Having trouble connecting to FaceBook (fb) via my iPad

hello . . . I am having trouble connecting to FaceBook (fb) via my iPad . . . I seem to connect to other sites easily, but fb is a no-go. My fb account on the computer is working brilliantly.
Error Code: FBAPIErrorDomain
Any suggestions . . . please

Yep. Good point.
To completely shut it down, even in the background, double click the home button to display the row of apps. Then press and hold the Facetime app until the app displays a minus sign. then touch the minus sign.
The app is now stopped !

Similar Messages

I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?

I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

Check this out....
http://support.apple.com/kb/HT1664

I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
A1409 Gen 4.. The new AC is A1470
How is it setup?
I need the whole network setup. what modem/router, how is the TC connected etc??
I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in.

I am having trouble connecting to my computer via the personal hotspot on my iPhone 5s, can anyone help?

My iPhone 5s will not connect via wi fi to my computer using the hotspot. sometimes , if I plug it in via USB it works but most times the blue"personal hotspot connection" bar just jumps and does nothing else. Anyone , can you help?

If nothing else is working, I would reset the network settings on the iPhone. Settings/General/Reset/Reset Network Settings. Nothing will be erased from the phone, but you will need to re-enter any wifi connection you had set up previously along with re-enter any bluetooth connection you had.

Am having trouble connecting to remote site via FTP in DW CS6

It is asking for a SERVER NAME... What is that supposed to be ?? [First line in remote connection setup]

Did you define your site in DW yet?
Site > New Site or Manage Sites...
Your hosting provider sent you log-in credentials when you signed-up for hosting. Refer to that e-mail for the correct info to enter under Servers. See screenshot.
Nancy O.

I am having trouble connecting to o2 in Germany with. iPad bought in Australia

Cn anyone help me with this issue

Not really since you didn't say specifically what the trouble is.
Did you buy a pre-paid O2 SIM card and put it in the iPad?

TS1368 I am having trouble connecting to itunes on PC and ipad with "The item you've requested is unavailable in the UK store" coming up when I try and connect to iTunes.

Is anyone else having problems? I keep getting "The item you've requested is not currently available in the UK store." This happens on my PC and my iPad

There are lots of comments about his over in this thread https://discussions.apple.com/thread/5271084?tstart=0

I am having trouble connecting to my in-home internet via wireless router. It says it is connected, but when I try to open email, no connection is found. This also occurs for Safari and Facebook. I am connected by Charter Cable.

I am having trouble connecting to my in-home internet via my wireless router. The IPad says I'm connected to the router, but I am unable to receive email, Facebook and Safari. I run through Charter Cable. This only occurs on my IPad. My desktop works fine.

Although it may ultimately be necessary to perform a Factory Default Reset on the AirPort Extreme and start over with a new configution, we can first try to see if things will work with the existing settings on the device.
Push the reset button (if present) on the cable modem
Power off the modem by pulling the power cable
Remove the internal battery from the modem (if easily accessible)
Power off the AirPort Extreme and every other device on the network....order is not important
Wait at least 20 minutes....longer is better
Re-install the battery in the modem if it was removed previously
Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots icon) on the AirPort Extreme
Power up the modem and let it run 4-5 minutes buy itself
Power up the AirPort Extreme and let it run 4-5 minutes
Then power up each other network device one at a time about a minute apart
Check for a good Internet connection on the network with all devices
If still no luck, you will need to perfom a Factory Default Reset on the AirPort Extreme as follows:
Pull the power plug from the back of the AirPort Extreme
Hold in the reset button and keep holding it another 8-10 seconds while you simultaneously plug the power back in to the AirPort Extreme
Release the reset button and allow 25-30 seconds for the AirPort Extreme to restart to a slow, blinking amber light
Then open AirPort Utility end reconfigure the AirPort Express again.

New iPad having trouble connecting to Internet via Wifi.

I have had all 3 iPads and I got the new one on Friday, however starting today I have had a lot of trouble connecting to the Internet via Wifi. I could not connect at home nor at school where I have had no problems before with my previous iPads, and all my friends are having not having any problems connecting to the Internet with their iPad 2's. Is there something wrong with the new iPads?
I have a 3rd generations iPad 16GB Wifi only.

Kdpe222-
Then you may have a defective iPad If you can show it to an Apple Store Genius, you may get a replacement if the Genius can not fix it.
If there is no Apple Store near you, look for an Apple Authorized Repair Center. There may be one in your city. <Apple Authorized Repair Centers>
To continue on your own, take a look at <Troubleshooting WiFi Networks and Connections>.
Fred

Having trouble connecting candy crush saga to my Facebook acct on my iPad

Having trouble connecting candy crush saga to my Facebook acct on my ipad

Mr. Chodman has the answer, and I quote
I also had the same issue. I tried the suggestions in this post and was unsuccessful.
Just follow tine instructions here, like the post above,, and it WORKS !!!!
"I resolved mine by these steps:
1. Activate paring on Jaybird headset
2. Click on "Set up Bluetooth Device" on Mac
3. Select your Jaybird to pair with. (It will tell you it is already paired if you have already tried)
4. Click Ok and Continue, then it should pair with device.
It works every time.
My headset immediately connected and the sound worked good."
Same thing or me.
Thanks
David

I am having trouble connecting to a particular person via face time. I dont have any problems connecting with other people

I am having trouble connecting to a particular person via face time. I dont have any problems connecting with other people. They are in Japan I am in Australia. Would that make a difference?

Unable to make or receive FaceTime calls after April 16, 2014

I am having trouble connecting IPAD1 to wireless any suggestions?

I am having trouble connecting my IPad1 to Belkin Wireless Router. It was working fine until a couple of days ago. I can use my IMAC okay via wireless. I can see my network on the IPad, but message comes up "unable to join the network XXXX". I have read the Apple recent release to fix this problem...still no luck. Can anyone please help?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Having trouble connecting column to column using niSwitch on a PXI 2530

Having trouble connecting column to column using niSwitch vi on a PXI 2530 matrix module. I have configured my switch using Switch Executive, have identified aliases, and verified routes and route groups. When I use LabVIEW to connect column to column I get an error reading "cannot find connection between c0 and c1". c0 and c1 are example columns I want to connect. Any help is appreciated.

You can find NISE VIs in the function pallete in LV if you have installed LabVIEW support when you installed NISE (this is selected by default in the installer if you had LV installed before installing NISE).
Also, choose between niSwitch and NISE based on your need - if all you ever do is connect two channels in your application, then configuring a NISE virtual device is probably an overkill (and so is using a switch in this case:-) . However, if you are going to manage multiple routes, then using NISE configuration will let you create named routes and route groups, which you can then invoke (connect/disconnect) in your application and have the configuration part managed outside your application. The code would then concentrate solely on establishing a necessary connection(s) via connecting a route or a route group, while if you were to use niSwitch for this purpose, you would have to keep the logic of connecting inside your application, together with the list of channels that need to be connected.
Start with using NISE, and see if you like it.
http://www.ni.com/pdf/products/us/3msw112-113.pdf
Srdan Zirojevic

I am having trouble connecting my iPad mini with my lap top that run Xperia

I am having trouble connecting my iPad mini with my lap top that run Xp

Hi..I've had a variant of this problem; my internet was accessible but my devices on wifi could not see the PC on Lan. That meant no iTunes syncing, Airplay from iTunes etc.
Dlink has a strange default setting that isolates Wifi & Wired connections into different subnets.I'm assuming you have DHCP setup on your router and you're PC or MAC has internet access via the same router. Try the following steps to see if this solves the problem for you-
1. Go to Setup -> Local Network and Uncheck the box that says 'Configure the second IP Address and Subnet Mask for LAN' - Hit Apply
2. Go to Wireless -> Wireless Basic and Uncheck 'Enable MultiAP Isolation' - Hit Apply
3. Restart your Router
Let me know if this solves your problem. I've been frustrated by my problem for months & had nearly given up.
J

Having trouble connecting to FaceBook (fb) via my iPad

Similar Messages

Maybe you are looking for