Having trouble opening camera raw files. Already downloaded Camera Raw Update for Photoshop CS5. I have a pc.

Please Help? Having trouble opening camera raw files. Already downloaded Camera Raw update. I have a pc.

If the camera is fairly new then the version of ACR you have with CS5 won't be able to read those file. You'll need to upgrade to a newer version of Photoshop or use Lightroom 5.
Once a new version of Photoshop comes out Adobe does not support updating ACR from the older version of PS.

Similar Messages

  • What RAW file converter download do I need for Photoshop CS5.1?

    What RAW file converter download do I need for Photoshop CS5.1?

    Camera Raw 6.7 is the last version you can use.

  • I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

    I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

    Try installing it manually from:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
    Regards,
    Ashutosh

  • How can I get the updates for Photoshop CS5 to download to my new Macbook Pro where I have already installed CS5 from my original disk? I have tried many times over 2 days. I was able to successfully download the current version of Adobe DNG converter.

    How can I get updates for Photoshop CS5 to download to my new Mac book pro where CS5 is already installed from my original disk? I have tried many times over 2 days. I get the same error messages re downloading error. I successfully downloaded the current version of Adobe DNG Converter & it installed perfectly. Help please!

    The Adobe auto updater is highly unreliable.
    You need to look for and download the update yourself and then manually apply it as per the detailed instructions on the download page:
    Adobe - Photoshop : For Macintosh
    ~~~~~~~~~~~~~~~~~~~~~~
    Please note that the Adobe Camera Raw plug-in must be updated separately, after you have updated Photoshop:
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

  • Having issues opening raw files from Canon 5D Mark iii in Photoshop CS5

    I cannot open RAW files from a Canon 5D Mark III in Photoshop CS5. I get an error saying "
    Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information."
    Documentation seems to be no help.
    Any ideas?

    You can download the updates manually and try to install them Adobe - Photoshop : For Macintosh
    If you can not get CS5 updated you may want to consider  Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Search Results
    1 (800) 833-6687Adobe Systems, Customer service

  • Having trouble opening content code file with code apple sent me

    purchased apple computer in july, apple emailed  code to open content code file to upgrade to moutain lion. Code is not being accepted. Anybody else having this problem?

    We are having the exact same issue, has anyone resolved this yet?

  • "Use RAW files with external editor" greyed out for Photoshop CS2?

    I've just upgraded from iPhoto 5, and the "Use RAW files with external editor" option in the advanced preferences is greyed out when I select Photoshop CS2 as my external editor (back in the General pane).
    It works fine when Preview.app is selected. I can understand that pre-CS2 Photoshop wouldn't be available, but CS2 is capable of editing RAW images.
    Has anyone been able to get iPhoto 6 to send a RAW image to Photoshop CS2 using this preference? I've written an Applescript to do it in iPhoto 5, but I'd rather use something cleaner...
    15" PowerBook G4   Mac OS X (10.4.4)  

    Works great with Photoshop Elements, opens with Camera Raw. The issue is you can't save it so that iPhoto gets the changes.
    You have to save it and then re-import. I tried all permutations of saving it in originals and modified folders in the library. No luck. The only thing I didn't try is to save it as a jpeg over the top of the full sized one iPhoto created on import.

  • Update for photoshop cs5 not working, deletes files before installl happens

    My computer crashed, so I rebuilt it.  I installed photoshop CS5 with no errors.  I go to update it and it downloads without any problems.  Then when it goes to install it errors out.  I found that just as one part of the update is 100% downloaded, it is deleted.  And this happens for each and every part of the update, so when it goes to install the updates, there is no files to do that with. 

    I went to that web site and downloaded those files.  And what happens?  Most of the files extract without any problem, but the one that errror out on every single one I downloaded was the AdobepatchInstaller.exe.  I have 2 computer and tried it on both computers and both said the same thing.  When it does extract it, it says it is corrept.  So now how is that my computers fault????

  • Having trouble opening Crystal Report files from a document library

    I am trying to open Crystal Report .rpt files from a document library in either the native, client Crystal Reports software or in Crystal Reports Viewer. When I add the Crystal Report files to a document library and attempt to open them SharePoint displays
    a prompt asking me to save the file locally instead of opening the file. I have done a lot of research online and found several sites discussing similar scenarios, however, I have not been able to get these solutions to work. Here is a short list of sites
    I have referenced for possible solutions:
    http://naadydev.blogspot.com/2013/03/crystal-report-viewer-sharepoint-2010.html?showComment=1383339860122
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/52aabf2d-10dc-424c-bd50-124fc972a9b9/crystal-report-viewer-integration-with-sharepoint-2010?forum=sharepointgeneralprevious
    http://www.codeproject.com/Articles/42731/Crystal-Reports-WebPart-for-SharePoint
    Here are the steps I have done to try to get the .rpt files to open:
    Added the Crystal Report extension .rpt as a MIME type
    Installed the Visual Studio 2012 Crystal Reports Viewer toolbar
    Installed the 64-bit Crystal Reports runtime
    I have also created a solution file based off the Code Project site which partially works, but not quite right. In this project I have created a document library called "Crystal Reports rpt Files" and deployed the solution file to a site. When
    I open the Web Part Maintenance Toolbar I can see the selected .rpt file in the drop-down, but no Crystal Report file is displayed on the page itself.
    I am not sure what I am doing wrong. Does anyone have experience working with Crystal Reports and SharePoint 2013 (or earlier versions) that could lend some advice?
    Thank you,
    Alex

    We are having the exact same issue, has anyone resolved this yet?

  • Can't download updates for Photoshop CS5

    I keep getting updates for photoshop CS5 but when I try to upload I get a message saying there was an error - please quit and try again. I do quit and try again and the same thing happens. What should I do next?

    Adobe - Photoshop : For Windows
    Adobe - Photoshop : For Macintosh

  • Having trouble opening cd file?

    Having trouble opening a CD file in adobeAIRinstaller.exe, any suggestions?
    Thanks in advance

    Suggest you try another forum. Not sure which one.

  • Trouble opening an autorecovered file

    Hi,
    I am having trouble opening an autorecovered file. It is an ASD file but when I try to open it using Word, I get an "unsupported file" error message. I tried to copy it and open it elsewhere, but cannot open it.
    Thanks!

    Try to open and repair the ASD format file through Word File > Open > Computer > Open and repair
    If it still doesn't work, it means the ASD file is also corrupted. Try the suggestion in the following article:
    http://support.microsoft.com/kb/316951/en-us
    Tony Chen
    TechNet Community Support

  • Updates for photoshop will not work/wont open raw images

    I have tried to update my photoshop and numerous times to open raw images in photoshop and it wont work, everytime i try to do it the installation fails and doesnt explain why and example is :
      Adobe Bridge CS5 4.0.4 Update
      Installation failed
      Adobe Device Central CS5.0.1
      Installation failed
      Photoshop 12.0.2 update for Photoshop CS5
      Installation failed
      Photoshop Camera Raw 6.3 Update
      Installation failed
    can anyone help?

    Might be helpful if there are any more specific messages being shown to list them.
    Just passing on what I've read:  Some people using PCs have reported that removing Photoshop, reinstalling from their original media, then updating to the very latest works where they haven't been able to get the software updated via the integrated process.  I don't know whether this applies to Mac, but it could represent something to try if you run out of options.
    But before trying that, have you tried doing a manual installation of the latest updates?  You can download the appropriate one(s) directly from the following:
    http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh
    http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
    -Noel

  • I am having trouble opening .nef raw files from a nikon d800 in elements 9.

    I am having trouble opening .nef raw files from a nikon d800 in elements 9.
    I have tried to update ACR to the latest version but can not tell if this has been successful
    I just get the message "wrong type of file"

    For the D800 you have two alternatives:
    (1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
    Windows download click here DNG Converter 7.3
    Mac download click here DNG Converter 7.3
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

    I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

    Either use 'SYLKPIX Developer Studio SE' to develope the RAW files and to save them in another lossless format like TIFF, or try if Adobe's free DNG Coverter can convert your Lumix RAW files to dng. Then import the dngs. This way, your files will still be RAW files.  This works (most times) for my Lumix FZ28.
    Adobe DNG Converter 8.3  http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695

Maybe you are looking for