Having trouble recording a video using Presenter 9, inside PoswerPoint installed as part of MS Office 10, PP version is 14...

The Presenter add in opens up just fine.  I can do most everything with the Presenter tool bar, including recording and publishing audio for the slides, but I get an error message when trying to use the "Video" recording function.  I have a screen shot of the error message if that would help,   But is basically says the "Application encountered and internal Error.  If the error persists, contact someone."  Adobe support is useless on this issue.  Does anyone have any ideas? 
I DO NOT have two monitors set up and the button labeled "Use Presenter View" is unchecked.

Check that your video drivers are up to date.

Similar Messages

  • Recently I am having trouble viewing some videos on Yahoo using Safari 5.1.1 on MacBook Pro 10.6.8. I am not finding a solution on internet.

    Recently I am having trouble viewing some videos on Yahoo using Safari 5.1.1 on PowerbookPro 10.6.8. I am not finding a solution on internet.

    An example link & a clear description of the trouble will help.

  • I just got a used Canon ZR850 and I'm having trouble downloading my video onto my Windows 7 computer

    I just got a used Canon ZR850 and I'm having trouble downloading my video onto my Windows 7 computer. I have a FireWire that works fine with my ZR830 but not with the 850.  The connection isn't registering.  What can I do?

    Without proper system information and other details nobody can help you. and this error means what it says - some other install process is still active, even if it may not do so visible. Could be a silent update of a virus scanner or something, could be a botched install of another program, not even specifically Adobe. As a start, always reboot your computer and then try again. For anything else we need much more info.
    Mylenium

  • I am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

    i am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

    Looking up your camera online, I found it is capable of 1920 x 1080 Full HD 60p Recording. It's the 60p (60 frames per second Progressive) that's the problem I think. iMovie '11 will do 60i (Interlaced). You might need to convert it from the format the camera currently uses into another format to get it into iMovie. Read more about it on this link here: How to import 60p footage From that message thread comes the recommendation to use ClipWrap to convert the camera's video clips now that they are in 60p:
    Tom Wolsky
    Re: How to import 60p footage 
    Aug 17, 2011 12:40 PM (in response to ptburnett68)
    Use ClipWrap to rewrap to QuickTime. Import the files. Edit in either 59.94 or 29.97. The latter if you want to use the high frame rate for slomo

  • Video Pixelation occurs while recording the video using flash player

    Hello,
    I am recording the video using flash player 9 ( using the
    flash media server 2.0 on the back end). Everything used to work
    fine in the past. The quality of the flv video was good. Now
    suddently, I have started seeing the pixelation in the recorded
    video (very poor video quality). Nothing has been changed in the
    code. However on the server side, I am not very sure if there is
    any windows update has taken place and have caused the problem with
    the codec on server.
    However my understanding is that when we record the video
    then flash player use its own codec not the flash media server.
    Can any one help me on how I can get rid of pixelation
    issues?
    Thanks for your help.
    Best Regards
    Pradeep

    Hello Melissa,
    I might not be understanding the question right, but if you
    are using Flash
    Player 6, and the Flash Player 6 video player component, you
    can resize the
    video by resizing the component on the stage (just drag and
    make it larger).
    Let me know if that works for you.
    Jesse H.
    Adobe Community Expert
    My site:
    http://www.jharding.com
    Free Blog Radio:
    http://www.tornadostream.com
    > I'm streaming video using Flash Player 6. The problem I
    am having is
    > that the
    > video will only play at a super small size, something
    like 180 x 60
    > (that's a
    > guess). Is there a way to play the video at the 320
    width that I
    > redered it as?
    > I'm using Flash Player 6 because some code that came
    with my
    > purchased Flash
    > Template does not work unless it's published to Flash
    Plaey 6.
    > Thanks in advance!

  • I am having trouble rendering a video in After Effects CS6

    I am having trouble rendering a video in After Effects CS6. My video is only 12 seconds long. I am using the "Ray-Trace" feature". Whenever I try to render this video I get this error message.
    Also, the text turns into a giant black boxy blob whenever I turn off the Ray-Trace effect.
    Somebody please help

    That's a question for the Adobe forums.

  • Having trouble with internet connections using my Apple G5. Updates turn out to be incompatible with my system. What should I do short of trashing the wonderful computer and spending cash I don't have on a new iMac?

    Having trouble with internet connections using my Apple G5 OSX 10.4.11. Attempts to upgrade FireFox or Safari results in being incompatible with with this system. Tried to locate earlier versions to replace upgraded incompatible software only to find that problems have worsened with crashing results. What should I do short of trashing this wonderful G5 and purchasing a new iMac which I really can't afford?
    Chuck's Dilema

    Hi Chuck,
    TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
    http://www.floodgap.com/software/tenfourfox/
    I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
    SeaMonkey seems pretty fast also, with many options...
    http://www.seamonkey-project.org/
    http://www.seamonkey-project.org/releases/
    Might also look into iCab & OmniWeb versions.
    Also...
    The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
    Texas Mac Man's Flash hack/post...
    https://discussions.apple.com/thread/3599648?tstart=0
    Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
    Might be later ones around also... saw 11.3 I think.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    See in each Browser which version of Flash it thinks it has...
    http://kb2.adobe.com/cps/155/tn_15507.html

  • Having trouble Audio and Video Syncing on iTune

    Having trouble Audio and Video Syncing on iTune anyone know how to repair?

    Here are two suggestions:
    If everything is pretty much in sync until 17 minutes in, do a re sync every ten minutes.  This should ensure that, even if the sync drifts by a few frames over 10 mins, the video will not seem distinctly out of sync at any time.
    Another approach would be to do an overall re-sync in QuickTime Pro (which I believe is part of the FCP package).
    You would need to use QTPro to trim,the video file to remove any surplus seconds of material at the beginning and end.  Then open the audio file in QT Pro and trim that if necessary.  It may be a slightly more complicated to do this at the beginning because, if the audio does not come in immediately, you'll need to make sure that you have the right amount of silence at the start of the file to match the video before the audio begins. This should leave you with video and audio files of the same length.
    Then, in the drop menus of your QT, select and copy the audio track.  Switching to the QT video file, in the drop down menus, click on add track. 
    Hope one or other of these May be some help to you.

  • I am having trouble, my icloud is using an old Apple ID, and i can no longer access that email account, or know the password to that, how do i switch it?

    I am having trouble, my icloud is using an old Apple ID, and i can no longer access that email account, or know the password to that, how do i switch it to my new Apple ID?

    Having the email address is not necessary. It is just the username for the device. All you need is that Apple ID and password. Now, if you forgotten the password, then you have more work to do. Since that email is no longer active, you would need to send the reset to your rescue email, if you remember that. Or you will need to contact Apple Security for help. Apple ID: Contacting Apple for help with Apple ID account security

  • I am having trouble looking at video podcasts on my ipod touch. they are all greyed out. I have tried removing them and resyncing. this did not work. any ides?

    I am having trouble looking at video podcasts on my ipod touch. they are all greyed out. I have tried removing them and resyncing. this did not work. any ideas?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all media and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Blackberry having trouble playing youtube videos

    I own a blackberry curve 8530 and its having trouble playing youtube videos. It plays youtube videos up to 59 seconds and then it stops. It gives me the same error message saying:
    "An error has occured attempting to play the media".
    I have tried turning on and off my phone, pressing alt+enter+del, and doing the battery pull. None of those methods have worked.
    Has anyone had this problem, and if so, how did you fix it? Ive pretty much have tried everything i could think of and none of the forums seems to have a solution.
    Is the phone the problem or is youtube?
    If you know of the solution, your help will be greatly appreciated.

    Hello hashbrown602,
    The following post by Cory from the Inside BlackBerry Help Blog outlines a few steps you can try to successfully play videos from YouTube.
    http://helpblog.blackberry.com/2011/03/watch-youtu​be-on-blackberry/
    If you still have issues after going through each of the steps, you may want to contact your wireless service provider to check your data plan settings.
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • [SOLVED] Having trouble making QT apps use GTK theme

    Hello everyone, I'm having trouble making QT apps use my GTK theme in openbox.
    Some apps seem to work just fine but others don't.
    ^Such as above, as you can see VLC is working, as is qtconfig, but k9copy and k3b are not.
    I've did the suggestions that are listed in the wiki. (http://tinyurl.com/ybhb7yr)
    And even rebooted after I did them, still no go.
    My .gtkrc-2.0 file simply contains:
    gtk-theme-name="Clearlooks_blackblue"
    gtk-icon-theme-name="Tango"
    Does anyone have any ideas why it's not working with k9copy and k3b/how to fix it?
    Thanks.
    Last edited by tgblb (2010-03-22 02:39:31)

    anonymous_user wrote:k9copy and k3b are KDE apps not Qt.
    Yes, but don't they use QT?
    And if not, what do they use? lol. And is there anyway to make them use my GTK theme?

  • Having trouble transfering a video onto the regular ipod

    im having trouble putting a video on my ipod. i tried to transfer it, but it said it wasnt able to be played on the ipod. please give me a reply.
    thank you

    Check that your video drivers are up to date.

  • Having trouble with the video function..

    I just purchased the 60GB ipod photo. I'm transferring music files easily. However, I'm having trouble with the video function. I've loaded Itunes 6, reloaded the original setup disk, and have loaded the latest updates for the unit. I can download movies from the itunes store and save them to my library, but I cant seem to transfer the video files to the ipod. Ive reinstalled itunes and the update 6 with no success. After syncing the ipod it only shows the music files even after all that Ive tried. Additionally, there is no evidence of the video function on the main menu after the update attempts. Can someone tell me what I'm doing wrong? I'm eager to get past this problem so that I can start tranfering personal movies and video files.

    You Have an iPod Photo, You do NOT have a 5th Generation Video iPod. Get it? You need the 5G model to play video.
    If the salesman told you it was the 5G model he lied, was ignorant or both. If video is important or if thats what you thought you were getting you will need to return your 4G iPod photo for new iPod.
    Rotsa Ruck!

  • My ipad is connected to my wifi, however when i try to sign my ipad into facetime is says that it is having trouble connecting. I use my wifi to get on the internet on my iPad so i have no idea what the problem is. Help Me

    My ipad is connected to my wifi, however when i try to sign my ipad into facetime is says that it is having trouble connecting. I use my wifi to get on the internet on my iPad so i have no idea what the problem is. Help Me

    - Did it successfully connect to the network before?
    - Do other devices successfully connect to the network now?
    - Does you iPod successfully connect to other networks?
    - Have you reset your iPod?
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Reset network connections: Settings>General>Reset>Reset Network Settings
    - Powered off and then back on your router
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
    -When you restored you iPod did you restore to factory defaults/new iPod?  If not try that.
    - If you look at the network properties on the iPod what IP address is assigned when you think you are connected but actually have no internet connection.  If it starts with 169 then the iPod never connected to the router, the 169 address are self assigned.

Maybe you are looking for

  • My iphone is new and i get error 9 during upgrading

    I Got a new iPhone 4 16G three days ago and yesterday itune ask for upgrade for the new softwrae and during the upgrading error 9 appear i try to restore but always error 9

  • Sound Preferences keep changing

    Hello! I had purchased a Blue Yeti microphone, and i had change all my sound settings. After a while, my sounds settings keep changing by them selves! Anyone know how to fix this problem? It's really annoying!

  • Changes in Service Tax Rate from 12% to 10% from 24th Feb 2009

    Dear All SAP Consultants     In our Company we are using JSRT ,JEC3 & JES3 Condition type, for calculation of S.Tax, Cess & H,Cess respectively, for Service Tax Calculation. We have maintain above Condition through FV11 [Maintain Condition Type for V

  • PDF FORM CONFIGURATION

    Hi All, I am facing some problem for configuring ADOBE form i've IDES 6.0 , so please suggest me how to configure PDF form in IDES  6.0 or which sap notes we have to apply for ADOBE form developments? With Regards Navin.

  • ICould error, "An error occurred while trying to save the iCould account"

    Randomly, all contacts names were gone and replaced with numbers. Told to sign-in to iCould, signed it, got error "An error occurred while trying to save the iCould account" -Help Please