Having trouble restarting computer after installing iTunes

So I just finished buying my iPod Classic not too long ago. I use a Windows Vista computer (Gateway) and have attempted to install iTunes several times. Whenever I do and go to restart my computer, it stays stuck on the start-up screen. It refuses to boot up Windows. The same happens when I shut it down and try to start it back up manually. Eventually it'll give me an error saying that Windows could not start, so I go ahead and choose to let it check for problems, then it essentially forces me to do a System Restore on my computer to the point before I installed iTunes, with no iTunes installed at all. Is there anyway to fix this? o.O

Is your iPod still plugged in during this time? If so, take it out and try again. Something similar happened to me and this ended up the culprit.

Similar Messages

HT1923 my iphone4s is not connected to my computer after installing itunes...

my iphone4s is not connected to my computer after installing itunes... if i uninstall itunes and connect my phone then computer is detecting my phone.... how to solve this plz help me....

itunes is creating the problem... if i connect my iphone to itunes it is not detected.... after uninstalling itunes, iphone connects with computer.... u get me?

Adobe Phoshop Elements 11 installed, restarted computer after install complete. When launch, Elements Organizer licensing agreement pops up. Accept and it continues to pop up..over and over. Will not launch program. Help?

Adobe Phoshop Elements 11 installed, restarted computer after install complete. When launch, Elements Organizer licensing agreement pops up. Accept and it continues to pop up..over and over. Will not launch program. Help?

Try launching the editor and entering your serial number there if asked.

IPhone is no more visibile in My Computer after installing iTunes 8

Hi all, after installing iTunes 8, iPhone isn't visible anymore in my Computer section in Windows. Previously, when I connected it, it was recognized as a photocamera and, from my Computer, i could access to it to see the photos that are stored on the iPhone.
Now, instead, iPhone isn't displayed anymore: except for this, it works correctly; iTunes 8 recognizes it and synchronizes it.
Notice: after the iTunes upgrade, when I've connected the iPhone for the first time, Windows says that he has found a new hardware and installed a new driver for an Apple Mobile Device USB.
Has someone else experienced my problem? Thanks in advance!

im having the exact opposite problem....my 3g is recognized inmy computer as a camera..but isnt recognized in itunes?
i have no pics downloaded from emails (as i researched this before)
the other night had same problem, had to restore phone, and re-install itunes..then no problem...but tonite trying to add new music and same thing again.
disabled iphone under imaging devices, and its only listed under usb controllers...computer recognizes it every time
there has to be a better way than restoring/reinstalling everytime?..has to be some little catch?
HELP!
FYI, i phone not being used as phone, being used as ipod, and only using wifi..has no sim installed.

Is anyone else having trouble burning CDs after installing Snow Leopard?

I received Snow Leopard plus iLife and iWork for Christmas and installed it on Wednesday. I burned two playlists to four CDs on iTunes Tuesday but today when I tried to do the same things using the exact same discs and the following message popped up on iTunes: "Disc burner or software not found." This is obviously happening because of Snow Leopard or the new iLife and iWork I installed. Any thoughts? How can I fix this? Do I need to install something else to be able to burn discs again? I need help really fast because I need these CDs right away. Thanks.
Message was edited by: tangodoodles

No to the subject question. However, I've only burned boot discs for DiskWarrior and a Snow Leopard install disc, not music ones. Launch System Profiler in Utilities and select Disc Burning under Hardware. On my iMac it reports:
*OPTIARC DVD RW AD-5630A:*
+Firmware Revision: 1AHN+
+Interconnect: ATAPI+
+Burn Support: Yes (Apple Shipping Drive)+
+Cache: 2048 KB+
+Reads DVD: Yes+
+CD-Write: -R, -RW+
+DVD-Write: -R, -R DL, -RW, +R, +R DL, RW
+Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO+
+Media: To show the available burn speeds, insert a disc and choose View > Refresh+
You should see something similar or your burner's gone south and that's a hardware issue.

Anyone have trouble with IPad3 after installing OS6.1.3? keeps crashing

Anyone having trouble with iPad3 after installing OS6.1.3? Mine keeps crashing.

Mine seems to be just fine.
Try a reset,
Reset your iPad by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPad will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back.

Computer can't find DVD/CD-ROM drives after installing iTunes

After installing iTunes, my computer no longer can detect my DVD-ROM and CD-RW drives. They've disappeared from the "My Computer" window.
I ran "System Restore" and the disc drives showed up, but now they're undetected once again after I re-installed iTunes. I've restarted, I've uninstalled and then reinstalled iTunes, I've run the built-in diagnostic self-checks on the drives, I downloaded updated drivers, I uninstalled and reinstalled drivers, spent 1 hour on the phone with Apple support, and finally spent 2 hours on the phone with Dell Support. Nothing. Please help--I want to be able to use my iPod with Windows.
Dell Dimension E510 Windows XP Windos XP Media Center Edition 2005
Dell Dimension E510 Windows XP
Dell Dimension E510 Windows XP

Hey there. May I interject? Anyone mind?
For the most part, what's occurring is one of two things. Either...
A) an application (such as Roxio, Nero, iTunes, etc.) is installing a driver file (as a .SYS) or replacing a working driver file that is referenced within your registry. For some folks, the replaced driver is still referenced by either an UpperFilterCheck or a LowerFilterCheck, and the device manager is actually seeking out that file that, well... no longer exists. Or, when you try and uninstall the application (iTunes is the frequent transgressor) everything is removed, including the related driver files, but the registry isn't altered... so the device manager continues to try and locate that driver file... which no longer exists.
or
B) a virus (or trojan) burrows its way into your file structure, and creates an element of itself disguised as a .SYS file. We've seen this happen before with viral elements disguising themselves as audio or video card driver files, in the efforts of masking themselves from lower-class anti-virus programs (or un-updated ones). In this case, they take on the name of a driver file that the optical drives are "familiar" with, and so, with the intention of being "fast, friendly, and efficient", the optical drives are tapped to utilize this new "driver" file... and it gets referenced in the registry as such.
However, when your anti-virus actually snaps to it, and removes the virus / trojan, and you go off on a virus-killing mission, galavanting through the registry and cleaning the little buggers out in Safe Mode and everything... you might remove the viral elements... but... the reference to them might still remain. The device manager is still looking for that "driver file", and will cause the optical drives to lock up in a Code 39 or Code 41 because of it.
Either way, the thing to do to reclaim your optical drives is located in your registry here:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}
You'll want to have that open, and a mini-window of the following:
START -> CONTROL PANEL -> SYSTEM -> Hardware (tab) -> DEVICE MANAGER -> Offending Drive (with yellow tag by it) Right-Mouse-Click and PROPERTIES -> Driver (tab) -> DRIVER DETAILS
Notice that list. It references all the drivers that that particular drive is utilizing. There should be a single .DLL (dynamic link library) file and multiple .SYS files. It's the .SYS files we're focusing on, and they should be located in your C:\WINDOWS\System32\drivers\ folder stem. If you want to open a new window explorer, and go verify that each of those driver files still exists in that folder stem, you may.
At this point, compare the Driver File Detail list with the Registry Tree Location you're sitting in, and look at the UpperFilterCheck and LowerFilterCheck key values. Your offending key value will NOT be on your Driver File Detail list!!! It might be as small as "PFC" or something else, but that value is referencing to a driver file that no longer exists. Delete that offending key value. Close the registry.
Close the Driver File Details and Drive Properties windows. At this point, to finish this up, you need to Soft Uninstall (Right-mouse-click on the drive, and hit "Uninstall" ) the drive(s), let the Device Manager refresh... then hit ACTION -> Scan For Hardware Changes ...
This should start a new Found New Hardware cycle, and.... poof!... your drives should be back to normal
I don't know if this will help, I think it should.
Good Luck. Post back if you have a problem.
Rachyl

Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks

Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks

Any one or a combo may help
Give your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
Try a different USB cord
Try a different USB port
Try rebooting your computer
Try closing/opening iTunes.
If you go through that and it doesn't work, try going into the control panel, add/remove programs. Uninstall iTunes, Apple Mobile Device Service, Apple Application Support. Then redownload and reinstall iTunes and try again

After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?

After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?

I hope it doesn't effect how I down load my itunes to my ipod and iphone.
No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.)

TS1277 after installing itunes, my computer won't recognize my cdrom/burner any longer. Worked ok before and I have uninstalled itunes and it works again and when I reinstall itunes it won't work again. I have also went into registry files and deleted

After installing itunes, my desktop computer doesn't recognize my internal cd rom/burner. I removed itunes and it works ok and when I reinstall itunes it won't work again. I went into the windows registry files and deleted the lower filter which is one correction for this and it worked ok until the next itunes upgrade and now it won't work again. If anyone knows what to do please let me know. My device manager shows a code "10"

My device manager shows a code "10"
That suggests an AFS.sys issue. But we'd better doublecheck.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". (If you're running iTunes 11.0.x you'll need to bring up your menu bar first to see the Help menu.) Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
Go figure? Logical, No!

Awful Playback after installing iTunes 7

I can see from the Gapless Playback forum that some are having real trouble after installing iTunes 7. I haven't had that problem (yet) but I have noticed that if I start another application, such as a game, that has sound, then the iTunes playback breaks down and the playback is wildly distorted.
Anyone else seem this?
Any clues Apple?

I shamelessly stole this from another thread - maybe it'll help you.
The Fix:
Close iTunes 7
Upgrade your sound card drivers (just to eliminate that as an issue)
Upgrade to latest Microsoft direct X version:
http://www.microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A -9B6652CD92A3&displaylang=en
Start
Run
Type: dxdiag
Click "sound 1" or similarly named tab
Slide bar to "basic acceleration" (mine was at full, and basic is two clicks to the left)
Exit
Restart iTunes 7, and startup music

8.1 can't shut down after installing itunes

I recently reformatted and did a clean install of window's 8.1
I have done all updates, both windows and drivers and the machine is very smooth and stable.
After installing iTunes the computer will no longer shut down, it displays the logging off / shutting down screen but then just reboots.
I have attempted numerous resolutions to no avail, i.e. disabled NIC as bootable device, disabled the hybrid boot feature & flashed and tweaked some BIOS settings.
The computer will not even shut down when I give the command "shutdown /s /t 0"
I only had Windows Office and iTunes installed on the computer and suspecting that iTunes may be the culprit, I uninstalled it and now the computer shuts down without any issue.
I have since read several threads about iTunes and shutdown/restart issues with 64 bit versions of Windows although I have not found anyone else with my exact issue.
Is anyone aware of a resolution for this?
For now I will need to install iTunes so I can sync my phone and then uninstall so I can shut down!

Fingers crossed there will be an update for this, I was lucky that my install so was new that there weren't very many things that could have caused it because I don't think it would have ever occurred to me that iTunes was the issue.
I literally tried every other possibility before waking up in the middle of the night and realizing that the problem started right after I installed iTunes.
I have had issues with Apple software in the past where I attempt to disable it from launching automatically when I boot the computer and it will simply create another entry for itself in the startup list.
If I disable that one it makes another, and another and another.... It's like the freaking Apple hydra.
The want me to know how much I need them! lol

After installing itunes I get an error that says that I have to unistall and reinstall itunes because I'm missing something but it does not tell me what it is.

After installing itunes on my pc i get an error that says that i have to uninstall and reinstall itunes. I finally got it to down load and now it says that I need an upgrade. It's getting very frustrating as I've never had this kind of trouble.

What is the precise wording of the message that is appearing?
What OS is on the computer?

No cd drive after installing itunes

Hi,after installing itunes to my packard bell notebook i noticed that i had no cd drive showing in 'my computer'when trying to start my cd writer it showed 'no recorder'.i've had to uninstall itunes and download a update from roxio to get my cd writer back again.please can anyone help me with this problem.also is it possible to sync my ipod nano with windows media player without installing itunes.
Regards,Tony

No you can't use WMP to sync your iPod.
You could take a look at Yamipod which allows you to manage your iPod without iTunes, but why not try and get iTunes working.
http://www.yamipod.com/main/modules/home/
There is a help on trouble shooting CD problems here:
http://docs.info.apple.com/article.html?artnum=302974
It sounds as though you want the link near the bottom on inability to use CDs.
There is also a microsoft link on CD problems that you might find useful:
http://support.microsoft.com/kb/314060/

Having trouble restarting computer after installing iTunes

Similar Messages

Maybe you are looking for