Having trouble maintaining remote desktop connection with Mavericks.  What is this about needing RDC 3.7.1 with Mavericks.  I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed.

Having trouble maintaining remote desktop connection with Mavericks.  What is this about needing RDC 3.7.1 with Mavericks.  I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed

Lucky you, it did not work for many users (which as it should be) so MS produced a new version, for ML and Mavericks.
It's in the App Store, for free.
FYI, I assume that you were attempting to post a picture, no one can see it (except maybe you) because it is on your computer rather than the forum server.
file:///Users/dbrant/Desktop/About%20Apple%20Remote%20Desktop%203.7.1.webloc
Use the small camera icon in the editor toolbar to post it.
It also looks like you attempted to use Apple Remote Desktop, which does not do Windows.

Similar Messages

  • Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6". Where can I find it? Thanks for

    Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6“. Where can I find it? Thanks for your answer! Jana

    Prompted to install Java SE 6 Runtime | Mac OS 10.9
    Mylenium

  • HT1386 icannot sync my ipad mini to my laptop computer. whenever i try to sync it, it prompts me to install itunes 10.7, but my problem is i tried to download it to my device but it does not download the application. what should i do? pls. help.

    i can not sync my ipad mini device to my laptop computer. everytime i try to connect my device to my computer, it prompts me that my device need a itunes version 10.7, but whenever i try to download the required version, my device does not download itunes. how can i do it? please help.

    You do realize that the message means that you need to download iTunes on the computer and not on the iPad - correct? I just want to make sure that you know that.
    If that is the problem, go here to download iTunes.
    http://www.apple.com/itunes/

  • I downloaded firefox and it extracts but then does not install.

    I was having some problems with firefox freezing up and "not responding" when I was trying to look at a print preview. I then tried to uninstall firefox but for some reason it was not uninstalling. So I then went in and deleted everything firefox manually. Now when I try to reinstall it is not working. It downloads fine then extracts but after that nothing else shows up. It shows that it is still running in my task manager but nothing is happening.

    Someone please help ASAP. I absolutely hate using IE. I've been using firefox for years and would like to continue using it.

  • Problem Establishing Remote Desktop Connection from Win 7 64Bit

    I just got a new Lenovo laptop running Windows 7 Pro 64 Bit with Service Pack 1. I have installed all Win 7 Updates.
    When I try to connect to other Windows 7 Ultimate (32 bit) desktops through Remote Desktop Connection over my LAN, I get the following error:
    "An authentication error has occurred. The requested security package does not exist"
    I can connect to a Windows Small Business Server 2003 32 bit server from the laptop without problem.
    All machines are members of the same Windows domain.
    The Windows 7 machines I am trying to connect to can connect to each other without issue. NLA is set as not required on each of the desktops, though I have tried turning the NLA setting on, and received the same error.
    I have even tried running the 32 bit version of mstsc.exe and disabling the 64 bit version as discussed here:
    http://www.davidmoore.info/2009/12/02/running-32-bit-remote-desktop-connection-on-windows-64-bit/
    This had no effect either.

    Hi,
    Based on my research, please check whether the value of HKLM\SYSTEM\CurrentControlSet\Control\Lsa\Security Packages is
    kerberos
    msv1_0
    schannel
    wdigest
    tspkg
    pku2u
    If not, please correct it and see how it works.
    Note: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For
    more information about how to back up and restore the registry, please refer to
    How to back up and restore the registry in Windows.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • Trouble with Remote Desktop Connection to work PC

    Note that I am trying to log into my work PC from my mac at home. My company recently announced we could log in from home with a mac into our work PC. they can't get it to work so I thought I'd try here. We use a mobile site on Safari to obtain a network connection - it launches a program called network connection and I appear to have that network connection (although very little data is being sent and received). I am then supposed to launch a program called Remote Desktop Connection (this program was installed from steps I ran through the first time I logged in through the mobile site, it is version 1.0.3), but when I do, it will not connect and the error message is that remote connection is not enabled, network is too busy, etc). However, the guys at the support desk using PCs can log into my work computer. The only info that's mandatory to input on the Remote Desktop Connection is my work computer name. I don't think this is the issue, because if I purposefully use an incorrect name for my work computer, the error message is different, stating it can't find my (work) computer. I also installed the most recent version of Java for 10.3.x The only issues I can think of are a) this won't work with 10.3.9, although I doubt this is it as the Remote Desktop Connection program appears a few years old, OR there is some firewall issue on my mac. I doubt that this is it, as I assume the mac's firewall protections are to prevent others from remotely logging into my mac, not prevent me from using my mac to remotely log into my work PC. Also, I don't use any third party firewall or other protection stuff on my mac other than whatever comes stock. if you've read this far, thanks, and any comments appreciated! am trying to log in using my dual 1.8 g5 with 1.5g memory using 10.3.9

    Are you by any chance with a major retailer? My company just did the same thing. We used to connect via a Virtual Drive connection, but they took that away and went to RDC.
    I had problems at first logging in as well. It was acting as if my password was wrong, but I knew that wasn't the case. I finally typed the password in the UserName area and found the problem!
    I had two special Characters followed by a capital letter. For instance !@Axxxxxxxx. When I typed the password, I would push and hold the 'shift' key for the first three letters. When typing that in the "user name" field, it showed as !2axxxxxxx. You have to release the 'shift' key and repress it for each letter.
    I hope this helps you!

  • Since my Maverick infall, I'm unable to use remote desktop connection, What can I do?

    Since I updated to Maverick, i am unable to cconnct to my job's server through the remote desktop connection.  I know the problem is not at work since I'm able to connect from my apple laptop and other windows computers.  When I try to connect I get an error message stating the terminal session is not supported in my computer.  Can I connect to my office server using Maverik or do I have to revert to Mountain Lion?

    I talked with Apple support they tried having me restart my comp and reinstall intunes. Which did not work and he basically said that I would need to go the apple store and probably have to get a new phone. Thank god I backed everything up first.

  • Easy print not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1

    Easy print is not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1 . Printers dont get redirected when you connect to the terminal server. The server we are connecting to has Windows 2008 server.  On 32 bit Windows
    7 and windows XP clients Easy print is working fine and printers get redirected in terminal server.

    I am having the exact same problem. Windows 7 works fine, but 8.1 will not redirect printers. Others said to check local policy terminal services settings and my setting are all set as they should.
    I think Windows 8.1 is not telling the terminal server what printers it has.

  • Using a remote desktop connection with the Macbook pro.

    I use the remote desktop connection on the Macbook pro and am unable to exchange info between the mac and the remote connetion windows. For example, if I am writing an email from the remote connection and want to attach a document, photo etc. that I created on the Mac, it just doesn't work. It seems like the Mac and the desktop connection are completely seperated eventhough they are both on the screen in front of me. the systems I use for work are not Apple compatible and will not work on anything other than windows explorer and in my case the remote desk top connection. Any ideas!

    Welcome to Apple Discussions
    Try running in 'ClamShell' mode (MacBook Pro lid closed and using an external keyboard and mouse) with the Gateway connected and then run System Preferences/Displays, it should show then ...
    My 1920x1080 monitor shows the following:

  • Remote Desktop Connection Times Out With "Can't Connect" From One Specific Computer Only

    This is an odd one... I manage several servers from this computer. This particular server, 2012 Essentials, won't allow for remote desktop connections to either the server or attached workstations. I can get into the server's remote web page but when I
    attempt a remote desktop connection, it hangs on "Initiating remote connection..." and then times out with the error response that remote desktop can't connect. But... if I attempt the same connections from any other computer, I am able to get in
    and utilize remote desktop. Does this mean that there is a certificate issue with the computer unable to connect and if so, how does one remedy this? Or is it some other issue? I've attempted everything within my technical ability to no avail. Any suggestions
    are greatly appreciated.

    Hi,
    Before going further, would you please let me know the RDC version that used in the problematic computer? Was it the same with other computers?
    Please temporarily disable firewall and then check if this issue can be solved. Based on your current description, it’s hard to say the root reason of this issue.
    So, I suggest that you should check relevant log files and get some clues. It will help us to narrow down and solve your issue.
    Hope this helps.
    Best regards,
    Justin Gu

  • Remote Desktop Connection with single Ethernet cable

    Hi,
    I'd like to be able to use Microsoft's Remote Desktop Connection app to connect to one of my XP machines with my PowerBook. I can do this when everything is running on my home LAN, but I'd like to be able to connect with just a single Ethernet cable connected from my PowerBook's network port to the network card of the XP machine. This would allow me to use the PowerBook as a monitor when I bring the XP machine offsite to run tests (I'm a computer technician). I've played with the Network settings in the System Preferences, but things that would seem to me to work don't work. Any suggestions would be appreciated.
    Thanks,
    Ken

    When you're on the road, and these are the only machines connected to each other, you will either need to configure them to have static IP's in the same subnet
    192.168.0.2 and 192.168.0.3
    255.255.255.0
    no gateway/router IP required.
    THey'll need to be in the same workgroup (but you probably have that already)
    ...or...
    Configure the XP machine to be the DHCP server, and the mac to get IP from XP.
    (first option is probably better.)
    Might need a crossover cable. Might not.

  • Remote Desktop Connection With Custom Certificate on Windows 8.1 fails

    I'm trying to establish a secured remote desktop connection without success.
    The setting
    There are some local pcs with windows 8.1 Pro and windows 7 Pro, no server-edition. I've created a self signed ca-certificate with openssl for Windows. I used this to sign custom certs for the local windows-pcs, which are installed at mmc -> certificate
    snap-in for local computer -> My Certificates -> Certificates. The networkdriver has the right to read the key. The sha1-fingerprint of the custom signed certs are registered at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp
    -> SSLCertificateSHA1Hash = sha-1 hash of the custom local cert. Additionally the revocation-list is restrained to the local list by setting HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Credssp -> UseCachedCRLOnlyAndIgnoreRevocationUnknownErrors
    = 1.
    The results
    The connection form win 8.1 to win 7 works. The connection info confirms that it is a veryfied connection. The connection to windows 8.1 fails after entering the credentials with error: No connection possible. Network Level Authentication is set, but other
    level don't work as well. The log (Event Views -> Applications and Services Logs -> Microsoft -> Windows -> TerminalServices-RemoteConnectionManager -> Admin) says "Remote Desktop Services has taken too long to load the user configuration
    from server" and "The Local Security Authority Cannot Be Contacted" (error 0x80090304)
    Aditional information
    The connection via linux (remmina) works for win 7 and win 8.1, but I have no information about the encryption. It is the same with the Microsoft Remote Desktop Tool for Android.
    Maybe it is accociatet with a different cert handling by Windows 8.1 but I couldn't find further information or a solution in the internet.
    Best regards
    abditus

    I solved the problem!
    The default openssl certificate signature algorithm is md5RSA but it doesn't work with windows 8.1.
    It is at least sha1RSA needed.
    By adding "default_md = sha1" to the openssl.cnf you create certs with sha1RSA and it works fine.
    Beste Gegards
    abditus

  • Remote Desktop Connection with WRT54G from Novice

    Well, I’m usually pretty good at using Google and forums to eventually figure out how to fix my problem but this one absolutely has me stumped and I’m hoping someone out there has an answer for me. For the record, I have probably a beginner/intermediate knowledge of computers so if you know the answer to my problem, try to explain it simply! ****TO ANYONE WHO TAKES THE TIME TO READ THIS THING AND CAN OFFER SOME ADVICE-THANK YOU!!!!***
    THE PROBLEM
    I would like to be able to use Remote Desktop to log into either of my home computers from basically any computer on the internet.
    THE SETUP
    I have two computers, whose names are LAPTOP and DESKTOP that are both running Windows Vista Ultimate. Both of the computers are connected to a Linksys WRt54G Router ; one wired, the other wirelessly. The Linksys router is then connected to a Westell DSL Modem that connects to AT&T’s internet service.
    SETTINGS
    My DSL service only provides me with a dynamic IP address so I signed up with no-ip.com. Through that site, I bought a domain name and downloaded their small program that runs in the background of my desktop computer. The program checks what my IP address is every couple of seconds and if it changes, it notifies their server so that anyone who types in my domain name is directed to the new IP address.
    ROUTER (Firmware 4.20.6)
    Basic Setup Page: The Router Name is just the model number, the Server Name is my DSL provider and the Domain Name is the name I chose and registered with No-IP.com. (www.mydomainname.com, for example.) DHCP Server is ENABLED. DDNS Service is DISABLED. Under Advanced  Routing, it is set in GATEWAY mode.
    Security Page: Firewall Protection is ENABLED. Block Anonymous Internet Requests is NOT checked. Filter Multicast, Filter Internet NAT Redirection and Filter IDENT ARE checked.
    Applications and Gaming Page: I chose two port numbers, one for each computer that I want to connect to. On the first line, I have Application: RDP, Port Range: 49200 to 49200, Protocol: Both, IP Address (The IP address of the computer I want to connect to) and the Enable box IS checked. [I did the same thing with the second line for the other computer, but with a different port number and that computer’s IP address)
    Administration Page: Access Server is HTTP, Wireless Access Web is ENABLED, Remote Management is ENABLED through Port 8080, and UPnP is ENABLED.
    WINDOWS VISTA SETTINGS
    First, I went to the Remote Desktop Settings of the target computer and ENABLED Remote Desktop Connection and allowed computers running any version of Windows. I also confirmed that the box labeled “Allow This Computer To Be Controlled Remotely” WAS checked. I then made sure that I had a user name, it had a password associated and that it had Administrator priveledges. I went back to the Remote Connections screen and added the user name as being allowed to connect. (I think this is redundant since it’s both the owner of the computer and has Administrator Status.)
    Next, per Randomly Googled Internet Advice, I went into the registry and changed the port number that Remote Desktop listens for incoming connections to Port 49200 to match the router settings. [Registry Entry that I modified was: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp]
    Finally, I went to the Windows Firewall and Added (opened) port 49200 for use as a Remote Connection. I kept the protocol as TCP and confirmed the scope was set for Any Computer.
    CURRENT STATUS
    If I go to Explorer and enter my IP address with a colon and the specify port 8080, I can get the login screen for the router. Same thing happens if I just enter my domain name and port 8080. However, if I switch the 8080 port and use one of the ports I chose (49200), it cannot connect, either using the Public IP address or the domain name. (I’m trying to connect using a wireless card and not connected to my local network so I know it’s the same as if I was anywhere else.)
    I’m not sure why it won’t let me connect; it feels like the router will not allow the connection to pass through it to the port I’m asking it to forward to. I’m guessing someone out there who took the time to read it is shaking their head at all the information I provided and knows the one dumb thing I missed!
    Thanks again!

    I'm attempting to do the same thing with my home network. the only differences are that i have cable internet from comcast and i'm running vista business. my router is the wrt54gs. i'm assuming that the web page is similar for adjustmants. To be honest i cannot figure out how to do a remote destop too. so i went to www.logmein.com and installed the program. once installed to to every computer you want to have access too and log into the website. then click on the add computer icom. full control app sharing etc... even better when you connect you have the option to deactivate the local host mouse and screen to prevent anyone seeing what your doing.
    If you resolve the router issue would you let me know. plz thanks
    Forest

  • Trouble Printing to Network Printer via Remote Desktop Connection

    Specs:
    Macbook Pro, early 2013,
    Mavericks (10.9.2),
    Microsoft Remote Desktop Connection v.8.0.5 (latest),
    Connecting to Windows Server 2008 standard
    Printer, HP LaserJet P2035n, connected via the network
    When on the Mac connected to the server, the printers from the Mac are redirected so you're supposed to be able to print from Remote Desktop to the HP printer.  However, when you select something to print, the job goes to the print and keeps printing over and over and over again until you cancel the print job, which it usually allows you to do, or turn off the printer, which you have to do when it won't let you cancel the job.
    Any advice on how to get the printer connection running normally?

    What you haven't told us is what method you use to connect/setup the printer on Windows. There are two ways - Bonjour for Windows (free software from Apple), and TCP/IP raw port 9100. If you have a problem using one, try the other.

  • L7580 net printer driver disappearing in Win 7-62 after connecting with Remote Desktop Connection

    I have an Officejet Pro L7580 connected via ethernet. I've been using the driver released from Jan 2010, and whenever I connect to my Windows 7 Ultimate 64 computer via Remote Desktop Connection, the printer drivers for both the printer and the fax disappear. I have to constantly run the "add a device" window to add the printers back again. 
    Why do they disappear like that?
    Fishanderson

    OK after updating the Server and clients I am still having this issue :( 
    and just today after no sound problems for 6 days the sound dropped out on a couple of RDP sessions, yet the sound on the client itself worked fine when tested (minimise the RDP session).
    It took the RDP sessions to be restarted to restore the sound within the session.
    I have found similar (old) thread regarding this problem:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/958fd891-6f55-432b-8268-a326ac6b2b2e/sound-in-remote-desktop-session-stops-working
    but no one has informed about if as solution was ever found.

Maybe you are looking for