Having trouble to keep internet connection constant, airport keep diconnect

I just re-install my Mac Os 10.5.2 after 1 year of using my Mac book. Since the re-installation, my airport has become very unstable, it connect to the internet for a few minute then disconnect, i have try to reset the "SMC", but the problem is still here.
Before the re-installation, the airport was also disconnecting but more rarely than now.
The time the airport remain connected is between 1 to 4 minutes, then disconnect.
To use internet after it disconnect, I have to switch off the airport then on again, used for another minutes then again back to on/off process.
I would like to have some hints how to solve the problem permanently . Thanks

HI and Welcome to Apple Discussions...
Try updating your system software to 10.5.8.
10.5.8 Combo Update Download
Run Disk Utility and repair disk permissions before and after the installation.
Carolyn

Similar Messages

  • Internet connection via Airport Extreme/router thats not working, why?

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

  • I upgraded Lion recently to 10.7.3. Since that time I am having trouble with my wireless connection. All other devices are fine, but I keep losing the connection since the upgrade.

    Recently I upgraded Lion to 10.7.3. Since that time I have been having a lot of trouble with my internet connection. I keep losing the connect and have to go to diagnostics and turn it back on. Is anyone else having this problem?
    Thanks, Pat

    I'm afraid there are numerous threads on here discussing this problem. I posted in this one earlier that has a couple of suggestions, but the real solution will hopefully be provided in an update from Apple:
    https://discussions.apple.com/message/17589686#17589686

  • A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline

    When I select “Update existing software in QuickTime Pro I get an error message saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
    This has persisted for several weeks. Any help will be welcomed as I do not know how to contact QuickTime support via Apple.
    I am using Windows 7 64 bit.  
    Many thanks

    I was able to download and install the latest version of iTunes  (10.6.3.25) without a hitch. After the reboot I tried again to update my exisitng Quicktime Pro software as described in my original posting and got exactly the same error message.
    If it happens that there is no software to download because I am already running the latest version, surely a message to that effect would appear and not the one saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
    Still seeking advice if possible
    Cheers

  • Slow internet connection via AirPort on MacBook running 10.5.7

    The internet connection via AirPort on my MacBook is frustratingly slow, and I have no idea why.
    I have an AirPort Extreme connected to a Virgin Media cable modem, a new iMac and a two year-old MacBook, both running 10.5.7. No problems at all with the wireless connection on the iMac - I get the full near-10Mbps download speed I'm paying for, despite the fact it's at the other end of the house. Not so on the MacBook, where I get barely 2Mb, even if I'm sat next to the router.
    I've had other AirPort problems since the 10.5.6 update - notably one common to a lot of people on here, it seems, of the AirPort dropping the wireless connection every 2 mins. This was only 'fixed' by the fairly drastic workaround of essentially abandoning my user account and connecting via a different one.
    For the slow internet problem, I've tried resetting the PRAM, turning off my cordless landline phone, changing the wireless channel - to no avail. I can't test the wired connection as my MacBook doesn't recognise my Ethernet port, it would seem, and hasn't for a long time.
    Can anyone help? Thanks in advance.

    For the slow internet problem, I've tried resetting the PRAM, turning off my cordless landline phone, changing the wireless channel - to no avail. I can't test the wired connection as my MacBook doesn't recognise my Ethernet port, it would seem, and hasn't for a long time.
    I assume that you meant NVRAM as PRAM is not used with Intel-based Macs. Regardless, network settings are not stored here and resetting it won't really help. The fact that your MacBook is not recognizing the built-in Ethernet port is telling me that may have an issue with the system board ... that may be showing up as poor performance with the AirPort as well. I suggest that you take your MacBook in to your local Apple Store to have them take a look.

  • Slow internet connection via AirPort on MacBook under 10.5.7

    The internet connection via AirPort on my MacBook is frustratingly slow, and I have no idea why.
    I have an AirPort Extreme connected to a Virgin Media cable modem, a new iMac and a two year-old MacBook, both running 10.5.7. No problems at all with the wireless connection on the iMac - I get the full near-10Mbps download speed I'm paying for, despite the fact it's at the other end of the house. Not so on the MacBook, where I get barely 2Mb, even if I'm sat next to the router.
    I've had other AirPort problems since the 10.5.6 update - notably one common to a lot of people on here, it seems, of the AirPort dropping the wireless connection every 2 mins. This was only 'fixed' by the fairly drastic workaround of essentially abandoning my user account and connecting via a different one.
    For the slow internet problem, I've tried resetting the PRAM, turning off my cordless landline phone, changing the wireless channel - to no avail. I can't test the wired connection as my MacBook doesn't recognise my Ethernet port, it would seem, and hasn't for a long time.
    Can anyone help? Thanks in advance.

    help...same here (mostly)
    eight core macpro on the same wireless network (10 feet from extreme base station) as my macbook pro (2008 top of the line)
    everything updated. the macpro is just fine with the internet, the macbook pro is horribly slow.
    tried downgrading firmware on the airport...no difference.
    help!!
    Message was edited by: leino88
    Message was edited by: leino88

  • Problems sharing internet connection over airport

    Hi everyone-
    I've researched the heck out of the forums and still cant figure out what's happening with my system. I've got a MacBook Pro with OS 10.5.2. In previous OS versions (10.4) when I was successfully sharing my ethernet internet connection, the airport icon in the status bar showed a vertical "up" arrow, indicating that my connection was being shared.
    I'm trying to do the same thing in OS 10.5.2 but not succeeding in getting the same notification. I'm finding that when I access the "Sharing" folder under "System Preferences" and select "Share your internet connection from: ethernet" and "To computers using: Airport" that both settings grey out, the "Internet Sharing" button turns green and the status says "On", but no sharing occurs. I've checked using other wireless laptops and a wifi finder, but no signal from my MacBook is ever found.
    I've deleted my preferences folder to start fresh, no help. I've tried sharing from different ethernet sources, no help. It just feels like the problem is in the OS somewhere, not with the internet connection.
    Any insight or help would be greatly appreciated! Thanks!

    seems like i got the same issue as u and i just posted it:
    http://discussions.apple.com/thread.jspa?threadID=1425809

  • Problems sharing internet connection through Airport with a PS3

    Does anybody know how to share an internet connection wirelessly with a PS3? I've tried everything including following directions from the tech support people from both Sony and my ISP (Verizon) and nothing works. Last time I've talked to Verizon I've obtained a IP number from them as Sony recommended and that did not work either. Is anybody out there with a PS3 sharing the internet connection through Airport successfully? I'd really appreciate any help. Thanks.!!
    Message was edited by: pbranda

    Let's double-check your Mac's Internet Sharing settings ...
    To setup for Internet Sharing (Wired to Wireless):
    Setup the Network
    Cable Modem > (Ethernet cable) > \[Ethernet port] Mac > (wireless) > PS3
    Enable Software Firewall
    System Preferences > Security > Firewall
    o Block all incoming connections (enabled)
    Enable Internet Sharing
    System Preferences > Sharing
    o Select "Internet Sharing" from the options in the left column
    o Share your connection from: Built-in Ethernet
    o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
    AirPort Options...
    o Network Name: <anything you want>
    o Channel: Automatic
    o Enable encryption (using WEP) (optional)
    o Password: (optional)
    o Confirm Password: (optional)
    o WEP Key Length: (optional)
    o Click OK
    o Select "Internet Sharing" again
    o Click "Start" to start Internet Sharing
    o Click Start

  • I am having trouble with the initial connection. I have isolated the problem to the cable/ connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

    I am having trouble with the initial connection of the apple tv. I have isolated the problem to the cable/connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

    There are only two types of HDMI cables (standard and high speed - listen to all 1.2, 1.3 etc etc nonsense they will try to tell in the store) both types will work with the Apple TV.
    The cable may be faulty though, have you got another to try, what exactly is happening.

  • I am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

    i am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

    I had a similar problem.  Here is how I resolved the issue.
    1.  Remove Network Connect
    2. Run Terminal and remove /usr/local/juniper and everything within the juniper directory.
    3. Reboot the machine and reinstall Network Connect
    4. Test if you can now connect.
    During removal, you may encounter permission denied error, you will need to change the permission to 777.  For example "sudo chmod 777 nc".

  • I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

    I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
    After +/- 10 to 15min my connection is gone.
    Does anyone have a sollution?

    Lots of people are having the same problem, you're not the only one, belieeeeve me.
    Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
    It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
    So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now.  I already posted  a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
    i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
    Site:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

  • Having trouble maintaining remote desktop connection with Mavericks.  What is this about needing RDC 3.7.1 with Mavericks.  I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed.

    Having trouble maintaining remote desktop connection with Mavericks.  What is this about needing RDC 3.7.1 with Mavericks.  I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed

    Lucky you, it did not work for many users (which as it should be) so MS produced a new version, for ML and Mavericks.
    It's in the App Store, for free.
    FYI, I assume that you were attempting to post a picture, no one can see it (except maybe you) because it is on your computer rather than the forum server.
    file:///Users/dbrant/Desktop/About%20Apple%20Remote%20Desktop%203.7.1.webloc
    Use the small camera icon in the editor toolbar to post it.
    It also looks like you attempted to use Apple Remote Desktop, which does not do Windows.

  • Having trouble with screen saver connecting to my photos?

    Having trouble with screen saver connecting to my photos?

    I will try that, but isn't Skype supposed to work without headphones? Why does it work with ichat when I talk to my friends with macs?
    S

  • HT4972 I am having trouble downloading iOS 5 connected to my laptop.  Says I don't have network connection but I do.

    I am having trouble downloading iOS 5 connected to my laptop.  Says I don't have network connection but I do.  Please help.  I purchased tv programs and it is telling me I need ios5 to watch and I downloaded it to cloud but have to have this app also.  On my iPad I don't have an updates button under settings like I have seen other iPads have.

    You only have the option if you are already running iOS 5 already. If you are trying to update to iOS 5, you have to use iTunes on a computer to update the iPad.
    Here are the instructions.
    http://support.apple.com/kb/HT4972
    Or you can connect the iPad to the computer, launch iTunes. Select the iPad under the devices heading on the left, click on the Summary tab and then click on Check for Update
    http://support.apple.com/kb/HT1414
    If you are having problems with the download, try disabling your firewall and anti virus software until after the download completes.

  • Problem with not getting Internet Connect on AirPort Express

    Problem with not getting Internet Connect on AirPort Express (version7.6.4). Error says cannot get valid IP address. Have reset Siemens SpeedStream 4100 several time, even with tech support from the big "A" DSL provider. Plug MacBook Pro directly into modem and works fine. Unplugged AirPort, even reset it, still no luck. A bad Express?? or am not looking in the right place to make connection. Was working fine up until Sunday.

    Connect the AirPort Express (AX) to the cable modem via Ethernet cable.
    In configuring the AX using AirPort Utility:
    Under Internet, set the connection to be Ethernet using DHCP.
    Under Connection Sharing, set it to distribute a range of IP addresses.
    Under AirPort>Wireless, set the Wireless Mode to Create a wireless network, and fill in the remaining settings in the same window. Until you get it working, you might want to set Wireless Security to None.

Maybe you are looking for

  • Dynamic sql and bind variables

    Hi, I have a stored procedure which filters a table on 5 five columns. The filters come from the input parameters, and these 5 parameters can come in any combination, I mean some of them may be null and some of them may not be null. So I constructed

  • Dynamic taxes and charges of Purchase Order

    Hi We have the following issues in purchase order: The discounts offered by vendors vary from PO to PO. Sometimes the discounts are applicable on basic price and in some cases it is applicable on the price after some charges/taxes. This is not feasib

  • ISight & ViewSonic Monitor's Built-in Mac-incompatible Webcam

    I just bought a ViewSonic Monitor. Spent a LONG time with their Tech guys trying to get the built-in Cam to work. No luck. But a Supervisor said he "had seen a 3rd party app used on a Mac to drive the Cam." I've never used one. Will iSight solve the

  • Why did the Mozilla Plugin Check page stop working?

    This morning I updated to Firefox 18.0.2. Then because of the java stuff that has been going on, I went to update to the latest version. I uninstalled the old Java and installed the new. Then I went to the plugin check page to make sure everything wa

  • BW Administration Docs

    Hi I am an rookie in basis administration and I got a chance to prove my self to work on BW and SCM administration, can some one  please help me out in getting some information on this i.e.. how the administration differs from Basis to BW what are th