Having Trouble Recording Skype Interview on Separate Tracks

I'm using the Presonus Firestudio Project Mixer and Adobe Audition to try and record Skype interviews on separate tracks. I am positive I have all cables hooked up properly on the mixer.
Everything works fine except track two, which should only be picking up the other line of the Skype call, is still slightly picking up my voice. So track one is just me. Track two is podcast guest plus still me faintly. I have track one dedicated to mic one, which is me. And track two is dedicated to mic 3, which loops through the back on the mixer to the main outs.
How can I completely eliminate myself on track two so that it only picks up the guest?

I have two XLR Male to 1/4 inch TRS Male coming out of Mics three and four of the Presonus and routing back around back into the main outs of the Presonus. This is supposed to make the loop so the Skype call can record separately.
I'm connecting Audition to the Presonus simply by selecting Mic three for the guests track and Mic one for mine. It's picking up both fine, it's just picking me up on both tracks. The Skype signal is coming into Audition via the Presonus mixer.
All Audition, Skype and Mac audio settings are set entirely to Presonus.

Similar Messages

Record Skype Interview Put interviewee on separate track

I want to make an interview podcast using Skype. I have garageband and an M Audio Fast track usb interface. Does anyone know if it is possible to put the interviewer and the interviewee on separate tracks using what I have? Thanks.

The best way to record skype interviews is off the computer.
http://www.podcast411.com/mixer.pdf
Here is the set up I have been using for the past 8+ years for podCast411. If you pan your self left and the other person right - you can record each on your own side of the track and can break out in post.
This will give you the best sounding skype recordings and also the most reliable recordings.
You do NOT want to record in garageband - if you are doing an interview - garageband is very flakey and you will have crashes with garageband and you WILL loose interviews. Do not use Garageband to record your interviews.
Regards,
Rob W
podCast411

I am having trouble downloading Skype to my tablet

I have a Eee pad made by Asus. It is a Transformer. I am having trouble downloading Skype to it. How can I get some help getting it done?

You cannot download Skype to the PlayBook (yet)...
You might try this : go to imo.im on your browser....

Having trouble getting Skype to work. It did when I first got the computer about a yr ago but then quit. I've trashed and reinstalled the program and set the preferences to allow Skype but nothing is working. Any suggestions?

Having trouble getting Skype to work. It did when I first got the computer about a yr ago but then quit. I've trashed and reinstalled the program and set the preferences to allow Skype but nothing is working. Any suggestions?

all I can suggest is completley unistall as here
https://support.skype.com/en/faq/FA12073/how-can-i-completely-uninstall-and-then -reinstall-skype-for-mac-os-x
Then reinstall
http://www.skype.com/en/download-skype/skype-for-mac/

How to Record a Interview with Multi tracks using Adobe Audition CC

Hi,
I would like to record a Skype Interview call using Adobe Audition CC.
I am able to get Track 1 to reconize my voice, but I can't figure out how to get Track 2 to pick up the other person's voice I am interviewing through the Skype Call. I am using Skype's call recording as a back up, however, I hear the call quality is better if it goes straight into Adutiton.
I am sure it has something to do with the input and output, but just ahve no idea where to start.
Any help would be greatly apprecaited!
Thank you!!!!

For product specific questions you may do better in the specific product forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right to open the drop down list and scroll
http://forums.adobe.com/community/audition

TS1362 I am having trouble playing imported cds. The tracks keep sticking which is a bit like buffering is this a common problem and can i rectify it.

Being new to the iphone I am having trouble listening to imported cds. The tracks keep sticking a bit like buffering. Is this a common problem and can it be solved just by addressing a general buffering problem which I already have on youtube but have not rectified as yet.
Thanks Kaz T

If <alanfromnewtownards> fix fails to address the issue - turn off iMessage and Facetime in Settings. Settings\iMessage, and Settings\facetime.
Sync by cable to iTunes.
Leave cable connected, open Settings\iCloud and ensure at least Mail is on and dsplays your Apple iD email - then turn iMessage and Facetime back on. Ensure that in the ISettings...\iMessage...\Facetime page that the Receive at field and Receive video calls at email address is the same address as your Apple I.D.
Resync when finished.
If still having problems with Facetime then check that the required port is open - allowing traffic in your router.
http://support.apple.com/kb/TS1629
In some cases you may need to turn on Port forwarding and open the port manually to allow traffic through. See your router documentation for details.
If having problems verifying, open iTunes store App on your pad. at bottom of page, click on your ID and sign in. Go to your Account details (re-veryfying and answering security questions may be required to do this) - check all details are correct.
Finally right click your device icon in iTunes and select Reset warnings. resync when finished.
Ct

How to record two mics on separate tracks in GB?

So I've got the Mackie 820i, and two Shure sm58 mics hooked up. I'm able to record, and everything seems fine, but at the moment it's on one track. How do I set it up so that each mic records on a separate track? Thanks in advance for any help.

lazyeyelou wrote:
How do I set it up so that each mic records on a separate track?
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrecording2tracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to record multiple inputs to separate tracks using an Audigy 4 pro

Hi,
I've been playing with my Audigy 4 Pro and Cubase LE on my windows XP box (since it ships with the card) and have been reasonably impressed with the results I've been getting (nothing amazing to be sure, but more than enough to amuse me).
However, I'm now at the point where I want to record the mic/line 1, line 2, and line 3 inputs all to separate tracks in Cubase LE. I'll be ****ed if I can figure out how to do it.
I've got jacks going into the front of the external Audigy 4 (into all the inputs) but I can't find any option anywhere that will allow me to select multiple recording inputs at the same time. From all of the reading I've been doing it looks like I need to do some ASIO configuration somewhere so that Cubase LE will give me some more VST input mappings.
So firstly, I guess is what I'm trying to do possible with the Audigy 4 Pro and Cubase LE?
If it is possible, what do I do to enable the additional inputs? I seem to have been through all the possible programs and configuration screens at least three times over and am now completely stuck.
Any help, thoughts, pointers, step by step instructions would be greatly appreciated.

Entrop1cLqd,
This is off the top of my head so my memory may be incorrect here but this is what I remember. First off make sure that you have Audigy ASIO or Audigy ASIO 24/96 selected in devices. Then go to VST inputs setup and make sure that they are all active. Note the names in here as that is how the recording is mapped (E.g. if Line In 3 is even with IN 1 then Line In 3 will be recorded from IN 1). Arm the tracks you want to record on and select their recording inputs based on the labels from the VST inputs setup.
This should get you setup.
Jeremy

I'm having trouble recording a bass to go along with a recording I dropped into GB. I'm using an interface and I can hear the bass line, I've clicked on the 'record' button, but the sound does not record. What am I missing?

I have the bass connected to my imac with an interface.
I can hear the bass and I've clicked on the 'record' button, but the sound does not record.
Am I missing something ?
Please advise.
Mike

Double check all your audio settings.
System Preferences --> Sound --> Input should be set to your audio interface.
GB --> Preferences --> Audio/MIDI --> Input should be set to your audio interface.
With your track selected, open the Track Info pane, and select the Edit tab. Under input make sure that Mono 1 or 2 is selected (which number will depend on which input you plugged your bass cable into).

Having trouble recording a video using Presenter 9, inside PoswerPoint installed as part of MS Office 10, PP version is 14...

The Presenter add in opens up just fine. I can do most everything with the Presenter tool bar, including recording and publishing audio for the slides, but I get an error message when trying to use the "Video" recording function. I have a screen shot of the error message if that would help, But is basically says the "Application encountered and internal Error. If the error persists, contact someone." Adobe support is useless on this issue. Does anyone have any ideas?
I DO NOT have two monitors set up and the button labeled "Use Presenter View" is unchecked.

Check that your video drivers are up to date.

Having trouble playing 1 of my iTunes tracks

Dear ITunes staff,
For some reason my iTunes won't play track 5: On Top of the World, from Imagine Dragons. Plays the full digital CD except this one...it is pretty frustrating...I deleted it and redownloaded it and it just wont play... Please rectify this problem on the cloud, thank you. Albert...

The people responding in this forum are just other Apple product users like you, not Apple itself. Apple Support Communities is primarily an end-user to end-user (i.e., users like you helping other users) technical issue support feature. Feedback will likely get more attention if you send it using:
http://www.apple.com/support/itunes/

Having trouble assigning "buttons" to mute certain tracks on&off

I can assign all the faders and trim knobs on my "Novation reMOTE sl61;" but i cant seem to assign any of the "buttons" on my device to map the sameway i can get the other knobs and faders to map on my device.
I want to make sure what I'm doing can even be done in Mainstage for one. What i have is a concert with 2 vocal tracks and a midi keyboard track. what im trying to do is i add a "button" parameter in the "workspace" section. and im trying to map that button to mute one of the vocal tracks on and off.
I have sucessfully mapped the button to mute the track on and off by using the mouse click in the workspace section. but the button on my device still wont map, which is what i need it to do.
What should i Do?

Yea it does, but this is when midi mapping gets a little confusing for me.
this is what im working with here. It says that the number is 40(#08lsb) and when i press it the numbers underneath the highlighted button say "40" and "0" underneath the "40" and the "0" changes to a "1" when i press it. but i still cant get the button to illumitate or trigger what i want it to.

Having trouble with WWHL on Bravo

I am having trouble recording WWHL on Bravo at 11 PM. Anybody else?

What exactly are you seeing when you try to record? bendmitchell wrote:
I am having trouble recording WWHL on Bravo at 11 PM. Anybody else?

How to Record an Interview call through Skype in Audition CC

Hi,
I would like to record a Skype Interview call using Adobe Audition CC.
I have seen posts about this topic, however, no one gives a step by step process to set it up if you are an absolute newbie to Audition.
I am able to get Track 1 to reconize my voice, but I can't figure out how to get Track 2 to pick up the other person's voice I am interviewing through the Skype call. I am using Skype's call recording as a back up, however, I hear the call quality is better if it goes straight into Adutiton.
Do I need a mixer for this to be possible?
I am sure it has something to do with the input and output, but just ahve no idea where to start.
Any help would be greatly apprecaited!
Thank you!!!!

idopodcast wrote:
Thank you!
Now you said it's best, however, if you don't have a mixer is it still possible?
It might be, but if you think that setting it up with a mixer might be difficult, I can assure you that without one it's going to be a whole load harder, especially if you have to use an internal sound device. And no I haven't tried - nor am I likely to.
Also, the PDF is great. If I get a mixer, Are there directions for after you set that up and you need help setting up the interface?
No, because I haven't rewritten it yet! (as mentioned on the other thread).
If you are serious about doing this, a small mixer is a very good idea anyway, and they really don't cost that much nowadays. I haven't tried it, but I think that it should be relatively easy to set this up with one of the mixers that also contains an audio interface (so you just have to connect it via a USB cable). I will look into that. The version in the .pdf works with any mixer, although it needs unimpeded line in/line connections on your computer. Most of them can just about manage this, but some manufacturers still make this difficult.

Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?

Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?

These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Also review this support aticle as it might be causing due to internet connection: http://support.apple.com/kb/ts1368
Hope this helps.

Having Trouble Recording Skype Interview on Separate Tracks

Similar Messages

Maybe you are looking for