Having trouble reconnecting media

Hi,
I recently had to upgrade my internal RAID, in favor of some larger drives. I now have three 1T drives, striped as my media scratch disk. So I backed up the entire drive. Removed the old drives, put in new ones, and am now in the process of reconnecting everything. With an exact copy of the last drive, if I simply click and drag what was there, will my Color projects open as before?

I fear it is something along those lines. I did set the default directory back to where I had it before. Final cut pro works fine, but Color just doesn't wanna do it.

Similar Messages

Anyone else having trouble with media import in 10.2?

I am having trouble importing media from a camera SD drive. It lets me see the file, but is not importing. When I select import nothing happens.

David, I found a work around. I use a Canon XA10 and usually can just pull the SD card from it, plug in to my Macbook pro and download the file(s) I need. Not quite sure why it never downloaded last time. I opened the file I needed and saved it to the hard drive and accessed it just fine. Probably just a glitch, but wondered if this was an issue with the new 10.2. Will have to see if the problem continues to recur.

Having trouble ingesting media- Prelude gives error message

In Adobe Prelude, everytime I click on "Ingest Media" or go to File---Ingest Media, I get an error message that says that Adobe Prelude has encountered a serious error and needs to shut down.

The trouble I am having is when I am on the computer, logged in to MyVerizon. I use my hotspot to connect to the internet via my computer. My phone is an LG Enact. I have had other problems with the cloud. it is extremely frustrating, as my business depends on these photos. I must be able to download them onto my computer.
Thanks so much for the help!
Sally Smith
Sally A. Smith

Having trouble reconnecting render files

Hi-
I recently had to move a project from one hard drive to another, and although all the files are relatively in the same hierarchy (only the drive itself has changed) when I load the project in it shows almost the entire timeline needing rendering, both audio and video. When they were on the original drive, the entire project was rendered and it was completely done. Now when I look in my audio render folder and it seems that the render files are all split up in three separate project files... as time went on I would "save as" in order to have permanent backups, so maybe FCP is "confused" as to which of those subfolders each audio render file is in. The video render folder is similar, spread out in two different subfolders. So it looks like my render files are split among two folders in video render, and three folders in audio render. FCP never had any trouble with this arrangement before, keeping track fine.
When I select "reconnect" from the menu, "render files" is ghosted... it won't even let me select it. Am I really going to have to re-render everything to get my project back just because the files were moved to another drive?
Or could I try putting all the render files in one drive (move them up a level and out of the subdividing folders). Would that help FCP "find" them to reconnect with them? I'd backup the entire render file folders first in case it didn't work.
Thanks!
Leslie Bell

I'd not change project file names mid stream... it's really best to backup OFF the computer too. A USB flash drive works really well for this... When you change project names, and capture or render, the files get put into new folders named the same as the new project file's name... sort of messy.
You can put a flash drive in a USB port, and each day, just drag your project file to it, replacing the old... that way no matter what happens to your computer, the project file will not be affected.
Jerry

Having trouble accessing media in Verizon Cloud. Any tips??

For the past month, I have been unable to download the pictures backed up via Backup assistant. When they actually come up, they are NOT in chronological order. That's a pain, but the bigger problem is that, every time I try to download a photo, I get an error message that all servers are busy. So, I have NO ACCESS to these photos! help!!!!

The trouble I am having is when I am on the computer, logged in to MyVerizon. I use my hotspot to connect to the internet via my computer. My phone is an LG Enact. I have had other problems with the cloud. it is extremely frustrating, as my business depends on these photos. I must be able to download them onto my computer.
Thanks so much for the help!
Sally Smith
Sally A. Smith

Having troubles with Media Encoder CS6

Hello,
I am having the issue with Media Encoder where the it tries to connect to the dynamic link server for a long time and then ultimately fails with the message Could not read from the source. Please check if it has moved or been deleted. I have so far tried everything that I found online so far, that being uninstall and reinstall and creating the Premier shortcut in the Program Files (x86)\Common Files\Adobe\dynamiclink directory but nothing has worked. I am queuing the job from Premiere Pro CS6. I am not sure where to go from here and really need some help. This is on a Windows 7 machine. Thanks.

There are several different ways to add a Premiere sequence to AME, see if either of these alternative methods work for you:
Opt 1) Save your Premiere project, then drag your sequence from Premiere's Project panel and drop it into AME's Queue panel.
Opt 2) Quit Premiere but leave AME running. Drag your Premiere project file from the desktop (or wherever you've saved it) and drop it into AME's Queue panel. You should see an import dialog asking you to choose the sequence you want to import.

Wifi having trouble reconnecting

I just bought a Lenovo Idead V570. The Wifi works fine however, when I re-activate the computer it has problems reconnecting to the WiFi router - it tries for a long time and then gives up. I end up having Windows 7 fix the problems with the troubleshooter and that gets it runnign. But it gets annoying. Any ideas on how to fix this? Thanks

I just bought a Lenovo Idead V570. The Wifi works fine however, when I re-activate the computer it has problems reconnecting to the WiFi router - it tries for a long time and then gives up. I end up having Windows 7 fix the problems with the troubleshooter and that gets it runnign. But it gets annoying. Any ideas on how to fix this? Thanks

Seemingly unnecessarily having to reconnect media.

Hello All,
Back in the saddle once again, without the fear of being tossed to the ground by the FCP Bull.
I have been using the a G-Technology drive to travel from work to home. The transfer (copying) to the G-Drive works fine. When I get home, there's no problem opening the files and continuing my work.
The problem/challenge comes when I return to work. I seem to have to reconnect many files, which is a very time consuming (read frustrating) experience. I imagine that I'm doing something wrong when I get back to work and want to copy back to the MacBook (LaCie External Drive).
Without greater detail, is there something I should keep in mind?
Thanks.
DG

If you keep your files well organized, ie all media files in your capture folder it should be easier to reconnect. you might want to maintain the project file on that firewire drive as well. open the project file from the one you keep on the firewire drive when you get to either the home or the office. when I used to take work home I'd work this way and didn't have to relink. I made a folder on each the home and work machine to keep a backup that i'd drag from the firewire drive and the end of my session, then append a date to the file name to keep up with what was goin on. I always had a project backup, and I'd backup any files created that couldn't be captured from tape in the event of a disaster. I had a couple of disasters but was able to recover at least the latest work. If you have to rent a deck to capture buy a drive to hold the captures as a backup.

Having troubles exporting media

Hello everybody,
I'm new to this forum and new to Premiere Pro.
I'm experiencing a problem with export setting.
My original video is 1008*600, recorded from my desktop with a desktop recorder. The FPR is 20. I created a project based on this video size, but I couldn't change the FPR to 20, only 23.xxx. I Don't know if it's 1by1 or 1by1.33 or such.
When I try to export the video, I get in all settings case my titles very good looking, but the original video is so bad. I cannot read the text on the video though the original video, in Media Player, is quite clear and easy to read.
Could someone tell me where is my fault? What should I be checking for?
Thanks a lot for reading trough the end,
Oliver

Thanks for your response.
Actually, I tried to change some settings in order to have the video the way I wanted and I could found a good settings using this:
Format : H.264
Preset: Custom
In Video settings:
TV Standart : NTSC
Frame Width : 1008 * 640
Frame Rate : 15
Field Order: Lower
Pixel Aspect Ratio: Square Pixels
Profile: High
Level: 3.1
... This givre me a good quality in the Output previous screen (it did not with the other settings) but it keep on exporting a very bad video. As I said, the Title ate okay but the background video is awfull.
If someone could help me with this...]
Olivier

I have been having trouble getting my email on my iPad. It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it. I can send emails, but can't get them

I have been having trouble getting my email on my iPad2.
It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it.
I can send emails, but can't get them.
Any ideas, people?

Hi Kharels
Just posted this reply to 2 others with same sort of question:
I have the same issue as i have my own email address and only want to use.
There are two ways around this annoying problem. The first is to set up your own domain email account alongside your iCloud one, and when you go to send each email tap on From and you get a choice of emails addresses to reply from... ie your own domain or the iCloud one. This is tedious though.
The other is to set up your iCloud email as normal, then create a new one altogether. Choose 'Other' when creating this new account. Then put for the incoming server mail.me.com, along with your user name and password. For the outgoing server put the server you want to use - ie your own domain one. This is therefore a hybrid account and does work.
Now switch off the email for iCloud (leaving on Calendar, Address Book etc). Switch on the email for your hybrid account (which of course is iCloud incoming as well).
Providing you have directed your own domain email address to your me.com one, you will find the iPhone should behave itself and you can use the folders etc and these will synch with your Mac ok.
Hope this work for you - let us know.
Simon

I am having trouble transfering any media from my windows 7 pc to my iPad 3. Currently using the latest version of iTunes n my windows pc but still the media won't appear on my devicewhen being transferred..

I am having trouble transfering any media from my windows 7 pc to my iPad 3. Currently using the latest version of iTunes n my windows pc but still the media won't appear on my devicewhen being transferred..

The window would open and I would get the hourglass cursor suggesting something was happening, but the Apple home page (default from the install) would not load, nor would any other page I tried (google, yahoo, cnn).
Even though it's about a different application, I'd try the following document with that:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
(Safari uses the same webkit engine to render web pages as iTunes uses to render the Store pages. So an issue that can cause the iTunes Store to blank can also cause a Safari for Windows application on the same PC to produce blank pages.)

I am having trouble getting Flash media to play on my Hubpages

I am having trouble getting Flash media to play on my Hubpages website - http://everydaygreen.hubpages.com - and am wondering if it can be used on this particular web service or if it is blocked by some of their script. Any help would be appreciated.
Thanks,
Trish

Trisha,
Thanks for your reply. This forum is for issues with the Edge Code getting started tutorial. For issues with Flash Player, you may want to try the Flash Player forum at http://forums.adobe.com/community/flashplayer
- Brian

HT3887 Having trouble connecting blutooth on my laptop. Devices are paired but it says "not connected". I've gone thru System Pref. with no luck. Can anyone give me step by step help to reconnect BLUETOOTH? plz, ty

Having trouble connecting blutooth on my laptop. Devices are paired but it says "not connected". I've gone thru System Pref. with no luck. Can anyone give me step by step help to reconnect BLUETOOTH? plz, ty

Hi:
There are no dumb questions...answers, yes, but not questions. Sometime I use acronyms and forget that I should explain things a bit more.
Resetting those two things sometimes helps and cannot hurt.
SMC=system management controller:
http://support.apple.com/kb/HT3964
PRAM=parameter random-access memory:
http://support.apple.com/kb/PH4405
If that does not help, delete the phone from your computer (system preferences>Bluetooth), restart, and then add it back in:
http://support.apple.com/kb/PH3660
Barry
P.S. If everything fails and you are near an Apple store, make an appointment with a "genius" and take the devices in for them to assist.

Trouble reconnecting XDCam HD media to FCP

I am trying to automatically reconnect media that has been deleted from capture drive. Original media is on an XDCam disc,(imported using XDCam transfer plugin) but FCP will only let me reconnect it by manually locating the files. I have searched and others seem to have the same issue - has anyone come up w/ a simple solution.
Thanks

Hey Shane, time to take the red pill I think mate
According to this thread, our OP is using XDCAM HD not XDCAM EX. He used Sony's XDCAM Transfer application (PDZK-P1) and did not use FCP's Log and Transfer interface together with Sony's XDCAM EX Log and Transfer plugin, (PDZK-LT1), as the the latter is only currently compatible with XDCAM EX media.
Nick
FCP allows you to set a Capture Scratch directory but it does not limit you to only using that directory, the application is perfectly happy accessing your media from outside the defined Capture Scratch directory, indeed from wherever you may choose to store it, but obviously it is a good idea that you keep media in locations that are suitable for media storage and playback, and obviously its best you keep your media in an organized manner.
Sony's XDCAM Transfer app does not have access to FCP's preferences data and so cannot know which directory you have set as your Capture Scratch within FCP. So if you originally imported your footage using Sony's XDCAM Transfer app then it would not naturally have been in FCP's Capture Scratch directory anyway unless a) you set that directory as XDCAM Transfer's Import location, or b) you moved the imported media there after the fact. You can set up your preference for XDCAM Transfer's Import Location, in the XDCAM Transfer > Preferences >> Import tab ... by default it is set to your OS X user account's Movies folder.
Now that you are reimporting/have reimported the media (again using Sony's XDCAM Transfer app) you have the same option to set the Import location according to your FCP Capture Scratch directory, or to move the footage there after the fact ... either way, whether you do our you don't, FCP itself will not care as long as the media resides in a suitable media storage and playback location.
Hope that helps
Andy

I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. right now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service" any ideas on what i shud do?

I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. initially itunes would let me go so far as downloadin the new software then an error poped up as soon as the download finished, and now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service, reconnect or try again later" any ideas on what i shud do?

Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore

Having trouble reconnecting media

Similar Messages

Maybe you are looking for