Having trouble connecting to wi-fi
I can no longer connect to home network wi-fi connection. This started recently, I was able to connect automatically without using a password. Now after I put my password in, it states it is unable to connect. My wi-fi is turned on and the signal strength is excellent.
Your ipod will find any networks that are 'broadcasting' their network ID. If your not set to broadcast, your ipod will never find it (but you could add it manually, on the ipod). There is no way to connect your pc to your ipod or 'add it to your network' like a drive, though. There are apps that do this, for wireless file transfers, though--try "Air Sharing". It uses a program called Bonjour to establish a wireless connection to your iPod and let's you transfer documents of any kind to it. It also has instructions on making this connection.
However, if you can't simply connect to your network, you need to change the router settings to broadcast, then you should be able to connect (make sure you know the WEP code, as well). You should only have to enter it once and it will always remember it, unless your restore.
Similar Messages
-
im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!
I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI. I have the most success with the following operations in this order:
1) Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
2) Plug the mini displayport end of your new super-cable to the computer.
3) Plug the HDMI end into your TV.
4) Switch inputs on your TV to the proper input.
5) If still nothing on the TV, try a different HDMI port on your TV.
Hopefully this helps! Good luck. -
I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?
Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this. -
I'm having trouble connecting my iphone to my itunes on my computer
So for christmas I got an iPhone and currently, I'm having trouble connecting my iPhone to my iTunes on my computer. If I get on my computer and open my iTunes, I can use it perfectly fine but once I tried to connect my phone to it, it told me the software needed to be updated before it would work with my phone. I went to the website and tried downloading the updated version 10 times but every time it told me it couldn't connect with an apple device or something. So then I tried just going to my downloads and stuff and moving the actual song straight to my phone but it would always tell me my device has ended or has been disconnected. All I'm trying to do is move some songs onto my phone from my computer. They weren't purchased straight from iTunes so it's not showung up in my "purchased" on my phone. (I think I got them from amazon and some are cds that I my computer that I got years ago. Maybe thats why they don't show up in the purchased?) Anyway, how can I fix this? I have a windows computer if that can help at all. Thanks!!!
Also, I just opened my iTunes on my computer then plugged my phone to the computer and a box popped up saying "This iPhone cannot be used because the Apple Mobile Device is not started"
I have no idea what that means.
I don't have that option on the side that says what device is connected so I can't sync or anything. -
I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4. I am currently connected to a perfectly running WiFI connection. This just started happening today (2/19/14)! Why am I not able to connect anything? I've tried ALL the fixes suggested. HELP!!!!!!!!! BTW, I know my Wi-Fi connection is good because I'm using it on my desktop and other people in my office are also connected on their iPhones and desktops. Again, HELP!!!!
You may not really be connected to your WiFi network.
Your router may not have given your iPhone a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPhone (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad.
Same issue here too. I will try reinstalling the firmware update. This has happend to me twice. The only way to correct the issue was to reboot.
Thanks! -
I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned
Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?
-
Having trouble connecting computer to TV with sound
I have a 2010 macbook pro and a samsung LN40B550 LCD HDTV - having trouble connecting computer to TV with sound - I'm not sure which connectors I need and have purchased a few that aren't working (HDMI: DVI cable & Mini - DP to DVI adaptor). Any help would be greatly appreciated. Thanks
Sorry to tell you that DVI does not support sound. You either have to use a HDMI cable (with the appropriate adapter) or tap your audio output port with a 'Y' type cable configuration for sound.
Ciao. -
Hi,
My daughters just got an ipod touch today and I'm having trouble connecting it to my Wi-Fi network. It identifies my wireless connection but then says 'unable to join the network' with the word 'Dismiss' underneath. Any ideas on what I can do? Thanks!!Hi
Thanks for your reply. I've tried resetting a few times. There is no 'tick' next to the name of my wireless connection so it won't connect at all. I think I may have to do something with my router as there is an arrow button to press next to my wireless name, this takes me to a screen which asks for IP address, then has options for DHCP BootP and Static, it asks for Client ID DNS etc - all gobbledegook to me!! Perhaps my router is blocking the Ipod?
Thanks anyway! -
Im having trouble connecting ipod to denon avr x1000
im having trouble connecting ipod to denon avr x1000
Those converters like the AsanteTalk are notorious for not re-acquiring Printers that drop out for any reason.
Get everything else powered up, then cycle off the AsanteTalk, count slowly to 10, then power the AsanteTalk on last. -
Having trouble connecting ipad to computer
having trouble connecting ipad to commputer
I assume that you mean iTunes is not recognizing the iPad.
iOS: Device not recognized in iTunes for Windows - Support - Apple -
I am having trouble connecting IPAD1 to wireless any suggestions?
I am having trouble connecting my IPad1 to Belkin Wireless Router. It was working fine until a couple of days ago. I can use my IMAC okay via wireless. I can see my network on the IPad, but message comes up "unable to join the network XXXX". I have read the Apple recent release to fix this problem...still no luck. Can anyone please help?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
having trouble connecting iPad to the TV to play a video
Hi Norfolk33,
It sounds like you are trying to Airplay Mirror your iPad to your Apple TV.
Please see this article for help troubleshooting AirPlay Mirroring.
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Best regards,
Nubz -
Having trouble connecting column to column using niSwitch on a PXI 2530
Having trouble connecting column to column using niSwitch vi on a PXI 2530 matrix module. I have configured my switch using Switch Executive, have identified aliases, and verified routes and route groups. When I use LabVIEW to connect column to column I get an error reading "cannot find connection between c0 and c1". c0 and c1 are example columns I want to connect. Any help is appreciated.
You can find NISE VIs in the function pallete in LV if you have installed LabVIEW support when you installed NISE (this is selected by default in the installer if you had LV installed before installing NISE).
Also, choose between niSwitch and NISE based on your need - if all you ever do is connect two channels in your application, then configuring a NISE virtual device is probably an overkill (and so is using a switch in this case:-) . However, if you are going to manage multiple routes, then using NISE configuration will let you create named routes and route groups, which you can then invoke (connect/disconnect) in your application and have the configuration part managed outside your application. The code would then concentrate solely on establishing a necessary connection(s) via connecting a route or a route group, while if you were to use niSwitch for this purpose, you would have to keep the logic of connecting inside your application, together with the list of channels that need to be connected.
Start with using NISE, and see if you like it.
http://www.ni.com/pdf/products/us/3msw112-113.pdf
Srdan Zirojevic -
Having trouble connecting SQL Developer to database on LINUX machine
Having trouble connecting SQL Developer to database on LINUX machine
Hello,
I am trying to connect my windows 7 home premium machine to an oracle database 11g on a RedHat 5 machine using SQL Developer. i got this error message on SQL Developer
Status : Failure - Test failed :The Network Adapter could not establish the connection
on Linux
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 03-APR-2013 16:13:13
Uptime 7 days 22 hr. 16 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/11.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.X.X.X)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orc11g" has 1 instance(s).
Instance "orc11g", status READY, has 1 handler(s) for this service...
Service "orc11gXDB" has 1 instance(s).
Instance "orc11g", status READY, has 1 handler(s) for this service...
Service "orc11g_XPT" has 1 instance(s).
Instance "orc11g", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> and TNSPING
tnsping 172.x.x.x
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 11-APR-2013 14:32:17
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
Used EZCONNECT adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.x.x.x))(ADDRESS=(PROTOCOL=TCP)(HOST=172.x.x.x)(PORT=1521)))
OK (0 msec)
[oracle@ltebilling ~]$Tnsnames.ora On Linux ,
ORC11G =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orc11g)
)Listner on Linux ,
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
)/ect/hosts Linux ,
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
172.x.x.x LTEBillingand there is no problem of ping linux from windows
Edited by: user11309581 on Apr 11, 2013 3:16 PMyes really i'm already enaple the port 1521 and SELINUX=disabled
[root@ltebilling ~]# /etc/init.d/iptables status
Table: filter
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
Chain RH-Firewall-1-INPUT (2 references)
num target prot opt source destination
1 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
2 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 255
3 ACCEPT esp -- 0.0.0.0/0 0.0.0.0/0
4 ACCEPT ah -- 0.0.0.0/0 0.0.0.0/0
5 ACCEPT udp -- 0.0.0.0/0 224.0.0.251 udp dpt:5353
6 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:631
7 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:631
8 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
9 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:1521
10 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
11 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibitedbut from windows system when i'm try tnsping i got this error
C:\Windows\system32>tnsping orc11g
TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 11-APR-2
013 14:44:09
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
D:\app\ubai\product\11.2.0\dbhome_2\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x
.x)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orc11g))
TNS-12535: TNS:operation timed out
C:\Windows\system32> -
I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found
Check this out....
http://support.apple.com/kb/HT1664
Maybe you are looking for
-
How do i get fdf data to open in my pdf form
I created a fillable pdf form for one of my employers to fill in terminated employees then email back to me. I have two or three problems. First, when i receive the email back I have the fdf attachment with the form, when I try to open it, I get a me
-
Issue In processing an IDoc with Huge Segments
Hi All, When we are trying to process an Huge IDoc which has large number of segments. The IDoc process starts and stops in the middle and remains in 64 status ( there are no short dumps etc). Currently the IDoc is configured to be Trigger Immediatly
-
Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white
-
Change employee sub group code in configuration
Hello Fellows, I have requirement to change employee sub group code in configuration. For example there are existing code starting AA text1, AB text2 and so on. I want to change it with 10 text1, 11 text 2. System is allowing to change text only (i.
-
The installation failed. Photoshop CS2
I tried to install on my mac photoshop cs2 and gave this error. The installer encountered an error That Caused the installation to fail.