Having trouble syncing with my new iPhone cable, keeps crashing and saying that the device cannot be found
The iTunes sync keeps crashing and saying that the device cannot be found. I have bought a new cable recently off eBay and it manages to charge my iPhone when I plug it into my macbook but its not allowing me to sync or import pictures.
iOS: Unable to update or restore - Support - Apple
Similar Messages
-
Hey, I've tried to install the new iOS 7.1 but it says that the installation cannot be completed and doesn't say why. I have more than 50% battery left but it still doesn't work, help?
It probably means you don't have enough available storage on your phone. It takes space to store the download - THEN unpack it. Best method is to use a computer with iTunes (This allows you to back up on your computer as well).
PLEASE: Do not purchase iCloud storage space - this will not give you more room for the iOS 7.1 installation. -
My iphone 4 will not sync with my new macbook air. It says that syncing refused to start. Any suggestions? FYI - all my apps and software are updated.
Thanks,
JodiClose iTunes. On your phone, double tap the Home button to bring up the multi-tasking bar, tap & hold any app until they all start to wiggle & a red minus sign appears. Tap the red minus sign to remove every app shown. Tap Home button when finished. Re-start your Mac, launch iTunes, connect your phone. See if things work now.
-
I'm having trouble syncing with icloud. Please help.
I'm having trouble syncing with icloud. I'm trying to sync my iphone & my new ipad. HELP
go to Settings -> iCloud -> Account make sure you are using the same account on both devices. then you can select what you want synced to the cloud. once you have chosen what you want to sync the devices should update to match each other. this may take a few minutes for the devices to sync up.
-
I am having trouble removing songs from my iPhone. i have unchecked songs in the library on my mac, but they still show up on phone after syncing. how do I remove them?
Hi asims01,
Welcome to the Support Communities!
The information below may be able to answer your questions about how to delete songs from your iPhone:
Deleting songs downloaded to your device
Tap the Music app.
Tap More > Songs at the bottom.
Scroll or search for the song you would like to delete from your device.
Swipe right to left on the song, and then tap Delete.
Note: You must be in Artists, Songs, or Albums view to delete songs from your device. Deleting from a playlist won't remove a song from your iOS device.
Also, this information can be found on page 64 of the iPhone User Guide for iOS 7
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Remove a song from iPhone. Tap Songs, swipe the song, then tap Delete. The song is deleted from iPhone, but not from your iTunes library on your Mac or PC, or from iCloud.
If you have iOS 7, this will delete the song from local storage, but the song will still appear with a cloud symbol in the Music app, as you've noticed. To hide the iTunes in the Cloud purchases, navigate to Settings > iTunes & App Store, and disable "Show All: Music”
There may be a few orphaned songs on your iPhone that were partially downloaded or corrupted in some way. If that is the case, you can erase all of the music from your phone. Follow the instructions below and select the Music app under Usage:
iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/ht1867
I hope this information helps ....
- Judy -
Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)
You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.
-
I bought an iphone 4. I have a MacBook Core Duo running 10.4. My husband has a Core Duo 2 running 10.5.8. Is there a way to move my ical and address book info. to his computer so I can sync with my new iphone without upgrading software.
Hello hbell,
is there any reason that you do not want
to upgrade to v10.5.? Suggest you call
1-800-275-2273 Apple Support. Automated call
yet if you call back you can get in touch with an
Apple Software Specialist. They may be able to ship
you Leopard so that you can synch your new iPhone
to you own computer. Have the serial numbers of your
Mac and iPhone written down and ready for them.
As far as transferring data to your husbands MacBook
so that you can sync your iPhone on it I am really not
sure. Seems like a lot of trouble to get your data onto
your iPhone.
Good Luck,
A -
I loaded the new iTunes (11.0.0.163) on my computer and also just purchased a new iPhone 5. Prior to loading the NEW iTunes, I was able to sync with my new iPhone 5. After I loaded the new iTunes, I now get an error message: 0xE8000084. What's up?
Also, it says the iPhone 5 is not registered to my Apple ID.See if the troubleshooting for 0xE error codes on this page helps : http://support.apple.com/kb/TS3221
-
calendars are not syncing with my new iphone 5s. Just ran the diagnostics and all systems checked ok
Hello jricks8
Check and see what calendar it is being added to. You may see it something that is local to the iPhone or another sync service that is not setup on your computer. Check out the page below to find out more information to sort you out.
Use multiple calendars
http://help.apple.com/iphone/7/#/iph3d1110d4
Calendar settings
http://help.apple.com/iphone/7/#/iph3d11102c
Regards,
-Norm G. -
Its not a simple baud-rate or parity error. If I issue the command to send data (X1) in hyperterminal I start to get data. If I then switch to Labview I still get data. However if I try to issue the send-data command via Labview I get nothing (i.e. I can read from the device, but not write to it).
I am on a Windows 98 (version 2) PC, running Labview 5.1.1Try adding a carraige return to the end of your command.
"djb" wrote in message news:[email protected]..
> I'm having trouble communicating with a transducer (Keyence LS-3100
> laser scan micrometer) via the serial port. It works in
> Hyperterminal. Any suggestions?
>
> Its not a simple baud-rate or parity error. If I issue the command to
> send data (X1) in hyperterminal I start to get data. If I then switch
> to Labview I still get data. However if I try to issue the send-data
> command via Labview I get nothing (i.e. I can read from the device,
> but not write to it).
> I am on a Windows 98 (version 2) PC, running Labview 5.1.1 -
If I restored my new iPhone from iCloud backup, and I delete the old iPhone backup to make room on iCloud to back up my new phone, will it delete everything on the new phone?
I have this exact same issue. Replaced my iPhone 4s with the new iPhone 5s, setting up my new iPhone 5s to restore from iCloud. This completed and now I am unable to delete my old iPhone 4s iCloud backup (consuming 15.1 GB of my 20GB allocation). How can I delete it, so that I get my 15 GB back? I am not going to invest in additional iCloud storage, because I will be 15 GB down from the off.
-
I am trying to restore my Iphone but get a message that reads "The Iphone "Iphone" could not be restored. The device cannot be found.
Can anyone help?
Thank you.That screen indicates that you need to connect the iPhone to your computer with the USB cable and restore from iTunes
Allan -
When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?
The problem has been fixed with the most recent OS X software update.
-
When will the Apple stores carry 30 pin dock extensions or cables so I can use my iPad with a recessed iPod dock? It's unfortunate that the device is rendered unusable.
No one here is an employee or representative of Apple. We are all users like yourself. We cannot know when or if Apple will release any additional products.
You can leave feedback to Apple about the iPad here:
http://www.apple.com/feedback/ipad.html -
Having trouble downloading magazines on newsstand. I keep getting a message that says can't connect to server on all magazines
Hello bigblue8
Check out the following articles for troubleshooting access to the iTunes Store. The first one will probably get you started enough to get it taken care of. If it does not the follow up article should definitely solve it for you.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Maybe you are looking for
-
How can i get an account itunestore in mexico??
if any one knows how can i get an account in mexico. i've been looking and mexico dont appear in the list of countries of itunes store.. tks. MACBOOK Mac OS X (10.4.8)
-
Questions on one of my first programs for school
I am taking an intro to Java class and I am in need of some help. I am not looking for anyone to do the work for me just to help me figure out what I am missing and get me back on track. Here is what the program is I am suppose to write: Write a Java
-
Canl connect mac book pro to tv bravia wireless
can l connect mac book pro to tv bravia wireless
-
Problems opening ports for Torrent downloads
Is there a how to guide or anything out there on how to properly open and forward ports....for something like a Torrent client? I thought I was doing everything right, but I still can't get my client to connect to any trackers. This is what I've done
-
Oc4j and ejb3.0 as web services
Hi, I have deployed a ejb3.0 jar with following files. Interface : package samples.webservice; import javax.jws.WebService; *@WebService* public interface HelloRemote public String echo(String input); Bean package samples.webservice; import javax.ejb