Having trouble getting my uploaded cds which are in itunes and working properly to transfer to my iphone, only purchased songs sync

having trouble getting my uploaded cds which are in itunes and working properly to transfer to my iphone, only purchased songs sync

Do you have the songs in a Playlist.

Similar Messages

I am having trouble getting my music from my macbook pro itunes to my iPhone

I cannot put my music from my mac onto my iphone. I try to drag to to my connected iphone icon, but it will not go into the icon. I got my mac after my iphone which is why I might be having trouble but I'm not able to put any music I get on my mac onto my iphone. Please Help!

do you have manual manage music checked?

I am having trouble getting Adobe Flash to run, I have uninstalled and reinstalled?

I am having troublegetting Adobe Flash ot run, I have uninstalled all Adobe products and Google Chrome , shut off the computer, and reinstalled everything the page says Installed Sucessufly but will not run Videos. What else can I do or what may I fix? Please Help

Hi,
What's your operating system and browser?
You should ensure that Flash Player is enabled in your browser.
If you are using Windows and Internet Explorer:
- Disable ActiveX Filtering
- Enable Flash Player in Internet Explorer
Thanks,
Sunil

I have installed the new i OS 7 on my IPAD, I am having trouble with sending messages. I reset the imessage and networking as I did for the iphone but it still does not allow messages to be deleivered. any suggestions?

I have installed the new iOS 7 on my I Pad and am having trouble with messaging, I reset the imessages and networking and the messages are still not being deleivered.

Reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

I am having trouble getting Mail to import my Hotmail. It was working well up to around xmas but since then it hasn't worked at all. Keeps asking for my mail password and when I put it in nothing happens or it pops up again asking for it.

I have been using mail for quite a while and no issue. Before xmas for some strange reason my computer asked me for my keychain password. I couldnt remember and hence lost control of my mail boxes. I deleted the keychain and then started putting in the passwords again. My icloud mail is working fine as is imessage and facetime. For some strange reason it wont work with my hotmail address. It keeps poping up asking for the password for the hotmail email and I keep putting it in but no mail arrives or goes. I have looked in the new keychain and it is in there. I have tried adding it in the mail settings and saved it but it dont save. I have deleted the mail account and started again by inputting it as new and it gets its settings then and same result. Any ideas?

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

Hey I 'm having trouble adding music from my computer to my itunes and have tried some of everything can someone help plz?

in serious need of help trying to add mucis from my computer to my itunes

What format is the media in? What happens when you try?
It may be a permissions problem. See Repair security permissions for iTunes for Windows.
tt2

Trying to re ord with a live mic but having trouble getting a good record or playback volume. As far as i know all my settings in system preference are correct. What am i missing?

Trying to record with an external mic, but having trouble getting a good record or playback volume. As far as i know all my settings in system preference are correct. What am i missing?

MartyJames777 wrote:
Trying to record with an external mic, but having trouble getting a good record or playback volume.
http://www.bulletsandbones.com/GB/GBFAQ.html#micline
(Let the page FULLY load. The link to your answer is at the top of your screen)

Since downloading mountain lion we are having trouble getting on the internet

since downloading mountain lion we are having trouble getting on the internet

Try restarting your router, but I will need more info like how are you trying to connect wi-fi, Ethernet, type of connection cable or DSL what type of router Apple, Linksys.

I have been having trouble getting my email on my iPad. It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it. I can send emails, but can't get them

I have been having trouble getting my email on my iPad2.
It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it.
I can send emails, but can't get them.
Any ideas, people?

Hi Kharels
Just posted this reply to 2 others with same sort of question:
I have the same issue as i have my own email address and only want to use.
There are two ways around this annoying problem. The first is to set up your own domain email account alongside your iCloud one, and when you go to send each email tap on From and you get a choice of emails addresses to reply from... ie your own domain or the iCloud one. This is tedious though.
The other is to set up your iCloud email as normal, then create a new one altogether. Choose 'Other' when creating this new account. Then put for the incoming server mail.me.com, along with your user name and password. For the outgoing server put the server you want to use - ie your own domain one. This is therefore a hybrid account and does work.
Now switch off the email for iCloud (leaving on Calendar, Address Book etc). Switch on the email for your hybrid account (which of course is iCloud incoming as well).
Providing you have directed your own domain email address to your me.com one, you will find the iPhone should behave itself and you can use the folders etc and these will synch with your Mac ok.
Hope this work for you - let us know.
Simon

Having trouble getting my Lightroom 5.0 upgrade to accept my Lightroom 4.4 serial number.

I am having trouble getting my Lightroom 5.0 upgrade to accept my Lightroom 4.4 serial number. I recently installed Windows 8, 64 bit on a second solid state HD on my computer (had a virus problem for which I had to format C and reinstall everything). The new ss HD is drive C and my operating system and my programs are all installed there. All my documents and files are now stored on my original, reformatted drive, which is now drive D. I was using Windows 7, 64 bit. Could all this be the reason my serial number is not being recognized? PHH

Hi 48phh,
Yes Lightroom 5 takes the Serial Number of each previous version and you can do the Upgrade from any 1, 2 3, or 4 version of Lightroom,but somethig different for the Upgrade from the Mac App Store ... see how here: http://helpx.adobe.com/lightroom/kb/upgrade-mac-app-version-lightroom.html
you installed Windows 8 and installing only the operating system, but keeping all the app certainly and during the operation something can be lost, especially if you run Clean after installing the system by deleting the folder containing the old system, it's better to wait to do so.
However, no problem, because to do the 'Upgrade all you need is the old serial number and don't need Lightroom4 to be installed on your machine ...
more details here: http://blogs.adobe.com/lightroomjournal/2013/06/lightroom-5-hot-issues.html

HT4796 im having trouble getting my laptop to connect to my mac using windows migration assistant. my mac comes up with a code but my laptop is waiting for my mac to respond but nothing happens

hi all
im having trouble getting my laptop to connect to my mac using migration assistant. my mac has a code on the screen but my laptop doesnt respond and just says it waitng for my mac to respond.
any idea? please

Hi Christina, belated welcome to Apple Discussions if nobody said it already.
I've had some experiences with these new flash memory recording camcorders, and I'll give you a quick rundown of what I've learned. Many of them (JVC, Panasonic, etc.) tend to record in a .MOD file format, which is non-standard, proprietary, and unrecognizable by most software. I thought Canon was usually a little more standards-compliant, but it appears they also use this .MOD format in your specific camera model. There are likely a couple ways we can get around this though!
In order to play the files, you will likely need to change their file format (.MOD) to .AVI manually. You'll have to locate the files on your Mac, and then manually change the file names so that the file extension (after the period) is .AVI
At that point, a video player application such as http://www.videolan.org/vlc/download-macosx.html>VLC should play the files fine!
You should be able to transfer new video files from the camera to the Macbook Pro with no problems as well. Just plug in the camera to the computer via USB, and also make sure the camera is plugged in to charge. Once it's plugged in, open iMovie (came with the MBP, in the Applications folder) and the MBP should take care of the rest.
Let me know if you have any success with any of this!
FYI, the thread that I got some of the above information from is here:
http://forums.macrumors.com/showthread.php?t=478326
--Travis

I am trying to boot Ubuntu 12.4 on my iBook G4, but am having trouble getting my iBook to recognize the boot disk in the CD Drive. Why?

I am trying to boot Ubuntu 12.4 on my iBook G4, but am having trouble getting my iBook to recognize the boot disk in the CD Drive.
I have pressed "C" during boot to force it to boot from the Optical Drive. It boots normally.
I have pressed "option" to get the boot menu. The only option available is my hard disk drive.
I have pressed "option""command""shift""delete" at the same time during boot to force it to skip booting the hard disk. I get a blinking smily face/question mark for a while, then it shows the boot menu, at which point the only available option is my hard disk drive.
In system preferences in OS X I have looked to change the boot drive, but the only option, again, is the hard disk.
Can I not boot from the Optical Drive?
Why?

Hello,
From the link I provided it says:
Nearly all open-source software is available to download from the Ubuntu repositories, but the amount of proprietary software available for PowerPC linux is limited. You will have the same version of Firefox, LibreOffice, etc as other architectures.
Notable absentees are: Chrome/Chromium, Adobe Flash (although open-source alternatives are available, see below), Wine (however Qemu can be used, see below), ndiswrapper, proprietary video drivers and Dropbox (but, you can use Ubuntu One).
I do recall it being very limited when it came do downloading Linux software that supported PPC.
You wouldn't be any better off than using firefox or safari on Mac OS X 10.4.11.
If your looking for a faster and more compatible web browser then I would suggest the following, which I've recently found very useful on Mac OS X 10.4
http://www.floodgap.com/software/tenfourfox/
Hope this helps.

I'm having trouble getting a custom JPanel to display correctly...

HI, I'm having trouble getting a custom JPanel to display correctly. I'm using the JPanel inside a JFrame to display some really custom graphs. The graphing side of this whole thing works flawlessly. The problem I'm having is that when I close the JFrame by using setVisible(false); and then openning it again using setVisible(true); all the information on it is garbage. There are buttons from the JFrame which orgininally opened it and it has trouble openning a second graph if I choose too. I also have the same problem if i move the frame off the screen and move it back. I'd really appreciate any help.
Thanks!

With option #1 -- I modified and rebuilt the 3rd-party JARs and referenced them in NetBeans. When I choose clean and build, the Ant processes results in an error: "jarsigner returns 1". So it doesn't seem to run at all.As long as you rebuilt the jars correctly without the original signature, I think it should work.
An example of unsigning a jar using ant is here:
http://frank.zinepal.com/unsign-a-jar-with-ant
Do you think the multiple-JNLP idea would work if NetBeans didn't apply "my" signature to the 3rd-party JARs? Aside from manually copying the original JARs into the \dist directory, is there a better way to tell NetBeans to leave the 3rd-party JAR alone (ie, don't sign it again)?I think it's supposed to work (it's the mixed code signing situation I referred to in my prior post).
For example, from your description it sounds like the default NetBeans build doesn't really support this style of deployment, so you would have to create a custom build which does what you need and is not triggered by NetBeans - which is doable, but annoying - it's sounds like you tried this, but were unable to get it to work as expected. For NetBeans specific help, you are better posting to a NetBeans forum (though you might be just the second person who has tried to do this with a JavaFX app).
Also need to check the end user experience is acceptable too, because I think the dialog and warning handling for the mixed code situation is different.
Look at the deployment guide section "Using <fx:resources> for Extension Descriptors" - I think it documents how to do what you want if you use a custom build file rather than letting NetBeans do the work:
http://docs.oracle.com/javafx/2/deployment/javafx_ant_task_reference002.htm#CIABGCEE
Hmm, a lot of running around to deploy an app which can open a file . . .

TS3276 I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68

I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68

HI,
The Apple IDs from @mac.com and @me.com (Older MobileMe and more recent iCloud Names) are also Valid AIM Screen names.
Any other sort of Apple ID is not a Valid AIM Name.
A Google ID that is associated with Google Mail Account (And has "Talk" enable on your Google Settings) can be used in iChat as Jabber Name/ID. (Google Run Jabber server).
Jabber and AIM are different IM Services and it is not easy or straight forward to add Buddies from one Service to the Buddy List of another. (As A Starting point consider it "impossible")
iChat 4 and 5 have links to the registration page of @Mac.com here with a "Get an iChat Account" button in the add (Account) screen (You select @mac.com or MobileMe and then press the Button - Choosing AIM and then pressing the button used to lead to the AIM registration page but AIM moved their page).
Apple IDs can be any valid email (or an @mac.com or iCloud registration)
Therefore you could make a Google ID into an Apple ID.
However this will not be a valid AIM Screen Name the way @mac.com or MobileMe/iCloud ones are.
Valid AIM Screen Names in Table (pic)
7:46 PM Monday; December 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have an older IPOD that I'm having trouble getting new purchases on to my IPOD. I use to have a source list on the left hand side of screen where I dragged my purchases to and they downloaded. Can't find place to check manual vs. auto sync.

I have an older IPOD classic that I'm having trouble getting new purchases from library to IPOD. I use to have a IPOD icon in the source list on the left side of the screen. Now that is all gone. My purchases are coming up as recently purchased but can't figure out how to get them transferred to IPOD. I also can't find how to confirm setting is for manual not auto sync as the first computer I had blew up and am now using a different one. I haven't had any of these problems prior to the updates.

G'day Mate,
As an avid flight simmer I bought a new soundcard my previous was
an audigy 2 platinum ex with an external module I really liked but somehow all of a sudden I was getting a screech when using FS9 sor I opted to change to the present. Well stone the crows my soundcard was auto updated with new drivers and well you guessed it the soundcard did not show in the sound video controllers window No I have just joined this forum and it looks like3 you may have the answer for me . I am now going to do as you suggest and see what happens.
I shall return with the outcome of my dilemma.
Many thanks for your sound advice ( pardon the pun)
Pat
Ret'd Viet Vet

Having trouble getting my uploaded cds which are in itunes and working properly to transfer to my iphone, only purchased songs sync

Similar Messages

Maybe you are looking for