Having Trouble setting up 9i on WinXP Pro
Hi
I've downloaded Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP. I unzip the 3 files into their appropriate folders, disk1, disk2, etc. Then when I clicked setup.exe or autorun.exe, nothing happens. I've tried changing the properties under each *.exe to a different compatibility mode. Also, I have a P4 1.6 Ghz with 640MB of memory so I know my computer is powerful enough. If anyone can help, I would greatly appreciate it.
Honestly, you are using an ancient version of Firefox that uses out of date sync code using an unsupported system so I'm not surprised sync won't work.
Similar Messages
-
MSI X58 Pro - I'm having trouble setting up my first Raid 0 Array
Hey guys! I have an i7 920, X58 Pro, 3x2GB DDR3, Radeon 5850, 640GB WD Black (Windows 7 64 bit + applications) and 1TB Samsung F3 (backup) system and I'm having trouble setting up a raid 0 array. I recently decided to purchase two additional 1TB Samsung F3 harddrives in order to create a raid 0 array, while still keeping my original two harddrives separate. I installed the new harddrives today, installed the JMicron drivers that were on the drivers disk that came with my motherboard, went into the bios, and changed it from IDE to RAID. I then went into the raid bios, selected the two new harddrives and selected raid 0, saved everything and tried to load Windows and Windows refuses to boot up. I got an option to try fixing Windows but that didn't end up fixing anything. Finally, I was forced to go back into the bios and switch it from RAID back to IDE just to get Windows to boot up again. Does anyone know what I need to do in order to get this raid 0 to work? Thanks a lot in advance for your help!
Perhaps create a software RAID? You can do it in Windows through Control Panel --> Administrative Tools --> Computer Management --> Disk Management.
A quick guide: http://www.softwaresecretweapons.com/jspwiki/windows-7-software-raid-disk-partition-and-volume-context-menus -
I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit. Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere
It's evident that you are using Snow Leopard or earlier (or very early Lion) since you have the now obsolete MobileMe preference pane.
The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further. -
is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin
Install this to get X11 functionality back in 10.8
http://xquartz.macosforge.org/landing/
Worked great for me and others.
Jerry -
Having trouble setting up my website. It's probably a silly mistake.
So I've registered a domain and hosting plan with A Simple Orange which had a pretty good deal since I had a coupon for 20% off. I've tried using Joomla to manage my website, but I couldn't get the hang of it. So I'm trying out iWeb 09' now and just having trouble setting it up. I've gone to me.com and added my website and added the CNAME correctly I hope. Here is a picture. http://imgur.com/XI8Lw.png
Next I opened iWeb and setup MobileMe in the preferences panel. I've tried publishing the information from iWeb to my website, but my home page doesn't change. You can see here at RyanSchefer.com that it's just planNo. Your CNAME setting is not correct. The CNAME and web.me.com are correct with web.me.com being your host. However, your domain name is incorrect - don't understand why you have put mobileme before it? You just enter either your domain name on its own so domain.com or you need to set up two separate CNAME entries, one being for www, CNAME, web.me.com and then one being @, CNAME, web.me.com. The @ stands for your domain name and the www is your sub domain.
Try altering this and it should work okay. -
Having trouble setting up email accounts in the mail app?
Hi Apple community,
I am having trouble setting up my email accounts with the osX mail application. I have two accounts, an outlook and my college email through google. When I try to add the outlook account the prompt says that it cannot connect to the server and when I try my college mail i get the following prompt.
"Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
Please note that my college account is run by gmail and ends in murraystate.edu
Thanks, Will.Hey will,
okay for your college email. Heres what you do.
Try adding your email and wait for the message to come up
Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
Once it does, you will notice 2 extra boxes One says username and the other password. You will notice that the username will not have @murraystate.edu
Add this and continue and this should now be added as an email account and should be able to receive emails as normal.
For your outlook emails, I would recommend using the following article to set it up. It is fairly straightforward.
http://howto.cnet.com/8301-11310_39-57602775-285/how-to-set-up-mac-mail-to-use-i map-for-outlook.com/
Hope that helps. -
Having trouble setting up FaceTime. keep giving me Apple ID password
having trouble setting up FaceTime. trouble at verifying use I'd. I have my email setup with different password since I have tw setup email. my Apple ID has different password. same email name.
Hello sangjaimepark,
Thank you for the details of the issue you are experiencing with activating FaceTime. I recommend reviewing the article below for FaceTime activation issues. When trying to activate FaceTime, you will need to use the email address you use for your Apple ID and your Apple ID password and not your email password:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Having trouble setting up network
Hi guys,
I just recently moved to a new house and am having trouble setting up the network with my airport extreme. There is a cable modem that is networked to the house so that every room has an outlet.
I connected the airport to one of the outlets with my macbook and when I create network, I cannot connect to the internet wirelessly even though the macbook detects a network when I set it up with bridge mode. But hard wired through the router I can surf the web as I am doing right now.
When I hit share an IP address, the internet does not work at all. It seems to work fine with my old netgear router, but would prefer using the airport.
I've also reset the airport as well with still no luck. Any help would be appreciated. ThanksHave you tried powering down the modem for 5 min and then turning on with the ethernet connected to the WAN port of airport extreme?
-
I am having trouble setting up my email and syncing my outlook calendar wiht my new iphone 4s.
How do you connect to the internet?
Most of the time, the problem lies here. You can try a couple of things. First, try only 3G or carrier data. Then, try only wifi. If that still doesn't work, your only other option is to try a different hotspot.
I had the same problem before when I updated to iOS 4.3. I thought it was the update at first. I usually have the carrier data turned off because my plan doesn't have an unlimited provision for it. I forgot that I also switched ISPs from DSL to a visibility unit package - meaning I had to setup my laptop so that I could get wifi from it. I realized this when I visited a friends house that I knew I could connect properly before.
My problem was with my laptop. It seems that Little Snitch blocks the ports being used for mail and push notifications. I haven't figured it out exactly since I still can't get email when I'm using my laptop connection. But, it works fine when I'm using ONLY 3G or both/wifi only if connected to a different hotspot.
Hope that helps. -
Having trouble setting up a linksys WRT54GS router with v...
Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self but the router will not connect to the internet when installed like the cd tells you to.
online help and phone help has been less than helpful, anyone have any Ideas?Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field. PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas?
-
I just got a new ipad 2 but I having trouble setting it up, can someone help me. thank yoy
I just got a new ipad 2 but I'm having trouble setting it up, can someone help me?
Please read Chapter 2.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
i'm having trouble setting up my new 5s. it won't connect to phone service and my old phone is still getting all my messages
According to http://en.wikipedia.org/wiki/IPhone_5
the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
It does not use SD cards.
Fake iphones are really Android phones using the skin of iOS6.
Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
But if you are directed to Google Play, then I'm afraid you've gotten a copy. -
I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to back up.
Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you. -
Im having trouble importing mov files into premiere pro on creative cloud, have installed quicktime
Im having trouble importing mov files into premiere pro on creative cloud, original problem was no video and only audio when I imported mov file, so I have installed quicktime after reading that may solve the problem,but now an error message reads codec missing or unavailable, any help would be appreciated
MOV is a wrapper... what is inside the wrapper?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
Maybe you are looking for
-
I've just purchased Sony Bravia HD tv and I have it connected it to my MBP (via DVI) to watch high def shows and movies. Right now I'm using a DVI to VGa cable, but I'd like to take advantage of the HDMI port on the tv to get a better picture. Anyone
-
Updated to ios7 and iTunes 11.1, Music won't play or Error sign ! when clicked on
After updating my ios and itunes my music on my ipod will not play and an error sign ! shows up to the left of every song when clicked to play. Also when i undock the ipod it would show that all my music is gone! But when i redock the ipod it shows t
-
Guys Plz help me......its urgent
Hi, I created a project with name "tech" n Enterprise application project name "techEAR".I am using RAD. i placed JSF related jars in tech/WebContent/ WEB-INF/lib folder.and placed my application related jars in techEAR. And i selected all my applica
-
My Magsafe has been working for almost a year now, but all of a sudden, it stopped working a few days ago. I've been trying to use different AC plugins like the "Duck head" and the long cord one that I don't know what the name is to. As I said in the
-
Two apple TVs, 4 computers and home sharing
We have four computers that work well with our Apple TV and home sharing. Is it possible to have a second Apple TV operate on the same network and stream content to a second TV? I seem to recall there was a limit to the number of computers that could