video editing applications? As for complete information, apologies but I'm not exactly sure what other info. you mean. Please let me know. Thanks again. I appreciate the time.

  • Trouble capturing HD media ...

    I am having trouble capturing HD media from my Sony HVR-Z1E! Three months previous I had captured 18 hours of HD media with no problems. Presently when trying to capture FCE engages the camera into play but the capture preview window remains black with the message “cueing tape”. The tape keeps playing but nothing else happens.
    Any ideas?
    G4   Mac OS X (10.4.5)  

    I've gotten this suggestion from a lot of different places, but it doesn't help me if I ever delete my captured footage and then need to reedit. If I go the "Capture Now" route will the program remember where the clips belong in my timeline or can I expect to have to start from scratch if I ever delete my footage (which is likely, since HDV takes up quite a bit of space)?
    Also any suggestions on how to avoid a non "I" frame? Sometimes all it takes is for me sitting there telling it to capture again and again before it finally sticks.

  • Importing photos from Iphone to computer and there is a message it is having trouble with this part way through on a phot and then stops

    I am having trouble importing photos onto my Mac book Pro from my Iphone...in the middle of the import I get a message stating that they are having trouble with one of my photos and then stops importing...want to save photos and clear the phone storage

    Hello cindysc
    Try importing the photos using Image Capture and see if that changes things. If it still gets stuck, try and email the photo to your self and download it that way.
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/ts3195
    Regards,
    -Norm G.

  • Having trouble downloading from my sony hdd camcorder to my mac

    I am having trouble transfering/downloading videos from my Sony HDD DCR-SR40 camcorder to my Macbook Pro,How do I get them to transfer?

    I am having trouble transfering/downloading videos from my Sony HDD DCR-SR40 camcorder to my Macbook Pro,How do I get them to transfer?
    Since you did not indicate the nature of your problems, I can only make a couple of generalized comments. 1) Most people import/capture DCR-SR40/60/80 "muxed" MPEG-2 content using iMovie ('08, '09, or '11). This workflow converts the files to QT edit-compatible formats (all I-frame M2V video with PCM audio) that is compatible with both QT 7 and QT X applications. 2) If you are already trying to use this workflow and are having problems getting the iMovie application to recognize the media/camcorder, recommend you change the order of connecting camcorder, powering-up camcorder, and booting the iMovie app.

  • Trouble capturing just audio from beta tapes

    Hello, I am trying to capture some audio-only beta tapes and having trouble. The deck is all hooked up correctly (deck to IO box to mac), and I followed the manual instructions on how to create an audio only capture setting. When I go to capture the audio, I can hear the audio playing and it says "now capturing", but when it stops I get an error saying "Final cut was unable to read the movie file just captured." Is anyone familiar with this kind of problem? Let me know if you need anymore information about my settings (unfortunately I am relatively new to final cut).
    Thanks,
    Mike

    Try this (no guarantees but it used to work): Go into your scratch disk settings and enable "capture video and audio to separate files." Wasn't consistently a problem, but when it was, this solved it. But I used to get the error when tried to initiate the audio only capture. Be sure and turn this off before you capture video and audio.
    Also, what happens if you try and capture video and audio of the same section? You can always just export the audio and then delete the capture.

  • Trouble Capturing Buddy Picture

    I'm having trouble using iChat to capture a buddy picture on my 24" iMac.
    I click on my existing photo, choose "Edit Picture...", press the camera icon, pose, watch the countdown and the photo flash, but no picture materializes.
    Any thoughts?
    Mark

    Hi,
    If you click on your Own Video icon do you get a Preview ?
    If you go to the iChat Menu > Preferences > Video/Audio Section can you see your preview ?
    With the first of these can you use the Video Menu "Take Snapshot" option ?
    This should end up on the Desktop (Video Snapshot.jpeg) (it maybe numbered if you do several)
    Also check in your Home Folder/Library/Images/iChat Recent Pictures (this is where they are supposed to be put from the method you are using).
    Using your Start Method can you actually chose a pic that already exists from somewhere else on your Hard Drive ?
    (You can not look in the iPhoto library by this method so it will have to be a loose pic).
    EDIT:- Please note my Time zone and personal Post time as I may not get back tonight (my time) to a further reply.
    10:09 PM Tuesday; February 10, 2009
    Message was edited by: Ralph Johns (UK)

  • Hi, I am having trouble MacBook Air crashing since Yosemite upgrade. I ran an Etresoft check but I don't know what it means... my system runs slowly and crashes. I have to force shutdown. Sometimes screen is black for a split second b/w webmail pages

    Hello,
    I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM  details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
    Thanks ever so much for your advice!
    Lillibet
    EtreCheck version: 2.2 (132)
    Report generated 5/2/15, 9:53 PM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Air (13-inch, Mid 2012) (Technical Specifications)
        MacBook Air - model: MacBookAir5,2
        1 1.8 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Not upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en0: 802.11 a/b/g/n
        Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 0:22:41
    Disk Information: ℹ️
        APPLE SSD SM256E disk0 : (251 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 250.14 GB Online
    USB Information: ℹ️
        Apple, Inc. Keyboard Hub
            Mitsumi Electric Apple Optical USB Mouse
            Apple Inc. Apple Keyboard
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Internal Memory Card Reader
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/WD +TURBO Installer.app
        [not loaded]    com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
        [not loaded]    com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
        [not loaded]    com.wdc.driver.USB-64HP (1.0.3) [Click for support]
        [not loaded]    com.wdc.driver.USBHP (1.0.14) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
        [loaded]    com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.mtrecorder.plist
    Launch Agents: ℹ️
        [running]    com.mcafee.menulet.plist [Click for support]
        [running]    com.mcafee.reporter.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [failed]    com.apple.spirecorder.plist
        [running]    com.mcafee.ssm.Eupdate.plist [Click for support]
        [running]    com.mcafee.ssm.ScanManager.plist [Click for support]
        [running]    com.mcafee.virusscan.fmpd.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        EvernoteHelper    Application  (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
        TouchP-150M    Application  (/Applications/Canon P-150M/TouchP-150M.app)
        iPhoto    Application  (/Applications/iPhoto.app)
        WDDriveUtilityHelper    Application  (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
        WDSecurityHelper    Application  (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        JavaAppletPlugin: Version: Java 8 Update 45 Check version
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        FUSE for OS X (OSXFUSE)  [Click for support]
        Java  [Click for support]
        MacFUSE  [Click for support]
        NTFS-3G  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
        Destinations:
            My Passport Edge for Mac [Local]
            Total size: 499.94 GB
            Total number of backups: 27
            Oldest backup: 2013-01-31 21:15:26 +0000
            Last backup: 2015-05-02 11:33:09 +0000
            Size of backup disk: Adequate
                Backup size 499.94 GB > (Disk used 82.42 GB X 3)
    Top Processes by CPU: ℹ️
             6%    WindowServer
             3%    fontd
             2%    VShieldScanManager
             0%    taskgated
             0%    notifyd
    Top Processes by Memory: ℹ️
        745 MB    Google Chrome Helper(8)
        439 MB    kernel_task
        246 MB    VShieldScanner(3)
        160 MB    Google Chrome
        127 MB    Finder
    Virtual Memory Information: ℹ️
        130 MB    Free RAM
        3.87 GB    Used RAM
        0 B    Swap Used
    Diagnostics Information: ℹ️
        May 2, 2015, 09:30:08 PM    Self test - passed
        May 2, 2015, 08:52:59 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
        May 2, 2015, 09:28:53 AM    /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
        May 1, 2015, 05:45:24 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
        May 1, 2015, 05:38:54 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
        May 1, 2015, 05:38:43 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
        May 1, 2015, 05:38:32 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
        May 1, 2015, 05:38:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
        May 1, 2015, 05:38:10 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
        May 1, 2015, 05:38:00 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
        May 1, 2015, 05:37:49 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
        May 1, 2015, 05:37:38 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
        May 1, 2015, 05:37:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
        May 1, 2015, 05:37:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
        May 1, 2015, 05:37:06 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
        May 1, 2015, 05:36:55 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
        May 1, 2015, 05:36:44 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
        May 1, 2015, 05:36:33 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
        May 1, 2015, 05:36:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
        May 1, 2015, 05:36:17 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
        May 1, 2015, 05:36:01 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
        May 1, 2015, 05:35:50 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
        May 1, 2015, 05:35:39 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
        May 1, 2015, 05:35:28 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
        May 1, 2015, 05:20:29 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
        May 1, 2015, 04:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
        May 1, 2015, 02:53:58 PM    /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
        Apr 20, 2015, 09:31:20 PM    /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • I am having trouble printing to an Epson XP600.  It is a new printer and it has been replaced because we thought it was the printer.  Basically, when I print from Excel, only color will print.

    I am having trouble printing to an Epson XP600.  We have replaced the printer and we are still having the same problem.  When I try to print from Excel, only the color prints.  Any suggestions?

    Has anyone else had issues not being able to print black (such as a document)?  My photos print great, but when I try to print a simple black-ink document, it won't work. Any suggestions?

  • Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hello Sue,
    I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
    I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
    It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
    Michael

  • I am having trouble installing Adobe Creative Cloud on my windows 7 laptop

    I am having trouble installing Adobe Creative Cloud on my Windows 7 laptop; i keep getting an error message
    this is what I get
    -- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------  ERROR: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi  ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi  ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

    http://helpx.adobe.com/creative-suite/kb/error-1603-fatal-error-occurred-1.html
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Mylenium

Maybe you are looking for