Having trouble connecting computer to TV with sound

I have a 2010 macbook pro and a samsung LN40B550 LCD HDTV - having trouble connecting computer to TV with sound - I'm not sure which connectors I need and have purchased a few that aren't working (HDMI: DVI cable & Mini - DP to DVI adaptor).  Any help would be greatly appreciated. Thanks

Sorry to tell you that DVI does not support sound.  You either have to use a HDMI cable (with the appropriate adapter) or tap your audio output port with a 'Y' type cable configuration for sound.
Ciao.

Similar Messages

  • I am having trouble connecting my iPad mini with my lap top that run Xperia

    I am having trouble connecting my iPad mini with my lap top that run Xp

    Hi..I've had a variant of this problem; my internet was accessible but my devices on wifi could not see the PC on Lan. That meant no iTunes syncing, Airplay from iTunes etc.
    Dlink has a strange default setting that isolates Wifi & Wired connections into different subnets.I'm assuming you have DHCP setup on your router and you're PC or MAC has internet access via the same router. Try the following steps to see if this solves the problem for you-
    1. Go to Setup -> Local Network  and Uncheck the box that says 'Configure the second IP Address and Subnet Mask for LAN' - Hit Apply
    2. Go to Wireless -> Wireless Basic and Uncheck 'Enable MultiAP Isolation' - Hit Apply
    3. Restart your Router
    Let me know if this solves your problem. I've been frustrated by my problem for months & had nearly given up.
    J

  • I'm having trouble connecting my Intel iMac with the internet using wifi router

    I'm having trouble configuring my iMac to accept a connection with my Telstra Elite mobile broadband Wifi router.
    The iMac's Wifi is turned on and the elite router is selected in the Wifi list with a tick.
    The router is turned on, and connected to the internet.
    I'm able to surf the net and collect emails using my MacBook Pro ( what I'm using now) and my iPad with no hassles by connecting them to the Telstra Elite Wifi router. But I'm unable as yet to get a connection using the iMac.
    The Telstra router accepts up to 5 simultaneous connections.
    At present the display on the router says that three devices are connected. They being the iPad, the MacBook Pro and the iMac.
    Can anyone help me out?
    Gregory

    hburgess3 wrote:
    I'm having trouble connecting my apple tv to the wifi on my campus. To connect to this wifi on a computer or iphone you have to install a program.
    Why?
    Contact the school IT department,

  • HT1277 I'm having trouble connecting my Exchange Server with my Apple Mail product.

    Per setting up the account, I'm getting email, so, I believe my Exchange IMAP is correct, but, I cannot send email to anyone outside my internal network.  The wierd thing is that when I go to the Connection Doctor (after I get the Try Again...or...Try Again with Selected Server screen), I get a green light on the SMTP Server and a red light on the Exchange IMAP Server.  Any comments would be appreciated. 

    Edgar,
    I highly recommend, if you live in an area where there may be overlapping WiFi networks..  use recent OS X's hidden WiFi Diagnostics utility......
    Hold down the Option key, click on the WiFi icon in the menu bar and click on Open WiFi Diagnostics... This works for (maybe 10.7... cant remember..) 10.8,10.9 and 10.10.
    ...and check for any nearby WiFis that may be on the same channel.... and if there are, change your WiFi channel to a different one so your signal remains clear  of interference and more importantly uninterrupted... LR seems very susceptible to such brief 'breaks' or interruptions...
    Personally because of where I live, there are no competing networks and I have no issues at all using LR with any of my 5 LP rigs here.. switching between them at will....
    The only other item of interest that I have found when troubleshooting such issues.. is the use of non Apple Routers..... and a failure of automatic port forwarding for example...but this cause usually prevents connection altogether and not intermittent issues... Haven't come across anyone using an Airport Extreme for example.. from 2009 onwards, who has any issues connecting LR to LPX... but a number of older Netgear, TP-Link and D-Links ones seems to have this issue at times...
    Cheers..
    Nigel

  • E1200 - Having trouble connecting to Dell Dimension XPS.

    Having trouble connecting Dell Dimension XPS with Windows XP to my new E1200 router. Any Ideas?
    It's connected via a wireless adapter
    Update: I have successfully connected to Vista computers but my XP will only connect as a guest. Seems like it doesn't want to take the network key or password

    What is the Service Pack on your windows, also, what is the security mode configured on E1200?
    To determine the Service Pack on your computer, click on the 'start' button and type in, 'winver' in the run window.
    Basically, if the security mode is WPA/WPA2 mixed mode or WPA2, then minimum requirement for Service pack is Service Pack 3.
    Else, if the Service pack is below version 3, then you need to lower down the security on E1200 to either 'WPA' or 'WEP'.
    Here is the link for changing the security level - http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&vw=1&articleid=22751
    If the Service Pack on your computer is version 3, then you can try these steps.
    A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
    1] Open the software and go to the option which says "Router Settings"
    2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
    3] Then go to the Wireless tab, change Channel width to 20 MHz only and change the Channel to 6, 9, 11..Save the settings.
    You can try adding the wireless network manually. Here is the link for the steps:
    http://ecross.mvps.org/howto/configwlan.htm

  • I'm having trouble connecting my iphone to my itunes on my computer

    So for christmas I got an iPhone and currently, I'm having trouble connecting my iPhone to my iTunes on my computer. If I get on my computer and open my iTunes, I can use it perfectly fine but once I tried to connect my phone to it, it told me the software needed to be updated before it would work with my phone. I went to the website and tried downloading the updated version 10 times but every time it told me it couldn't connect with an apple device or something. So then I tried just going to my downloads and stuff and moving the actual song straight to my phone but it would always tell me my device has ended or has been disconnected. All I'm trying to do is move some songs onto my phone from my computer. They weren't purchased straight from iTunes so it's not showung up in my "purchased" on my phone. (I think I got them from amazon and some are cds that I my computer that I got years ago. Maybe thats why they don't show up in the purchased?) Anyway, how can I fix this? I have a windows computer if that can help at all. Thanks!!!

    Also, I just opened my iTunes on my computer then plugged my phone to the computer and a box popped up saying "This iPhone cannot be used because the Apple Mobile Device is not started"
    I have no idea what that means.
    I don't have that option on the side that says what device is connected so I can't sync or anything.

  • I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server.

    I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
    Thank you!

    Alright it didn't solve it. Any other suggestions?
    I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
    There was a Problem connecting to the...: Apple Support Communities

  • HT3887 Having trouble connecting blutooth on my laptop. Devices are paired but it says "not connected". I've gone thru System Pref. with no luck. Can anyone give me step by step help to reconnect BLUETOOTH? plz, ty

    Having trouble connecting blutooth on my laptop. Devices are paired but it says "not connected". I've gone thru System Pref. with no luck. Can anyone give me step by step help to reconnect BLUETOOTH? plz, ty

    Hi:
    There are no dumb questions...answers, yes, but not questions.   Sometime I use acronyms and forget that I should explain things a bit more. 
    Resetting those two things sometimes helps and cannot hurt.
    SMC=system management controller:
    http://support.apple.com/kb/HT3964
    PRAM=parameter random-access memory:
    http://support.apple.com/kb/PH4405
    If that does not help, delete the phone from your computer (system preferences>Bluetooth), restart, and then add it back in:
    http://support.apple.com/kb/PH3660
    Barry
    P.S.  If everything fails and you are near an Apple store, make an appointment with a "genius" and take the devices in for them to assist.

  • I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

    I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

  • I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

    I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

    Check this out....
    http://support.apple.com/kb/HT1664

  • Virus??? computer having trouble connecting to internet

    Last week, my son's school computer got a virus, and sent me about 50 copies of the same email message. Since then, things have not been working properly on my macbook. Safari is telling me it can't connect to the internet, even though the network diagnostic tool tells me there is no problem. Mail is having trouble connecting too, and my idisk is suddenly inaccessible. I wanted to restore to a previously saved backup of my personal settings that I have been saving to my idisk but backup said it couldn't connect to the idisk. Backup also gave me a scary message when I had no choice but to abort the "restore".
    I've seen lots of messages here claiming that there are no mac viruses, but if that is the case, what could be going on here? I already rebooted several times, and repaired permissions on the hard drive. any other suggestions???

    Hey, Mort, thanks. I did find clamxav last night on the web and left it running this morning (I'm at work now.) So we'll see what it has or has not found when I get home later. It didn't allow me to just run the software on my whole hard drive, though, I had to choose folders. I chose the system and library. Do you have any other ideas about where the virus (if it is a virus) could be living?
    I'm not sure if my system has been updated. I run "software update" once a week so perhaps it has already happened. I'll check tonight.

  • I am having trouble connecting to internet with my iphone 5,  Are there any issues with with iphone 5 that would cause this problem?

    I am having trouble connecting to internet with my iphone 5,  Are there any issues with with iphone 5 that would cause this problem?

    Perhaps something in Apple's support article on troubleshooting problems with WiFi connections will help:
    http://support.apple.com/kb/TS1398
    Regards.

  • I can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

    can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

    I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
    Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
    For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
    Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
    If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
    Click Add, then you can close System Preferences.
    There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

  • I am having trouble connecting to a particular person via face time. I dont have any problems connecting with other people

    I  am having trouble connecting to a particular person via face time. I dont have any problems connecting with other people. They are in Japan I am in Australia. Would that make a difference?

    Unable to make or receive FaceTime calls after April 16, 2014

  • I have an iphone 5, 2 months old. i am having trouble connecting with any device through bluetooth.

    i have an iphone 5, 2 months old. i am having trouble connecting with any device through bluetooth
    can not find any other device .like my car CD or other bluetooth audio device even my laptop.
    i will be grateful fi some one can help
    best regards
    sam

    And I forgot to mention I have just changed email addresses so with the old email it was all working then with the new email I'm only functioning one direction.

Maybe you are looking for

  • Function Logic

    Hi All, I created a function call which builds a WHERE clause CREATE OR REPLACE FUNCTION test(p_organization_in IN VARCHAR2) RETURN VARCHAR2 IS v_where_clause VARCHAR2(1000); CURSOR c_cur IS SELECT organization, channel_id, hierarchy_id FROM applicat

  • Tips for Exporting 1920 X 1080 HD for use in iDVD?

    I have a Canon HF20 and noticed that exporting from iMovie '08 using Share >Media Browser or Share > Export Movie limits you to 960 X 540. I used iDVD to create a DVD of the 960 X 540 movies and had good results, but I am wondering if the 960 X 540 r

  • MY MAC PRO CAN'T FIND THE BUILT IN SPEAKERS

    My mac can't find the built in speakers. All it finds is digital out. What do i do?

  • Std. function module u2018'FITP_CREATE_TRIP_FROM_REQUEST' is not creating trip

    Hi We have user the Std. function module u2018'FITP_CREATE_TRIP_FROM_REQUEST' in Webdynpro abap and employees were able to create Trips. but now after a system upgrade to EPh4 suddenly the function module has stopped working. now when a person trys t

  • Error-42404 pops up when trying to download iTunes

    Even though I have updated QuickTime, iTunes still wont install. And another message says that I don't have iTunes.msi. What is that and how do I get it? At this point I don't know what to do, because I have tried all sorts of things. Does anyone els