Having trouble setting up sonos with my airport extreme

After setting up the airport extreme I can no longer access my wireless sonos speakers. The bridge is connected to the airport and that's fine but it won't recognize the wireless speakers. I think it is probably a config issue. On my old router I could set up a channel for sonos to use but can't seem to find how to do this on the airport or if it is possible? Anyone have any ideas? or are familiar with Sonos? Thanks

I have this issue, too. Did you find a solution since you first posted?

Similar Messages

  • Having trouble setting up file sharing through Airport Extreme

    Hi, I am trying to set up file sharing on my USB hard drive through the Airport Extreme, on my HP laptop with Windows XP. I went through the steps in manual setup in Airport Utilities, and my hard drive shows up under the Disk Utility in the Airport Utilities, but the problem is that I cannot figure out a way to find the hard drive from Windows XP. Should it show up in My Computer? I've spent a few hours trying to figure it out and I am close to giving up. If anyone can help me solve this problem, I'd really appreciate it!!!

    I have this issue, too. Did you find a solution since you first posted?

  • Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    Install this to get X11 functionality back in 10.8
    http://xquartz.macosforge.org/landing/
    Worked great for me and others.
    Jerry

  • Having trouble setting up Mail with a POP account

    I am trying to set up Mail with my Universities webmail service, and according to their tech page I need to set it to POP. I also made sure that I have the incoming and outgoing mail servers correct, and i've made certain that I am entering my username and password correctly. But when it loads and trys to get my mail it says that the password I supplied is incorrect, but I know that's not true. I am absolutley sure that both the username and password are entered correctly.
    Does anybody know how I might fix this?
    p.s. my girlfriend is having the exact same problem, so it isn't just me entering something wrong

    I know you said the usernames/passwords are correct but, (if you can), login via webmail using those same strings, see if that works.
    Write the text to a note and copy and paste from there so you are sure you've not input something wrongly.
    Failing that do a quick keychain first aid too.
    If that don't work then I'm out of ideas, (for now at least).

  • Having trouble setting up router with verizon modem

    im trying to set up my linksys router wrt54gs with my verizon dsl modemr.  im having a hard time.

    Try these steps :
    Access the setup page of the router by launching an
    Browser and type on the address bar, 192.168.1.1 and press enter. When
    it prompts for the username and password, leave the username field
    empty and provide password as "admin" (Without quotes)
    click on ok.
    On the main setup page the ""Internet Connection Type"" should be
    on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
    button.
    Now click on the sub tab ""MAC address clone"".
    - Click on enable
    Click Clone & click save settings
    Check WAN Ip on Status page of router ....
    If getting Valid Ip .... try going online
    If you are getting Ip - 192.168.1.X ...change the LAN Ip to 192.168.2.1 ....Power cycle for 3-4 minutes ...
    Try going online
    If still not working ...use Internet Connection type as PPPOE .... Use Username & Password provided by Service Provider ....
    Click save settings....
    Look for WAN IP address again under status page ....
    Hope it works for you....

  • Having trouble setting up headset with microphone

    Hi,
    I own a satellite A135 that is currently running on Windows Vista Home Edition. I tried using a headset with mic but somehow the mic always turns to mute after I've exited the set-up page. I'm starting to get frustrated, particularly since I need to talk with someone using Skype. Please help.
    Thanks

    I have this issue, too. Did you find a solution since you first posted?

  • Can I reset my AirPort Extreme by pushing the tiny reset button on back of the unit (I am having trouble setting it up) I read that pushing the little button will reset to factory settings?

    I am having trouble setting up my new AirPort Extreme.  I think I have it all hacked up.  Can I push the reset button on the back of the unit and reset to the factory settings and start over?

    this should help: Resetting an AirPort base station FAQ
    What used to be called a "hard reset" on earlier models is now called a "factory default reset" on 802.11ac models, so things can get confusing. At least Apples seems to have updated the FAQ recently to reflect the changes with the new models.....if you dig deep enough.

  • Having trouble setting up e-mail on new iPhone 4s. I would like to sync with my outlook mail, contacts

    I am having trouble setting up my email and syncing my outlook calendar wiht my new iphone 4s.

    How do you connect to the internet?
    Most of the time, the problem lies here. You can try a couple of things. First, try only 3G or carrier data. Then, try only wifi. If that still doesn't work, your only other option is to try a different hotspot.
    I had the same problem before when I updated to iOS 4.3. I thought it was the update at first. I usually have the carrier data turned off because my plan doesn't have an unlimited provision for it. I forgot that I also switched ISPs from DSL to a visibility unit package - meaning I had to setup my laptop so that I could get wifi from it. I realized this when I visited a friends house that I knew I could connect properly before.
    My problem was with my laptop. It seems that Little Snitch blocks the ports being used for mail and push notifications. I haven't figured it out exactly since I still can't get email when I'm using my laptop connection. But, it works fine when I'm using ONLY 3G or both/wifi only if connected to a different hotspot.
    Hope that helps.

  • Having trouble setting up a linksys WRT54GS router with v...

    Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self  but the router will not connect  to the internet when installed like the cd tells you to.
    online help and phone help has been less than helpful,  anyone have any Ideas?

    Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field.  PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas? 

  • Hi having trouble setting my airport extreme for guests?

    hi having trouble setting my airport extreme for guests?

    This is likely because you have the AirPort Extreme connected to a modem/router, or gateway device.....and not a simple modem. Can you provide the make and model number of your "modem", as we previously asked?

  • Having trouble setting my airport extreme for guests

    hi having trouble setting my airport extreme for guests?

    Please see your other post on exactly the same subject.

  • Having trouble setting up network

    Hi guys,
    I just recently moved to a new house and am having trouble setting up the network with my airport extreme. There is a cable modem that is networked to the house so that every room has an outlet.
    I connected the airport to one of the outlets with my macbook and when I create network, I cannot connect to the internet wirelessly even though the macbook detects a network when I set it up with bridge mode. But hard wired through the router I can surf the web as I am doing right now.
    When I hit share an IP address, the internet does not work at all. It seems to work fine with my old netgear router, but would prefer using the airport.
    I've also reset the airport as well with still no luck. Any help would be appreciated. Thanks

    Have you tried powering down the modem for 5 min and then turning on with the ethernet connected to the WAN port of airport extreme?

  • Having trouble setting up my website. It's probably a silly mistake.

    So I've registered a domain and hosting plan with A Simple Orange which had a pretty good deal since I had a coupon for 20% off. I've tried using Joomla to manage my website, but I couldn't get the hang of it. So I'm trying out iWeb 09' now and just having trouble setting it up. I've gone to me.com and added my website and added the CNAME correctly I hope. Here is a picture. http://imgur.com/XI8Lw.png
    Next I opened iWeb and setup MobileMe in the preferences panel. I've tried publishing the information from iWeb to my website, but my home page doesn't change. You can see here at RyanSchefer.com that it's just plan

    No. Your CNAME setting is not correct. The CNAME and web.me.com are correct with web.me.com being your host. However, your domain name is incorrect - don't understand why you have put mobileme before it? You just enter either your domain name on its own so domain.com or you need to set up two separate CNAME entries, one being for www, CNAME, web.me.com and then one being @, CNAME, web.me.com. The @ stands for your domain name and the www is your sub domain.
    Try altering this and it should work okay.

  • Having trouble setting up email accounts in the mail app?

    Hi Apple community,
         I am having trouble setting up my email accounts with the osX mail application. I have two accounts, an outlook and my college email through google. When I try to add the outlook account the prompt says that it cannot connect to the server and when I try my college mail i get the following prompt.
    "Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
    Please note that my college account is run by gmail and ends in murraystate.edu
    Thanks, Will.

    Hey will,
    okay for your college email. Heres what you do.
    Try adding your email and wait for the message to come up
    Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
    Once it does, you will notice 2 extra boxes One says username and the other password. You will notice that the username will not have @murraystate.edu
    Add this and continue and this should now be added as an email account and should be able to receive emails as normal.
    For your outlook emails, I would recommend using the following article to set it up. It is fairly straightforward.
    http://howto.cnet.com/8301-11310_39-57602775-285/how-to-set-up-mac-mail-to-use-i map-for-outlook.com/
    Hope that helps.

  • Having trouble setting up FaceTime.   keep giving me Apple ID password

    having trouble setting up FaceTime.  trouble at verifying use I'd.  I have my email setup with different password since I have tw setup email.   my Apple ID has different password.   same email name.

    Hello sangjaimepark,
    Thank you for the details of the issue you are experiencing with activating FaceTime.  I recommend reviewing the article below for FaceTime activation issues.  When trying to activate FaceTime, you will need to use the email address you use for your Apple ID and your Apple ID password and not your email password:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • How to use protect and endprotect in smart form

    hi to all experts,                     im still begineer in smart form , i have two headings like company_code:              purchase doc no: after this i have a table to be displayed with four columns what i want is the whole data should not be spli

  • Replacement for FUNCTION 'DYNP_VALUES_UPDATE'in ecc 6.0

    Hi all! Can any one please tel me the replacement for FUNCTION 'DYNP_VALUES_UPDATE'which is oboselete in ecc 6.0. I need the revised function module for this in ecc 6.0.

  • Substitute var in smb

    The new problem is the %a smb variable is not substitute at runtime for the profile path... I use profile path like this : \\homeserver\share\userhome\NtProfiles\%a I have a directory '%a' and not Win2K or something like an idea...? @+ Edo...

  • Nokia 5700 New Firmware Should Have This Change Lo...

    Hello All! After A Full Anlysis Of Nokia 5700 Xpress Music I want To Inform Nokia Those Changes Which Need To Be MAde In Nokia 5700 New Firmware. Here They Are: * Music Player SHould HAve Exit Button [It takes 2mb Ram When Run In Background]. * There

  • [svn:cairngorm3:] 15393: downgrade maven-release-plugin to 2.0-beta-9

    Revision: 15393 Revision: 15393 Author:   [email protected] Date:     2010-04-13 16:42:01 -0700 (Tue, 13 Apr 2010) Log Message: downgrade maven-release-plugin to 2.0-beta-9 Please check http://jira.codehaus.org/browse/MRELEASE-526 Ticket Links:     h