Having trouble using my 9720 connecting to car hands free kit

Hi, i am utterly frustrated with my company blackberry 9720 phone. The trouble i am having is with the car hands free kit, my skoda superb uses the bluetooth premium and cannot use the normal hands free setting like with my Iphone. The problem i am having is firstly connecting, i can only use the bluetooth premuim, which completly changes all the setting on the phone i.e turns the network off on the phone and then a screen pops up saying running SAP mode (must use an ittenna in car?), which in turn stops emails from coming in, i can stupidly write texts messages on my dash board and receive them and read them on my dash board while driving. So when i remove the keys from the ignition the phone does not put the phone back to its normal working settings, it keeps the network switched off i have to go to settings and turn the network on. Thirdly when i turn the car on the phone will not connect automatically it says cannot connect to mobile, but if i switch the phone off and on it automatically connects, but if by the grace of god it does connect an second time the phone crashes and resets and then connects five minutes later after reseting. forthly this is not an phone issue it is definatly software as i have been given an second 9720 and the fault is present on both phones.
can anyone help

as I believe it a car bluetooth hands free can only be paired to one device . ie if you wish to pair with another device you would have to reset back to default and search again.... so does the cuve work if you reset the bury and pair again but then your other phone does not work with it ... this is logical as if we drove down a motorway we would pick up loadsa phones.... therefor we can only pair to one device

Similar Messages

Bluetooth connection to car hands free

i have a motorola car hands free kit installed with my old 6230i the connection was automatic but i now have a 5500 sport this needs to be re-installed every time i get into my van does anyone know why or is the sport a H.O.S

If you try resetting your motorola car kit ( i dont know how) then pair your phone again this should work. also in your phone bluetooth settings see if you can change the motorola kit to automatically authuorise connections. It sound like the kit is still looking for your 6230i which needs to be deleted.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

HT204387 Can't find my car hands-free kit

Hi, With iphone 5 I can't find my cars hands-free kit when searching bloutooth, but I can find it and pair it easily with my iPhone 3GS. My car is Cadillac SRX 2012

Try unpairing the iPhone 3GS from your Cadillac, then try pairing the iPhone 5 again.
You can find more troubleshooting info in this Apple doc -> iOS: Troubleshooting car stereo connections
Also, iOS 6 uses AVRCP 1.4 so you may need to update the reciever in the car to make it compatible with with all versions of ACRCP.

Not allowing bluetooth connection to car hands free

Hi
I have a blackberry curve 8520 and a Bury hands free kit.
Normally as soon as the car is switched on the Bury comes on and starts searching for the blackberry and finds it immediately over the bluetooth and connects without any trouble.
Recently it no longer does this. Now I have to stop the Bury auto searching, turn off the blackberry bluetooth and then turn it back on for the bluetooth to connect.
If I allow for the Bury to keep searching you can see in the wireless networks screen that if briefly connects for a second and then disconnects and continues to do this.
I have restored the Bury to factory reset and it is not the Bury device because my Blackberry Pearl connects fine without any problem, it is my other phone that won't connect.
I have deleted it out of devices, played around with encryption settings and tried every setting I can see.
What is going on? why is my curve not allowing a connection to be made? I don't understand what can have happened for it to suddenly not work.
Any help would be great.
Thanks

as I believe it a car bluetooth hands free can only be paired to one device . ie if you wish to pair with another device you would have to reset back to default and search again.... so does the cuve work if you reset the bury and pair again but then your other phone does not work with it ... this is logical as if we drove down a motorway we would pick up loadsa phones.... therefor we can only pair to one device

HT204387 how to use synched phone in a car hands free

Hi,
I can't use my 4S phone in my car hands free, it is synched but when I actually talk on phone I have to use the phone in my ear, somehow my setting is changed and I can't get to use the phone hands free, the bluetooth is on, don't know what else to to.

That would be interesting to see an app that's able to do all this and be able to have a keypad to dial a number. Alot of consumers see the iPad as a replacement stereo, if you really look at the features and price between haveing a high-end double din stereo with GPS vs. an iPad/Mini. The high-end stereo w/gps,bluetooth,usb for media storage and all the bells & whistles will cost you well over $1000; As for the iPad.... the iPad already does most of the features that a car stereo can do and alot more, with the exeption of not being able to make a bluetooth calls, but with a price well under $1000 depending on storage space. I have seen that the iPad,& iPad mini has made an impact in the caraudio scene ever since the very first iPad was released. If seeing is believing.... I would suggest to do a search on the web and youtube "ipad in car".

Can't connect my bluetoot hands-free kit

Hello,
I can't get my hands-free kit to work. I want to use it with skype or whatever, but when I try to connect it, i've got:
[bluetooth]# connect 0C:E0:E4:3A:D6:ED
Attempting to connect to 0C:E0:E4:3A:D6:ED
[CHG] Device 0C:E0:E4:3A:D6:ED Connected: yes
Failed to connect: org.bluez.Error.NotAvailable
[CHG] Device 0C:E0:E4:3A:D6:ED Connected: no
[bluetooth]# info 0C:E0:E4:3A:D6:ED
Device 0C:E0:E4:3A:D6:ED
Name: PLT_ML20
Alias: PLT_ML20
Class: 0x200404
Icon: audio-card
Paired: yes
Trusted: yes
Blocked: no
Connected: no
LegacyPairing: no
UUID: Headset (00001108-0000-1000-8000-00805f9b34fb)
UUID: Handsfree (0000111e-0000-1000-8000-00805f9b34fb)
I did a manipulation, and I have
`--> sudo modprobe rfcomm
`--> sudo rfcomm bind rfcomm0 0C:E0:E4:3A:D6:ED
`--> ls /dev |grep rfcomm
rfcomm0
But I can't get it to work as an audio device, it still make when I try to connect it:
[bluetooth]# connect 0C:E0:E4:3A:D6:ED
[CHG] Device 0C:E0:E4:3A:D6:ED Connected: yes
[CHG] Device 0C:E0:E4:3A:D6:ED Connected: no
(seen from here:
https://bbs.archlinux.org/viewtopic.php … #p1473242)
what am I doing wrong?
Thanks in advance
ps: It is a plantronics ML20
http://www.plantronics.com/fr/product/ml20
Last edited by Neldar (2014-11-06 20:46:28)

Try unpairing the iPhone 3GS from your Cadillac, then try pairing the iPhone 5 again.
You can find more troubleshooting info in this Apple doc -> iOS: Troubleshooting car stereo connections
Also, iOS 6 uses AVRCP 1.4 so you may need to update the reciever in the car to make it compatible with with all versions of ACRCP.

IPhone 4: Since iOS5 Bluetooth issues when connected to car hands free and audio system

Hi @ all,
this discussion is either a kind of "warning" for those who hadn't yet updated to iOS 5 and a beg to Apple for fixing the issue:
Obviously the iOS 5 does have some problems with VW and Ford (germany) modells equipped with handsfree and audio systems (googling a little bit resulted in many, many complaints in german discussion forums about it). Unfortunatelly I'm facing these problems now too:
Issue 1:
When the iPhone is connected to the audio-system of the car via Bluetooth, the Audio Slider on the iPhone doesn't work any longer. The only thing that it is capable to do is, if you slide it completely to the left, which results in switching the audio completely off.
Issues 2 (much more annoying):
When the iPhone is connected to the handsfree system of the car, the ringtone volume is obviously set to "off" or at least "extreme low". This doesn't harm when using the phone with the handsfree since the ringtone still is coming from the cars loudspeakers. But as soon as you leave the car and the bluetooth connection is disconnected, the ringtone audio on the iPhone is STILL set to "off". Means: Each time, when you leave your car, you have to increase the ringtone volume manually.
Issue 1 is more a "not nice" or a "OK, it's first release" bug. But issue 2 would have been a reason for me to wait for upgrading to iOS 5, since I'm using my iPhone as a business tool and am quite frequent on travel.
To verify that I hadn't had a bug when upgrading for the first time my iPhone, I completely set my phone back to factory default, put it in maintenance mode and re-flashed it completely anew using iTunes. I only performed minimal setup to make sure, nothing else could cause this. The issue still remained, therefore it was clear to me, it is iOS 5. I never had any of these issues with iOS 3 und 4. A probable "workaround" would be a downgrade, but this doesn't work, as known, either.
@ Apple Engineering: Please fix this as soon as possible!
Cheers,
Frank

Good question... I haven't found a "reliable" way of sending constructive(!) Feedback to those at Apple who really care. I remember the beginning days of Mac OS X, when the reply-link was even on top of the dock.
Maybe I'm just not aware of working feedback channels, I only can hope that some of Apple's people with "influence" read statements like this...
Cheers,
Frank

Im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help?

im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help? I ve uninstalled/ reinstalled switched it on and off what next?

Did you try downloading the movie from iTunes on your iPad? I know it takes longer but I'd try that.
Also try to reset all settings.
Settings > General > Reset. Reset all settings.

Trouble using XWD_RAMSTARTUP to connect to RAM DB:Database dbname must remain current

Trouble using XWD_RAMSTARTUP to connect to RAM DB:Database dbname must remain current...
I am having trouble connecting to the RAM database. The error I get is
"In stored procedure XWD_RAMSTARTUP: The following Express Server error occurred: Database GLB must remain current becasue the TEST program is still executing it."
The express database GLB is the global computing sample given by oracle doc.
My Test program defined in Express Administrator for GLB has the following code:
call xwd_meta.init
call xwd_ramstartup('e:\\Orahome1\\olap\\oes632\\service\\glb.rdc','sampleolap', 'sampleolap')
call xwd_attachdb('e:\\Orahome1\\olap\\oes632\\service\\glb.db')
The hyperlink I used is " http://192.168.10.110/Scripts/oowa.exe/ExpSrv632/dbxwdevkit/xwd_init?glb/test "
the content of the rdc file is
[PATHS]
CODE=E:\ORAHOME1\OLAP\OES632\COMMON\
DATA=E:\ORAHOME1\OLAP\OES632\SERVCIE\
EXTEND=E:\ORAHOME1\OLAP\OES632\SERVICE\
[RELATIONAL]
TYPE=OCI
INSTANCE=SMSDW
[DBINFO]
DBNAME=GLB
Any help/suggestions would be appreciated.

Hi,
> This program connects to database TEST, and reads table MYTABLE in schema MYSCHEMA.
>
> I would know if it is possible to select the table name in a dynamic way:
>
> SELECT db_name() INTO :dbn FROM :ptab
>
> But this line fails with meesages:
>
> dbdsmss: DBSL99 SQL1087
> Must declare the table variable "@P1". - you have to declare variables in beginning of the program.
You can select table name dynamic way , but you have to write ABAP code (Selection screen).
post this question in ABAP forum. you will get more information.
Thanks
Siva

Having trouble maintaining remote desktop connection with Mavericks. What is this about needing RDC 3.7.1 with Mavericks. I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed.

Having trouble maintaining remote desktop connection with Mavericks. What is this about needing RDC 3.7.1 with Mavericks. I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed

Lucky you, it did not work for many users (which as it should be) so MS produced a new version, for ML and Mavericks.
It's in the App Store, for free.
FYI, I assume that you were attempting to post a picture, no one can see it (except maybe you) because it is on your computer rather than the forum server.
file:///Users/dbrant/Desktop/About%20Apple%20Remote%20Desktop%203.7.1.webloc
Use the small camera icon in the editor toolbar to post it.
It also looks like you attempted to use Apple Remote Desktop, which does not do Windows.

I am having trouble using home sharing.

I am having trouble using home sharing. My brother is able to access my libary but I can't access his. Even though we put in his ID for me to access, it just loads and gives up. Can anyone help me out? My OS is windows vista and my brother's is windows 7.

Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Troubleshooting Security Software

HT4972 I am having trouble downloading iOS 5 connected to my laptop. Says I don't have network connection but I do.

I am having trouble downloading iOS 5 connected to my laptop. Says I don't have network connection but I do. Please help. I purchased tv programs and it is telling me I need ios5 to watch and I downloaded it to cloud but have to have this app also. On my iPad I don't have an updates button under settings like I have seen other iPads have.

You only have the option if you are already running iOS 5 already. If you are trying to update to iOS 5, you have to use iTunes on a computer to update the iPad.
Here are the instructions.
http://support.apple.com/kb/HT4972
Or you can connect the iPad to the computer, launch iTunes. Select the iPad under the devices heading on the left, click on the Summary tab and then click on Check for Update
http://support.apple.com/kb/HT1414
If you are having problems with the download, try disabling your firewall and anti virus software until after the download completes.

I having trouble using time machine

I having trouble using time machine on my mac. When I click it, it wants me to set it up. When I click on that it says to select backup disk but there is nothing on the page, it's blank. What do I do next?

Have you connected the Hard Drive you want to storage your backup? If the answer of this question is yes, you need to format it in "Mac OS Extended (Journaled)" It can be a NTFS drive and you are probably using macfuse to have permission to read and write it time machine can't write on NTFS (As far as I know) Hope it helped

I'm having trouble using Adobe Reader

I'm having trouble using or uninstalling Adobe Reader, i get a message when the programme has been anitiated which says Adobe Reader has encountered a problem and needs to close, i went on to Adobe's website and it said try uninstalling Adobe Reader and then re-install it as this sometimes works, i tried un-installing it from the Add or Remove programme but that didn't work either as i got another message telling me that the patch package could not be verified and to make sure i have permission.

Dear Mylenium.
Sorry i don't quite understand your reply, What do you need to know?

I am having trouble with the initial connection. I have isolated the problem to the cable/ connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

I am having trouble with the initial connection of the apple tv. I have isolated the problem to the cable/connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

There are only two types of HDMI cables (standard and high speed - listen to all 1.2, 1.3 etc etc nonsense they will try to tell in the store) both types will work with the Apple TV.
The cable may be faulty though, have you got another to try, what exactly is happening.

Having trouble using my 9720 connecting to car hands free kit

Similar Messages

Maybe you are looking for