Having trouble upgrading and downloading all aps!
Need help uploading and downloading aps!
Don't navigate to it directly in the store.
Tap the Purchased tab at the button and download from there.
Are you signed in:
Settings > iTunes & App Stores
Similar Messages
-
Having trouble upgrading after downloading the program
it tells me to upgrade the download goes successfully,buy then it takes me back to the upgrade screen again.
Download the program here http://mozilla.cdn.leaseweb.com/firefox/releases/8.0.1/win32/en-US/Firefox%20Setup%208.0.1.exe
after download is complete click twice "Firefox Setup 8.0.1.exe"
if your homepage is set to "www.google.com/firefox" set it to "www.google.com" -
I'm having trouble upgrading to ITunes v12.0.1 with
Win 7. Download progress bar stalls and eventually cancels itself. Have tried
Tools --> Download Only, but same result. Have been using iTunes for 3+
years without difficulty; I have lots of ram, hard drive and speed.
Thanks for your inputOne step listed in the link to "helpful" info, was (when Iooked 30 seconds ago), to search for and download the newest version of iTunes. I'm running iTunes on Win 7 machine and was prompted to update today, 10.22.2014, and did so without a problem. Having said that, however, it looks as though the latest iTunes (12.0.1.26) is finally doing what the last version refused to do, which is to actually fully populate all my playlists on my 6, but there is a hitch: 12.0.1.26 will NOT allow you to show the sidebar unless you click on "playlists," that is, you cannot keep it open all the time.
And, when plugging the 6 into the computer, the phone icon shows up but clicking on it does nada. What does work, for some strange reason, is clicking on the tiny icon (just under the "Store" menu link at top screen) which looks much like a tiny barrel, someone's idea of external drives, I suppose. The phone then comes up, with the list of stuff on the phone just under it where the sidebar used to be. Sync is now restricted to the lower right of the screen.
Apparently, you will also need to update your iPhone's software as well; some friends with the 4 and 4s, however, had troubles with them after upgrading. The message from Silicon Valley (I can see Apple from my backyard, ha ha) is apparently, "keep upgrading," folks, get rid of those old phones. -
I am having trouble upgrading to maverick after meeting all specs and requirements
I am having trouble upgrading to maverick after meeting all specs and requirements
Are there any symptoms, errors or diagnostic messages related to the failure?
-
im having troubles trying to download desktop apps, the blue wheel still spinning in the app tab, i've already try the solutions i've read here, uninstall CC and installed it again, uninstall it, download it again and install ir, and nothing works, I'm worried because i have a course of some software tomorrow (oct 10). I have a mac, and it has all the system requirements. Can someone help me please?
I think I had the same problem. I've also tried a lot but I found my way out.
Follow every step of this:
Creative Cloud Help | Install, update, or uninstall apps -
HHi having trouble viewing a downloaded file from a site my iPad is telling me I don have a app to open file . And have downloaded loads of apps and still no joy . Have tried this on my android phone to and still nothing. Please can anyone help as slowly going crazy. Thanks tim
What type of file? From what site? What Apps have you downloaded for it?
Perhaps if you provide details of what you are doing we can provide more precise help. -
Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?
Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply. -
Having trouble upgrading WLS to 10.3.2
Hi guys,
I'm having trouble upgrading the domain which is created in a prior release of weblogic to 10.3.2.
I tried to start the server and it prompted me with the option of upgrading. But somehow failed to do the upgrade.
Here is the detailed log...:
<May 9, 2011 8:17:25 PM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.1-1
-133393-1.6.0_20-20100512-2126-linux-x86_64 from Oracle Corporation> ration> tion>
The domain being started was created in a prior release and is being started with WebLogic Server 10.3.2.0 software. WebLogic Serve
will attempt to backup this domain and upgrade the domain to WebLogic 10.3.2.0 format. If the domain contains WebLogic Workshop, Por
tal, or Integration elements, the procedure should be aborted and the WebLogic Platform upgrade tool must be used to upgrade the dom
ain.d to upgrade the domain.pgrade the domain.r release and is being started with WebLogic Server 10.3.2.0 software. W
Do you want to continue [y/n]?: y
<May 9, 2011 8:20:23 PM GMT> <Info> <Management> <BEA-141200> <Detected a domain which was createdf
rom an earlier release of WLS. The Domain will be upgraded to the current 10.3.2.0 release.> lease.> ase.>
Calling Wizard framework for upgrade: args2: [-mode=silent, -file=wcf/plugin_silent_wizard.xml, -p:plugin:plugin.silent.response.fie
=weblogic/upgrade/domain/responses.xml, -log=stdout, -p:plugin:plugin.executionPlan.file=weblogic/upgrade/domain/execplan.xml, -p:pl
onfiguration to: 8.1
<May 09, 2011 8:20:25 PM GMT> <INFO> <Upgrade> <BEA-800000> <If not present, set the source WebLogic Configuration to: 8.1>
<May 09, 2011 8:20:26 PM GMT> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /opt/fedex/ccii/weblogic/ccii-mem-sip/bin>
2011-05-09 20:20:26,215 INFO [execute] com.bea.plateng.wizard.plugin.LogMessageObserver - Domain directory selected: /opt/fedex/ccii/welogic/ccii-mem-sip/bin PM GMT> <INFO> <Upgrade> <BEA-800000> <If not present, set the source WebLogic Configuration to: 8.1>
<May 09, 2011 8:20:26 PM GMT> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /opt/fedex/ccii/weblogic/ccii-mem-sip/bin>
<May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Server Names in this directory: [MemL1SIPServer1]>
2011-05-09 20:20:28,212 INFO [execute] com.bea.plateng.wizard.plugin.LogMessageObserver - Server Names in this directory: [MemL1SIPServr1]ay 09, 2011 8:20:26 PM GMT> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /opt/fedex/ccii/weblogic/ccii-mem-sip/bin>
<May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Server Names in this directory: [MemL1SIPServer1]>
<May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Current domain version 8.1.4.0 will be upgraded to 10.3.2.0.>
2011-05-09 20:20:28,212 INFO [execute] com.bea.plateng.wizard.plugin.LogMessageObserver - Current domain version 8.1.4.0 will be upgradd to 10.3.2.0. 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Server Names in this directory: [MemL1SIPServer1]>
<May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Current domain version 8.1.4.0 will be upgraded to 10.3.2.0.>
<May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Preparing to select optional actions>
2011-05-09 20:20:28,261 INFO [prepare] com.bea.plateng.wizard.plugin.LogMessageObserver - Preparing to select optional actions
<May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Preparing to select optional actions>
<May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Admin Server exists in this directory. Configuration will be written out laer.>1-05-09 20:20:28,261 INFO [prepare] com.bea.plateng.wizard.plugin.LogMessageObserver - Preparing to select optional actions
2011-05-09 20:20:28,283 INFO [execute] com.bea.plateng.wizard.plugin.LogMessageObserver - Admin Server exists in this directory. Configration will be written out later.NFO> <Upgrade> <BEA-800000> <Admin Server exists in this directory. Configuration will be written ou
<May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Admin Server exists in this directory. Configuration will be written out laer.>guration will be written out later.
2011-05-09 20:20:28,287 FATAL [execute] com.bea.plateng.wizard.WizardController - Uncaught Exception
java.lang.NullPointerException
at weblogic.upgrade.domain.configuration.NodeManagerCredentialsPlugIn.execute(NodeManagerCredentialsPlugIn.java:123)
at com.bea.plateng.wizard.plugin.silent.tasks.ExecutePlugInTask.execute(ExecutePlugInTask.java:76)
at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
at java.lang.Thread.run(Thread.java:619)
<May 09, 2011 8:20:28 PM GMT> <FATAL> <Upgrade> <BEA-800000> <Uncaught Exception>
java.lang.NullPointerException
at weblogic.upgrade.domain.configuration.NodeManagerCredentialsPlugIn.execute(NodeManagerCredentialsPlugIn.java:123)
at com.bea.plateng.wizard.plugin.silent.tasks.ExecutePlugInTask.execute(ExecutePlugInTask.java:76)
at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
at java.lang.Thread.run(Thread.java:619)
A fatal error has occurred. This application will terminate.
<May 9, 2011 8:20:28 PM GMT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason: Error upgrading the domain. Look at your sandard output and error for more information> tion>
<May 9, 2011 8:20:28 PM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<May 9, 2011 8:20:28 PM GMT> <Error> <WebLogicServer> <BEA-000383>
<May 9, 2011 8:20:28 PM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Hope you guys find me a solution for this...Thank you.Hi, not positive, but it sounds like maybe the Optical drive is flaky, but a lomg shot...
I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any Uninterpretable Power Supply so the system doesn't shut down in the middle of the process. -
Hi - I made a mistake, I guess. I'm tring to upgrade to os 10.85. I now use 10.75. I bought the upgrade and downloaded it, completely I thought... but when I opened it to install it, a warning came up and said I need 10.8 in order to install 10.85. So...after some thought, I trashed the down load and went back to the app staore to find 10.8. the little box by the mountain lion image said 'downloading'/ Sure enough in a remote corner of the screen there was a little box that said it was downloading. arrgh. I'd already trashed what was downloaded in finder . So I figured I'd stop the download in the little box (which I think was 10.8) , turn off the mac. and then reboot, and download the whole thing again.
Now, when I go to the mountain lion image in the app store, and press 'download' It won't let me download at all. ??What to do??Back up all data.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
From the App Store menu bar, select
Store ▹ Check for Unfinished Downloads...
You may be prompted to sign in. If that doesn't solve the problem, quit the application and continue as below.
Triple-click anywhere in the line below on this page to select it:
open $TMPDIR../C
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). A folder should open. From that folder, delete the subfolder named "com.apple.appstore".
Quit Terminal. Launch the App Store and try again. -
Having Trouble Copy and Pasteing Local Variable in LabVIEW 2010
I am Having Trouble Copy and Pasteing Local Variable in LabVIEW 2010 in s subVI.
I have a VI that has a Local Variable called "Node Addr". I can select it OK, and it appears to Copy OK, But when I go to paste it, nothing appears. It doesn't matter if I use Cntrl-C Cntrl-V or the Copy and Paste from the Edit menu, I get the same results. I tried many times and got the same results. I made sure that I had click a paste location. I can insert the Local Variable if I use the Data Communication panel.
On one of the Paste, I got an error in the error list that said that a Local Variable was not connected to anything. When I clicked on the error, it took me to an insible item in the lower right corner of the block diagram that had nothing but a select box around it. I couldn't select the invisible item, but I could delete it.
Why does the copy and paste of this local variable not work?
Why does the paste cause the insertion of an invisible item?dbaechtel wrote:
My VI is fairly complicated. In several places in the VI, I am either reading or writing to this variable which is an numeric Indicator on the Front Panel. Using local variables seems to be the best way to handle this situation rather that using wiring all over the VI. Since the VI is mainly a State Machine and there are only 2 Writes to the local variable, I am not afraid of race conditions in this case. NO!! While you may think that using Locals is your solution to wiring, it is not! The fact that you are writing and reading, most likely from several places, will most definitely contribute to a race condition. Depending on your implemetation, you should ALWAYS use wires. The wires are the variable. If you are using a loop (While, For), then using shift registers are appropriate means for routing values so that they are used by other sections of the code, later. One thing you must respect with LabVIEW is the dataflow. That's where Locals often fail.
I am not copying the Local Variable from one VI to another.
I am not copying the Local Variable from one VI to another.
The Data Communication panel is one of the panels that shows up in the Functions pop up list when editing the Block Diagram. It is the panel that includes the Local Variable function.
I don't know if the invisible item that was inserted in my block diagram was hidden or not. All I know is that the Errors List said that it was a Local Variable and that it was not connected to anything. I couldn't select it to get more information. All I could do was delete it.
You did not address my questions about why the Copy and Paste does not work properly for my Local Variable. Maybe it's a sign from the Software Gods not to use them LOL!..
So if I understand correctly, you are trying to copy & paste the Local Variable from within the same VI. How large is your block diagram? Did you try right-click on the variable and select "Find > Local Variables"? If it's a block diagram larger than 1 single screen (which it shouldn't), then it is possible that the Local is hiding beyond the screen. You should find it as I described earlier.
See my comments in red above. -
Having trouble upgrading "The Complete U2" to iTunes Plus
I purchased "The Complete U2" in early 2005. When iTunes went DRM-Free/256kbps "The Complete U2" was not immediately available. Apparently, on 05/23/09, for many who had purchased "The Complete U2" like I did, the collection became available for upgrade to iTunes Plus. I received notification in my iTunes Plus cue on or around 05/27/09. When I tried to upgrade on 05/29/09, I received a message stating that the item is no longer available in the iTunes store. Mind you, the icon for "The Complete U2" and the "Buy Album" (for $45.00) is still in my iTunes "Upgrade to iTunes Plus" storefront.
I've been in email support contact with two different reps from Apple, and unfortunately despite communicating with a "Tier 2 iTunes" support rep, I've gotten no solid answers as to why this is the case, or whether it will at some point be available for upgrade/download. The most I've been told is that it's "the band's (U2's) decision" to sell or not sell their product and that they can choose to change sellability at any time. My own further understanding is that Universal (U2's prior record label at the time "The Complete U2" was released) pulled the plug on the initial retail sale of the product in about 07', so new users cannot purchase "The Complete U2" for the first time, any longer. What is puzzling, is that Universal would go to the lengths of providing a 256kbps DRM-free, iTunes Plus edition of "The Complete U2" only to yank it a couple of days after it became upgradable to a lucky few.
I have read online that several users who received notification on 05/23/09 of the availability of the Upgrade to iTunes Plus for "The Complete U2" were in fact successful at upgrading and downloading the content, both here in the U.S., and at users in U.K. and another European country (The Netherlands) have also mentioned being able to upgrade.
I've not read of anyone else in my predicament: Namely, my iTunes Plus upgradable content list contains the option to upgrade "The Complete U2", but when I tried to upgrade I'm receiving a message indicating that it is "no longer available for purchase."I don't know if this will help anyone. In fact, just by posting this it may affect others. Anyway, here goes.
I also could not upgrade my complete u2 library. I tried each day for the past couple of days. Last night (6/19/09) I tried again with the same results. Then I noticed that in the upgrade screen, next to the buy all button, it listed all my purchase that I could upgrade. The total cost included the $45 for the complete U2. I figured, what's the worst that could happen if I try it?
Well, to make a short story long, IT WORKED! I was able to download the U2 complete upgrade. I just had to also upgrade 8 songs from other artists.
So, if you have other songs that can be upgraded, and your Buy All option includes the $45 U2 cost. Then give it a shot. Get it while you can until they "fix the glitch" -
Having trouble putting a downloaded mixtape onto my iTunes library.
Having trouble putting a downloaded mixtape onto my iTunes library.Any suggestions?
Sometimes downloaded mix tapes come as zip files. Is that your case? if so, double click it to unzip, and then add the contents to your iTunes library.
-
Since I installed Mavericks I am having trouble streaming and the fan turns on and stays on shortly into watching a film on line.
Also the screen breaks up into lines and colors with no image in the middle of viewing a film sometimes several tomes.Hi Mudra,
Thanks for visiting Apple Support Communities.
If your fan is running and you're noticing video issues when streaming video, I'd suggest first trying to reset your system, as described in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Reset the system
You can reset the Mac's parameter RAM and SMC.
All the best,
Jeremy -
How do i own the software to enable me to update and download all free updates?
How do I get to own the software to enable me to update and download all my free updates.
I am having a problem when I go to update my Apps. May be i have changed the password. but now I can not update my apps i itunes.
It gives me the message " You can not update this software since you have not owned the major version of this software." I do not know what to do. Can someone help me?
Thank you
jackchildi'm here because i have a question about software update, but your question intrigues me. from what i understand, you're talking about two different things. i'm on the same version of osx and i have an application that is called App Store. I have placed it in my dock. do you have this? I believe it is part of the os. when you open the app there are columns on the top, just like the ios app store, the one on the far right being updates. when you click on this it offers you the option to update all of your "purchased" apps for Mac, with "purchased" including free apps. Unfortunately, unlike the ios app store, you still need to sign into itunes/icloud to get the updates. i'm sure they will change this in a future update because it's simply silly.i believe that your Apple ID and password are the same between itunes and the icloud, since they synch with each other -- they are for me, so the different IDs and passwords referenced above refer to this community forum vs itunes/icloud.
i hope this helps. good luck... -
I have Windows XP, i am having trouble upgrading itunes 10 to 10.5
Hi i have Windows XP, i have itunes 10 and i am having trouble upgrading to itunes 10.5. can you help?
Run this Microsoft Fix and then try again: http://support.microsoft.com/mats/Program_Install_and_Uninstall
Maybe you are looking for
-
K7N2 Delta-ILSR - USB to Serial Adapter Doesn't Work!
Is anyone aware of an error such as the follows with the K7N2 Delta-ILSR? I am trying the use a USB to Serial Adapter, namely the a Prolific PL-2303. However, my PC does not seem to like it, nor does it what to cooperate with it at all. On one occasi
-
External Monitors connected to MacBook Air keep turning off
Prior to getting my MacBook Air, I was using a MacBook Pro connected to 2 external monitors (same signal, just split using DVI splitter). There were never any issues with this setup, but the same can't be said of the MacBook Air. When I used "detect
-
hello, I created a java control which calls an external webservice. How do you handle SOAP fault messages coming back from the webservice? Weblogic just throws an java.lang.reflect.UndeclaredThrowableException since it cannot parse the expected XML m
-
When I try and sync my iPhone or update the iOS using iTunes, I get the message iTunes could not back up the iPhone because the iPhone disconnected
-
I already tried deleting /var/folder ; connecting to my iPhone internet and still getting. How can I fix this?