Having trouble transfering a video onto the regular ipod

im having trouble putting a video on my ipod. i tried to transfer it, but it said it wasnt able to be played on the ipod. please give me a reply.
thank you

Check that your video drivers are up to date.

Similar Messages

  • I just got a used Canon ZR850 and I'm having trouble downloading my video onto my Windows 7 computer

    I just got a used Canon ZR850 and I'm having trouble downloading my video onto my Windows 7 computer. I have a FireWire that works fine with my ZR830 but not with the 850.  The connection isn't registering.  What can I do?

    Without proper system information and other details nobody can help you. and this error means what it says - some other install process is still active, even if it may not do so visible. Could be a silent update of a virus scanner or something, could be a botched install of another program, not even specifically Adobe. As a start, always reboot your computer and then try again. For anything else we need much more info.
    Mylenium

  • I am having trouble looking at video podcasts on my ipod touch. they are all greyed out. I have tried removing them and resyncing. this did not work. any ides?

    I am having trouble looking at video podcasts on my ipod touch. they are all greyed out. I have tried removing them and resyncing. this did not work. any ideas?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all media and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • I am having trouble transfering my video to dvd? what could be the problem

    I am having trouble transfering a movie to filmed to a dvd? the program final cut quits during the process? What else can i do to record video on a dvd?

    Try here:
    https://discussions.apple.com/message/21774870#21774870
    Al

  • How do i get videos onto the new ipod?

    haven't been able to figure out how to get videos onto the ipod. tried to click and drag a home video into the video section but that didn't work. any help would be greatly appreciated.
    also, where do i go to get an episode to download onto the ipod?

    Hi Sebastian,
    Use iTunes to put videos onto your iPod. Make sure you have the newest version (by pressing Help, then selecting check for iTunes updates).
    Once you are sure you have the newest version of iTunes, just press File -> add file to library, or drag your video file onto the iTunes library. Then all you need to do is update your iPod.
    - Greg.

  • Having trouble transferring 4s data into the 5c

    I am having trouble loading my 4S data and info into my new 5C

    the old phone has the encryption password enabled and i cant get rid of it.
    as soon as i connect the new phone, and choose the old back up, it asks for the password. no idea. ive tried every password i know.

  • Sony just isn't helping me. I'm still having trouble transferring my NX3 video files.

    Well, I'm still having trouble transferring my NX3 video files to my editing software.  Sony suggested using the Sony Content Browser but that doesn't work. Sony just can't seem to help me. If the scene shot on the card is longer than 10 minutes, 4 frames of audio is lost from each file.  So if you shoot 60 minutes straight (say a wedding, you loose audio every 10 minutes)  I guess this doesn't sound important, unless it happens just as the bride is saying "Yes" in her vows.
    My original post is as follows:
    Sony NXCAM (NX-3) drops audio tracks when importing into FCPX and Premiere.
    I called Sony on Feb 13, 2015. I spoke with Doug (case no. 661972). I've been using my NX-3 for about 3 months. I'm still testing Sony NX-3. Looking for a way to transfer the video and audio without dropping audio frames. I didn't catch it at first, I mean it's only a few audio frames. It seems to happen with files over 12 minutes shooting. It seems that I can't upload the video/audio shot in my NX-3 to either my iMac (using FCPX nor Premiere) nor can I upload it to my PC (using Premiere) without 3 to 6 audio "frames" being dropped. When I spoke with Doug at Sony, a person I've actually spoke with in the past, he seemed frustrated. I was speaking with him as a professional and was attempting to find a solution, he was being protective and wanted to place blame at other companies. He stated that the camera played back the files correctly so it isn't a Sony problem. I explained that it is a problem for all of us if we choose Sony as our purchase. He told me "you should all buy Canons next time." That kind of through me. How do you speak to that. I explained that I am just looking for a solution and he told me to call the software and computer companies. Doesn't Sony realize that just because the camera works, that isn't the end of the road. You need to put the video into a devise to edit the video. I asked him what software would he recommend to a professional to use to edit footage taken by the Sony, he no reply. All I received from Doug was a really bad feeling about Sony. I've been a Sony "shooter" for over 34 years. I still can't believe the way I was treated. Not sure now what path I will take with this. But I surely need to tell everyone (all of my associates who have been asking me how I like my new camera) what response I received from Sony. Buy a Canon. By the way, I asked if Sony might have another camera of the same type that didn't drop audio. Doug didn't know. Really strange. Is Doug not happy with his prosition with Sony? 

    Auto Correct:
    As far as I'm aware this cannot be turned off. Someone may prove me wrong on this point
    CDDB Update:
    Again, as far as I'm aware this cannot be done. You could use WMP to update the files then import them into iTunes.
    Music Deletion:
    iTunes seems to only ask you if you want to delete a file if the file is located in its library folder. In the Preferences>Advanced>General section try changing your iTunes Music Folder to the folder where all your music is stored and it should ask you if you want to move files to the recycle bin when you delete them.
    Library Update:
    This is a feature I with iTunes would introduce. When you delete or move a file iTunes loses track of it. What it needs to be able to do is first check to see that all the existing files in the library are still there, and remove the ones that aren’t, then it needs to search for new tracks.
    It can search for new tracks but if you have renamed a file, then it will be in the library twice, one is the old file (which will no longer play because it doesn’t exist) and the other is the new file.
    The way I now avoid iTunes annoyances in relation to file names and folder organisation is I let iTunes sort it all out for me. Selecting "Keep iTunes Music folder organised" and "Copy files to iTunes folder when adding to library" will get iTunes to sort your music into Artist folders, then within the Artist folders are Albums, then within the album folders are the actual files, which are named Track Number Artist. For example Coldplay - Clocks will be named 05 Clocks.mp3.
    WARNING: Selecting "Keep iTunes Music folder organised" will copy all the music in your library to the iTunes Music folder. You must have enough Hard Disk space to do this.
    ...that wound up longer then I thought it would. Hope you can make sense of it all.
    Cheers,
    Ben

  • Im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI.  I have the most success with the following operations in this order:
    1)  Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
    2)  Plug the mini displayport end of your new super-cable to the computer.
    3)  Plug the HDMI end into your TV.
    4)  Switch inputs on your TV to the proper input.
    5)  If still nothing on the TV, try a different HDMI port on your TV.
    Hopefully this helps!  Good luck.

  • I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network.  The connection was interrupted and the time was over 24 hours.  Is there a better way to do this?  I'm using Migration assistant.

    I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network.  The connection was interrupted and the time was over 24 hours.  Is there a better way to do this?  I'm using Migration assistant.  The lack of an ethernet port on MacBook air does not help.

    William ..
    Alternative data transfer methods suggested here > OS X: How to migrate data from another Mac using Mavericks

  • I'm having trouble transferring the songs on my ipod to my HP computer. Everytime i authorize the computer to allow the songs to go on, it doesn't do anything. Then I authorize it again and still nothing has changed. Any suggestions?

    I'm having trouble transferring the songs on my ipod to my HP computer. Everytime i authorize the computer to allow the songs to go on, it doesn't do anything. Then I authorize it again and still nothing has changed. Any suggestions?

    Was the content purchased from iTunes?  If not, it will not transfer.

  • I've got the labview vi written to read my IMU data from a serial port in COM1 and it displays onto the table on the front panel. I'm having trouble getting this data onto an excel spreadshee​t. Any ideas?

    I've got the labview vi written to read my IMU data from a serial port in COM1 and it displays onto the table on the front panel. I'm having trouble getting this data onto an excel spreadsheet. Any ideas? Right now my data will collect one reading instead of continuously reading my IMU which displays data in a continuous stream.
    Thanks
    Attachments:
    Read_IMU_Drew.vi ‏21 KB

    Hi
    Your vi is in 2009 version, which i am unable to open in 8.6
    However, if you want your data to be saved in excel sheet, here is the VI
    Somil Gautam
    Think Weird
    Attachments:
    save to excel.vi ‏12 KB

  • I am having trouble transfering any media from my windows 7 pc to my iPad 3. Currently using the latest version of iTunes n my windows pc but still the media won't appear on my devicewhen being transferred..

    I am having trouble transfering any media from my windows 7 pc to my iPad 3. Currently using the latest version of iTunes n my windows pc but still the media won't appear on my devicewhen being transferred..

    The window would open and I would get the hourglass cursor suggesting something was happening, but the Apple home page (default from the install) would not load, nor would any other page I tried (google, yahoo, cnn).
    Even though it's about a different application, I'd try the following document with that:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    (Safari uses the same webkit engine to render web pages as iTunes uses to render the Store pages. So an issue that can cause the iTunes Store to blank can also cause a Safari for Windows application on the same PC to produce blank pages.)

  • I am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

    i am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

    Looking up your camera online, I found it is capable of 1920 x 1080 Full HD 60p Recording. It's the 60p (60 frames per second Progressive) that's the problem I think. iMovie '11 will do 60i (Interlaced). You might need to convert it from the format the camera currently uses into another format to get it into iMovie. Read more about it on this link here: How to import 60p footage From that message thread comes the recommendation to use ClipWrap to convert the camera's video clips now that they are in 60p:
    Tom Wolsky
    Re: How to import 60p footage 
    Aug 17, 2011 12:40 PM (in response to ptburnett68)
    Use ClipWrap to rewrap to QuickTime. Import the files. Edit in either 59.94 or 29.97. The latter if you want to use the high frame rate for slomo

  • HT1657 i've been having trouble transferring my rented movies to my iPad. It keeps showing up as already transferred to another device, although i've only been trying to transfer to the one ipad that i have. Any suggestions?

    i've been having trouble transferring my rented movies to my iPad. It keeps showing up as already transferred to another device, although i've only been trying to transfer to the one ipad that i have

    I know of no solution except for restorng the iPod to factory defaults/new iPod. Have you made a suggstion to Apple to all resetting email autofill?
    Apple - iPod touch - Feedback

  • I have an older IPOD that I'm having trouble getting new purchases on to my IPOD. I use to have a source list on the left hand side of screen where I dragged my purchases to and they downloaded.  Can't find place to check manual vs. auto sync.

    I have an older IPOD classic that I'm having trouble getting new purchases from library to IPOD. I use to have a IPOD icon in the source list on the left side of the screen. Now that is all gone. My purchases are coming up as recently purchased but can't figure out how to get them transferred to IPOD.  I also can't find how to confirm setting is for manual not auto sync as the first computer I had blew up and am now using a different one. I haven't had any of these problems prior to the updates.

    G'day Mate,
    As an avid flight simmer I bought a new soundcard my previous was
    an audigy 2 platinum ex with an external module I really liked but somehow all of a sudden I was getting a screech when using FS9 sor I opted to change to the present. Well stone the crows my soundcard was auto updated with new drivers and well you guessed it the soundcard did not show in the sound video controllers window No I have just joined this forum and it looks like3 you may have the answer for me . I am now going to do as you suggest and see what happens.
    I shall return with the outcome of my dilemma.
    Many thanks for your sound advice ( pardon the pun)
    Pat
    Ret'd Viet Vet

Maybe you are looking for

  • Playing audio podcasts from my iPod on TV

    I have no problem playing video podcasts from my iPod on TV, using the Apple AV cable and a scart adapter. However, when I play an audio podcast, I hear the audio on the TV, but I don't see the accompanying visuals that are part of the audio podcast.

  • IPhone 5 LTE full service but no internet in ONE spot

    Hello, I live in San Francisco, have an iPhone 5 and LTE service and I get great coverage all over the city: at home, at work, which in in a basement of a huge concrete building, and lots of other place. However, there is this one area of the city th

  • Trouble syncing after reloading windows xp

    I reloaded windows xp and redownloaded iTunes. Now it wants to sync and erase my iPhone. iTunes thinks it is a new computer. Is there a way around this?  Thanks.

  • Type 2 JDBC driver

    Does anyone know of a type 2 JDBC driver for MS SQL Server?

  • Confusion about how JSP application compile

    Hi, I am develop a web application using JSP. The application includes many .jsp files and many JavaBeans files in order to accomplish multiple tasks. I feel confused that how all this jsp file and JavaBeans compile together. For say, if the user wan