Having Trouble connecting to Ruckus Hotspot

Have the correct password and close enough to the router, but keep getting the spinning hour-glass.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • Is anyone else having trouble connecting to bt hotspots from iPads and iPhones

    I am trying to connect to a bt internet hotspot using either my iphone or my ipad but it won't connect bt says the problem is with apple not them, any ideas ?

    reset your ipad connection settings by going to settings > general > reset > reset network settings

  • Im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI.  I have the most success with the following operations in this order:
    1)  Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
    2)  Plug the mini displayport end of your new super-cable to the computer.
    3)  Plug the HDMI end into your TV.
    4)  Switch inputs on your TV to the proper input.
    5)  If still nothing on the TV, try a different HDMI port on your TV.
    Hopefully this helps!  Good luck.

  • I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

    I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

  • I'm having trouble connecting my iphone to my itunes on my computer

    So for christmas I got an iPhone and currently, I'm having trouble connecting my iPhone to my iTunes on my computer. If I get on my computer and open my iTunes, I can use it perfectly fine but once I tried to connect my phone to it, it told me the software needed to be updated before it would work with my phone. I went to the website and tried downloading the updated version 10 times but every time it told me it couldn't connect with an apple device or something. So then I tried just going to my downloads and stuff and moving the actual song straight to my phone but it would always tell me my device has ended or has been disconnected. All I'm trying to do is move some songs onto my phone from my computer. They weren't purchased straight from iTunes so it's not showung up in my "purchased" on my phone. (I think I got them from amazon and some are cds that I my computer that I got years ago. Maybe thats why they don't show up in the purchased?) Anyway, how can I fix this? I have a windows computer if that can help at all. Thanks!!!

    Also, I just opened my iTunes on my computer then plugged my phone to the computer and a box popped up saying "This iPhone cannot be used because the Apple Mobile Device is not started"
    I have no idea what that means.
    I don't have that option on the side that says what device is connected so I can't sync or anything.

  • I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4.  I am currently connected to a perfectly running WiFI connection.  Why am I not able to connect anything?  I've tried ALL the fixes suggested.  HELP!!!!!!!!!

    I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4.  I am currently connected to a perfectly running WiFI connection.  This just started happening today (2/19/14)!  Why am I not able to connect anything?  I've tried ALL the fixes suggested.  HELP!!!!!!!!!  BTW, I know my Wi-Fi connection is good because I'm using it on my desktop and other people in my office are also connected on their iPhones and desktops.  Again, HELP!!!!

    You may not really be connected to your WiFi network.
    Your router may not have given your iPhone a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPhone (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad

    My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad.

    Same issue here too.  I will try reinstalling the firmware update.  This has happend to me twice.  The only way to correct the issue was to reboot.
    Thanks!

  • I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

  • Having trouble connecting computer to TV with sound

    I have a 2010 macbook pro and a samsung LN40B550 LCD HDTV - having trouble connecting computer to TV with sound - I'm not sure which connectors I need and have purchased a few that aren't working (HDMI: DVI cable & Mini - DP to DVI adaptor).  Any help would be greatly appreciated. Thanks

    Sorry to tell you that DVI does not support sound.  You either have to use a HDMI cable (with the appropriate adapter) or tap your audio output port with a 'Y' type cable configuration for sound.
    Ciao.

  • Hi, My daughters just got an ipod touch today and I'm having trouble connecting it to my Wi-Fi network!??

    Hi,
    My daughters just got an ipod touch today and I'm having trouble connecting it to my Wi-Fi network.  It identifies my wireless connection but then says 'unable to join the network' with the word 'Dismiss' underneath.  Any ideas on what I can do? Thanks!!

    Hi
    Thanks for your reply.  I've tried resetting a few times. There is no 'tick' next to the name of my wireless connection so it won't connect at all.  I think I may have to do something with my router as there is an arrow button to press next to my wireless name, this takes me to a screen which asks for IP address, then has options for DHCP   BootP and Static, it asks for Client ID DNS etc - all gobbledegook to me!!   Perhaps my router is blocking the Ipod?
    Thanks anyway!

  • Im having trouble connecting ipod  to denon avr x1000

    im having trouble connecting ipod  to denon avr x1000

    Those converters like the AsanteTalk are notorious for not re-acquiring Printers that drop out for any reason.
    Get everything else powered up, then cycle off the AsanteTalk, count slowly to 10, then power the AsanteTalk on last.

  • Having trouble connecting ipad to computer

    having trouble connecting ipad to commputer

    I assume that you mean iTunes is not recognizing the iPad.
    iOS: Device not recognized in iTunes for Windows - Support - Apple

  • I am having trouble connecting IPAD1 to wireless any suggestions?

    I am having trouble connecting my IPad1 to Belkin Wireless Router. It was working fine until a couple of days ago. I can use my IMAC okay via wireless. I can see my network on the IPad, but message comes up "unable to join the network XXXX". I have read the Apple recent release to fix this problem...still no luck. Can anyone please help?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Having trouble connecting iPad to TV utube video says go to settings find video then an option comes up that option is not available on my ipad

    having trouble connecting iPad to the TV to play a video

    Hi Norfolk33,
    It sounds like you are trying to Airplay Mirror your iPad to your Apple TV.
    Please see this article for help troubleshooting AirPlay Mirroring.
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
    Best regards,
    Nubz

  • Having trouble connecting column to column using niSwitch on a PXI 2530

    Having trouble connecting column to column using niSwitch vi on a PXI 2530 matrix module.  I have configured my switch using Switch Executive, have identified aliases, and verified routes and route groups.  When I use LabVIEW to connect column to column I get an error reading "cannot find connection between c0 and c1".  c0 and c1 are example columns I want to connect.  Any help is appreciated.

    You can find NISE VIs in the function pallete in LV if you have installed LabVIEW support when you installed NISE (this is selected by default in the installer if you had LV installed before installing NISE).
    Also, choose between niSwitch and NISE based on your need - if all you ever do is connect two channels in your application, then configuring a NISE virtual device is probably an overkill (and so is using a switch in this case:-) . However, if you are going to manage multiple routes, then using NISE configuration will let you create named routes and route groups, which you can then invoke (connect/disconnect) in your application and have the configuration part managed outside your application. The code would then concentrate solely on establishing a necessary connection(s) via connecting a route or a route group, while if you were to use niSwitch for this purpose, you would have to keep the logic of connecting inside your application, together with the list of channels that need to be connected.
    Start with using NISE, and see if you like it.
    http://www.ni.com/pdf/products/us/3msw112-113.pdf
    Srdan Zirojevic

Maybe you are looking for

  • Códigos de Países

    Abaixo uma lista de 47 países que consta na tabela do BACEN mas que não estão no SAP . Para criá-los precisamos do código de 2 letras (Cty) do país para incluí-los na tabela ZVXLNFEBACEN. Estes também não existem na T005. Sabe de onde podemos consegu

  • Chinese Characters on Zen Mi

    (repost in Asia forums as it might be more appropriate) I have just got the Zen Micro and must say I am quite impressed with it overall. However, there is one problem which really prevents me from enjoying the player, and that is that the player is u

  • Cannot select line in for recording

    I am trying to use Adobe Audition on windows xp media center edition (because their too stupid to make it for mac) through boot camp. i installed all the drivers and can record using the built in mic, but there is no way to select the line in. lets g

  • Recreate Output post processor

    Hi, How to delete and recreate a new Output post processor. OPP is not coming up even after bouncing the app, server, also autoconfig. So thinking of recreating. Below is the opp log error. Exception in static block of jtf.cache.appsimpl.AppsCacheLog

  • Blank error message in R-CNR tree

    Hi All. We are getting a blank error message while viewing the visualization of R-CNR tee graph whereas we can see the summary without any issue. I have attached the screen shot for more clarification. Thanks, M.Sumesh