Having trouble switching from Photobucket to a forum and back again without losing my post.

I am so frustrated and I hope someone can help.
I need help adding pictures from Photobucket to a forum.  I write a story on a forum and store my photos in Photobucket.  On my old computer I was able to keep my photobucket page open in a small window and my post from the forum open in another small window.  Then I was able to go back and forth between the two.  I would write some of my story, go into PB and copy a picture, go back to my post, add the picture, write some more and do it again about 20 more times.
Now on my Mac:
I tried to hit the green minus to keep my photobucket page up but when I tried to go to my forum page I only got Safari and then it closed my photobucket page.
So then I tried ot use the scroll between pages to go back and forth between my post and photobucket.  I got my story started, went into PB, copied a picture and pasted it onto my story then I scrolled back to PB to get a new picture...but when I scrioled back my entire post was gone.  It didn't save anything that I typed or added.  This will not work for me.  There has to be an easier way...heck just a way to do it would make me happy.
So please if anyone knows how to do this, I would really appreciate the help.

Hi SLONER,
You need use the -source option on a non-Internet connected machine.
PLease try the script below:
Install-WindowsFeature Server-Gui-Mgmt-Infra,Server-Gui-Shell –Restart –Source c:\mountdir\windows\winsxs
And follow this thread:
PowerShell to Add GUI to Server Core (ServerCore-FullServer)
I hope this helps.

Similar Messages

  • TS1814 we bought an ipod touch and are having trouble switching from old ipod to the new one

    we bought an ipod touch and are having trouble switching from old ipod to the new one

    OK.
    If you have a question, then explain your issue and ask it.

  • Blue screen of death, and continous reboot.  Phone never actually boots up, just keeps going from reboot to blue screen and back again.  Any suggestion?

    Blue screen of death, and continous reboot.  Phone never actually boots up, just keeps going from reboot to blue screen and back again.  Any suggestion?

    Hello jared1915
    If you are stuck in that loop, the next step would be to restore your iPhone. Check out the article below to get your iPhone into recovery-mode and restore it in iTunes.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • Having trouble switching from Core to GUI with Server 2012...

    Hello,
    I am currently in the early stages of studying for the MCSA - Windows Server 2012 R2 and I'm playing around with an Eval copy of Windows Server 2012 R2 DataCenter.  I have two separate installs where one is the Full - GUI install and the other is Server
    Core.  I've learned in my studies that it is possible to switch back and forth between Core and GUI through Powershell cmdlets.
    Right now I'm trying to switch from Server Core to GUI and I'm using the following Powershell command:
           Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell
    It starts off like it's going to work but then after about 68% of the way through, I get this:
         Install-WindowsFeature : The request to add or remove features on the specified server failed.
         Installation of one or more roles, role services, or features failed.
         The source files could not be downloaded.
         Use the "source" option to specify the location of the files that are required to restore the feature. For more
         information on specifying a source location, see XXXXXX. Error: 0x800f0906
         At line:1 char:1
         + Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell
         + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              + CategoryInfo          : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
              Exception
             + FullyQualifiedErrorId :       DISMAPI_Error__Cbs_Download_Failure,Microsoft.Windows.ServerManager.Commands.AddWindowsF
       eatureCommand
    Any ideas?  I installed this Server Core image on a Hyper-V Virtual Machine (using Generation 2), allocating 4GB RAM and 65GB HDD space.  I haven't done anything with .Net Framework and I haven't configured the network at all.
    Any advice would be greatly appreciated.

    Hi SLONER,
    You need use the -source option on a non-Internet connected machine.
    PLease try the script below:
    Install-WindowsFeature Server-Gui-Mgmt-Infra,Server-Gui-Shell –Restart –Source c:\mountdir\windows\winsxs
    And follow this thread:
    PowerShell to Add GUI to Server Core (ServerCore-FullServer)
    I hope this helps.

  • Why am I having troubles printing from both the Illustrator program and the PDF I save?

    I had a large Illustrator file that was made up of AutoCAD linework of an entire university campus.  The file works fine and I can do anything I please. I made a 24" x 36" artboard and scaled an area to fit nicely.  I also deleted a lot of contours and additional linework so the file size was not so large (went from about 40 mb to 6mb). 
    However, when I go to "save as" and select my artboard and save as a PDF. I open the PDF, which is 2.5mb in size, and it takes about 1 minute because of all the contours going in one by one. After I let it load, I print to my plotter as I do all the time in Adobe Acrobat X and it will bring up the window that says "Flattening" and gives "1%".  After 10 minutes it reches 2%. After patiently waiting 1 hour, something popped up saying Acrobat failed to complete task and needs to close.  Tried several times and it just wont print! I am Beyond frustrated. I even try rasterizing the PDF by opening it in Ps
    Something I note is how my computer is working...that is how it is handling its processes via the task manager.  Both times when I try to print from Illustrator and Acrobat it never makes it because it times out. My 8GB RAM desktop computer reaches max capacity in this process and devotes 6GB RAM specifically to Acrobat or Illustrator as it tries to print.
    What is the deal here?  I have "Save As"ed PDF's from Illustrator hundreds of times and sent them to our plotter from Acrobat.  Is there something going on with my Illustrator File?  I idn't think it mattered if linework was outside of the artboard when I save PDF of an artboard.  I have a lot of layers in the .Il file, but most of them are off and it is just linework, no images or effects being done.
    Any insight would be greatly appreciated.

    Agree with what Scott said. It may just look like single lines but due to how CAD programs construct the visual appearance based on drawing primitives rather than "paths" as it is understood in AI, there could be an awful lot of them in the same place even in seemingly simple drawings. I'm sure you'd see the same performance issue if you attempted to manualyl flattening the file in AI... You will have to go in there and clean it up or even better, clean it up in the CAD program and export it differently from there...
    Mylenium

  • Switching from photographer plan to complete and back possible?

    Hello. A small question.
    I currently have the photography plan (CC+lightroom) which I use daily.
    I am starting a few movie endeavours and also back into simple sites editing, and as a result I am considering switching to the complete edition as adding premier pro and maybe after effect and muse will cost more than the complete bundle. This will for a few months until february, and after that I'm not sure I will continue with it, but if so, I will for the most of the next year.
    So my question is if I do switch to the complete bundle, can I go back to the photography bundle back, remove the apps I don't need, and just stay with photoshop+lightroom bundle as its currently priced? Or it will be more complicated than that?
    I just wants a heads up to know what my options are, should I purchase those apps separately or save money for the complete bundle?
    There is a current 40% off the complete bundle which can also save me some money.
    Cheers.

    TP57 wrote:
    In your case it would be more cost efficient that you would figure our the length of time that you will use premiere pro and after effects.  For example, if you only need to use both products for 2 to 3 months, it would be more economical for you to subscribe to both of these applications on a month by month basis.  On the next year when you know you will need access to all the apps then you can select to subscribe to the individual or business solutions for the complete creative cloud.
    Trust me as this will save you a lot of time in trying to save money by subscribing/cancelling/subscribing on a short-term basis.
    I will need them for about 5 months.
    If I buy them separately, at least premier pro and after effects, I will need to pay 200$/300$ (2 or 3 apps), and if I cancel I will have to pay for about 140$/210$ (50% of remaining 7 months or keep using it for 7 more months).
    If I buy the current available complete package which is currently on a discount for 30$/month for the first year, I will pay 150$, and than pay 105$ if I cancel, and I get everything.
    If I continue for another year, the full price of the complete package for 50$/month will still cost less.
    I just want to make sure I'm not doing a mistake, and if I do cancel the complete package (which is currently the best price), I will still be eligible to buy the photography package (as I don't have a previous CS3-CS6 license).
    If its questionable, I will need to use a different ID to purchase a complete package, which as I understand the EULA, its not allowed (or am I mistaken?).

  • How can I transfer my 'pages' from mac to I-pad and back again?

    Hi, how can I use the 'Pages' on both my desktop  and the I-Pad? I've tried using DropBox but it doesn't seem to work with Pages? Any other ideas?

    This is how it works if your iPad is connected to your Mac and you want to sync back and forth.
    Find the document in Pages on your iPad that you want to transfer to your Mac. Click on the curved arrow icon at the bottom of the window and a dialog box pops up with several options. You can choose any of these options to send the file to your Mac. The third option, the one that I use, is send to iTunes. Tap that icon, select the file type that you want to use for the document (Pages, pdf, .doc) connect your iPad to your Mac, launch iTunes, select your device on the left side of iTunes. Then select Apps in the top of the iTunes window and scroll down to the File Sharing box. Select Pages and then sync. That document will now be transferred to your Mac and you will see it on the right side the box called Pages Documents.
    To go from the Mac to the iPad, (while the ipad is connected to your Mac as described above) select Pages in the File Sharing box, then click on Add in the lower right corner of the Pages document box, select the file that you want to transfer to your iPad, tap the down arrow icon in Pages on your iPad, select Copy from iTunes, and the file name will appear. Tap on that file and it will transfer.
    Message was edited by: Demo

  • Audio exporting problems: from FCP to protool/STP and back again

    --------------------------------------------------------------------------------
    Final Cut Pro sound export for mastering.....sync problem
    Hey,
    I'm editing a 30 minute film and I have done most of the sound edit in FCP and Soundtrack pro and I want to now bring all the sound into pro tools to master the sound but every time i export sound into pro tools it seems to stretch by two or three seconds.
    I have tried OMF, AIFF, XML, and Quicktime audio file sut to no avail!!!!
    There are 50 tracks in the file so it is quiet large. It's not that there are handles of the file also as when I sync the file with the audio track with the video it syncs in one place but it is still out of sync in another.........It's as if the audio has been stretched!?!
    If anyone has any advice it'd be much appreciated
    Keith

    Check the timecode rate and sync options in Protools. It sounds like a timecode or samplerate mismatch.
    Especially note that 23.976fps OMFs from FCP (probably STP as well) show up in Protools as 24fps sessions. Change the PTs timecode to 23.976 to realign.

  • Trouble switching from Mac to windows in boot camp

    Ever since my imac updated early last week I am having trouble switching from the mac side back to windows. Switching fromt windows to mac is fine. I do most of my work on the mac side graphics design but for my job some of the software we use only runs on windows and  this is the side i have to use to clock in and out and do someother work on.
    I am using the option button as I have for the past 3 months and it worked just fine but since this update i am having to try 4-5 times before I am successful. I can do it by shutting down the computer, pushing the option button then turning back on and that seems to work, well it did Friday at least, today its not working again, i am having to try 4-5 times yet again by shutting down the computer then turning back on and i really dont like doing that 4-5 times in a row just to switch back to windows to do one quick thing then switch back.
    any suggestions?
    Thanks for any help!

    To see if it resolves the problem, from Mac OS try setting your chosen boot disk in Preferences -> Startup Disk. You can do the same to go back to Mac OS from Windows in the Startup Disk control panel.

  • I am having trouble printing from my computer. The printer keeps giving me an error message.

    I have an hp officejet 6500A printer, i am having trouble printing from my computer which is an hp windows 7 64-bit  to my computer. I keep recieving an error message on the printer stating that the paper size or type does not match. What do I need to do to get my computer to print to my printer?

    Hi - A couple of things to try.  First, in whatever app you're in, go into File, Print and Printer Properties and set the paper size appropriately.  After that, go into Page Setup in whatever app you're in and set the appropriate size in there as well.  In many cases, this problem is caused by different sizes being set within the printer driver and the app.  If that doesn't work, go back into Printer Properties and try choosing a different paper type (Plain Paper).  I've also had that resolve the problem before.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it

    I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?

    Here's an easy way:
    Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
    Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
    That should do it.
    Clinton

  • I'm having trouble texting from my IPAD. Sometimes it looks like its searching and other times I get a red exclamation point.

    I'm having trouble texting from my IPAD 2. Most of the time it looks like its searching or I get a red exclamation point.
    I was only able to send 2 texts. Help!

    iPads cant send regular texts - only through iMessage meaning that the other device will need to have iMessage too.
    If you can't send a text that means the other person does not have iMessage and iMessage is only installed on iOS devices or OSX Lion

  • I dropped my iphone in the snow and now I am having trouble hearing from it.  I heard that sitting it in rice helps.  True?

    I dropped my iphone in the snow and now I am having trouble hearing from it.  I heard that sitting it in rice helps.  True?

    but if it is already fried that wont let and your going to need to get it replaced

  • Unable to switch from 16 to 24 bit, and no Dolby select

    Hello,? I have tried everything i could find to fix this but i'm at my witts end here. i just recently upgraded my computer from and A8V Delux motherboard so that i could go to PCI-e A8N-SLI Premium. Upon reformatting the Hard Dri've. i could not get the SPDIF to work correctly it'll let me switch from 48 to 96 KHz, and in the Bit Matching section it won't let me do anythign at all. i have links to the screen shots i took of the 2 windows in Audio Console, they are as follows.SPDIFhttp://img.photobucket.com/albums/v3...ight/SPDIF.jpgAnd? the Bit Matchinghttp://img.photobucket.com/albums/v3...itMatching.jpgI'm currently useing the Sound Blaster X-Fi Fatality Extreme Gamer Pro sound card. To show i have read up, i have switch? PCI slots and have even did a complete windows reapir and stil nothing. after searching here on the forum for the 3 days or so i haven't been able ot get them to work. any help? would be greatly welcomed.
    ?????????Thank You.

    ok i installed winamp which uses 24bit audio when enabled, had the CAC set up for entertainment mode. and still could not get 24bit audio. i used SiSoftware Sandra Pro, and did a hardware test on my audio card. which is the Sb Fatality extreme gamer pro. andseachign through all the audio settings it only shows my sound card using 6bit audio. while playign MP3's through winamp. i have no cracking or popping noises just unable ot have 24bit audio coming from the sound card. any idea's. i have tried everythign that has been posted in this thread before i even made my first post to fix the problem. is this a known issue or something. cause it's ticking me off to have paid $45 for a good sound card and not get my 24bit audio and no dolby audio in games. And yes Sandra will show me if i am using 24bit audio as it did before i upgraded my motherbaord, and on my last sound card which was an audigy LS.Here is a link to the pict shows that the max sample bits is only 6http://img.photobucket.com/albums/v3.../soundtest.jpgMessage Edited by WyckedKnight on 0-20-200704:53 PM

  • HT1926 Started having trouble with iTunes so I uninstalled everything and tried to reinstall but it says ' iTunes cannot run because some of its required files are missing. Please reinstall iTunes.'  Well, I've uninstalled and reinstalled 5 times.  Now wh

    Started having trouble with iTunes so I uninstalled everything and tried to reinstall but it says ' iTunes cannot run because some of its required files are missing. Please reinstall iTunes.'  Well, I've uninstalled and reinstalled 5 times.  Now what?

    I figured it out.  A week ago I had downloaded a screensaver from a website I trusted and that's when my problems started. I uninstalled it but that didn't help.  So, I reinstalled it then used an uninstall softtware app that cleanns more than the control panel does. Then I used a computer cleaner to be sure everything was wiped clean.  And it worked.  I downloded iTunes for the 7th time in 2 days and finally it worked!  And I lost nothing from my account.
    Maybe this info will help others.

Maybe you are looking for