Having trouble w/reader & outlook 2003

I have Windows XP w/Outlook 2003 just recently i started to get an error through outlook that stated that it encountered an error and needs to shut down. When i reserche the error it says that it is a compatapility issue w/acrobat reader. So i uninstalled all my acrobat programs and reinstalled reader 8.0 (did it just a few minutes ago). I'm still receiving the error. Any suggestions as to what i'm missing or doing wrong? Thank you very much
Amber

tomlynn wrote:.
I have the Mac 10.6.4. Could that be why?
My PDF ALWAYS opens with an Acobat 5.0 version.
I didn't even realize that5 would run on 10.6. 5 is very outdated for that OS. In fiact, I'm surprised it runs at all.
tomlynn wrote:
My problem is the same as the original post. However, when I tried to follow your advice, after opening a PDF I have saved, when I go to File, there is no Get Info to highlight.
No. You don't open the file first. Use Finder to navigate to a PDF file, highlight it THEN use File>Get info...

Similar Messages

TS3276 Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones ar

Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones are ok

Well I am feeling a bit silly now because that was all I had to do. In the past Workgroup Manager had always opened right up to the list of my users, I never even thought to click on that but apparently that was all that was needed.
I still am not sure how the iChat Server preferences changed themselves on me, but it is not the first time I have had weird "settings" issues with our Snow Leopard Server.
Thanks!

I'm having trouble synching my Outlook Calendar with my iPhone. We use Outlook in my office so it's the only Calendar I use, so I can share inter-office Used to use Mobile Me and I terminated that. Prior to this Outlook synched fine. Prior to having m

I'm having trouble synching my Outlook Calendar with my iPhone iniTunes
We use Outlook in my office so it’s the only Calendar I use, so I can share inter-office
Used to use Mobile Me and I terminated that. Prior to this Outlook synched fine.
Prior to having my iPhone I only had one type of Calendar in Outlook
I know have 'Calendar 5' on my Outlook, but that doesn't show up on my iPhone.
iPhone does give me several other numbered Calendars – but no ‘Calendar 5’
I need to figure a way to get all this synched correctly
very frustrating!

Take a look of this link, http://support.apple.com/kb/HT1701

Having trouble with Microsoft Outlook

Aloha:
I am having trouble with my Microsoft Outlook e-mail program. I can send and receive e-mails OK, but it is constantly trying to send an email message that is not formed correctly. My error panel remains full of the errors.
I erased all the error messages, but it just continues to add them.
I am not, presently, even trying to send an email. However, in no time at all this widow will be full of such error messages.
What might my problem be?
Thanks
Dan Page
Hawaii

Post in the Microsoft for Mac Support forums.

My macbook pro is having troubles loading Windows outlook everytime I try to open it. It says is it syncing.

Every time I try to open outlook after turning my computer on it freezes. I can still access the internet or other files, but the outlook window sits in the middle of the screen with the rainbow curser spinning forever. I have my address synced with my gmail account and on the bar at the bottom of outlook it says syncing but the progress bar doesn't move. Has anyone had this problem before? I read something about having your inbox too full and creating subfolders to help but I can't create sub folders because it keeps freezing.
HELP!

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
If that fails:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Is anyone having trouble synching your Outlook Calendar with iCal on recurring events?

In my Outlook calendar, I created some additional categories for different work events, each with their own name and color on my calendar.
Sync Services is ON.
When I went to synch my outlook calendar with my Blackberry, it looks like 10,000 or more new calendar items were created on my Outlook calendar. My Outlook calendar is a mess. It think the problem is with iCal.
It looks like all of the recurring events were duplicated 10 - 20 times each, including holidays.
I have turned OFF Sync Services.
I have two questions.
1 - Is anyone else having this problem?
2 - I have a Apple Time Capsule. Is there a way I can go back to my Outlook calendar before this problem started today?
Thanks for any assistance you can provide.
Medio Waldt

All your computers/devices can sign into the same iCloud account and sync between them. It rather sounds as if you've managed to create two separate iCloud accounts. You may have a different ID for iTunes and have been trying to use that - you should keep that ID for iTunes, iTunes in the Cloud and iTunes Match and use the main iCloud ID for syncing.
On the computer which works, make sure you know what the login for iCloud is. Then on the other computer remove iCloud altogether:
http://help.apple.com/icloud/#mmb1de40d9 and expand 'Turn off iCloud altogether'.
Now set up that computer with the same login as on the first computer.
http://www.apple.com/icloud/setup/mac.html

Im having trouble syncing my outlook calender with my iphone

Itunes does not recognize an Outlook calender so I cannot sync. 'All Calenders' is checked prior to syncing. Does anyone have a suggestion?

go to settings-> general-> Reset-> Erase all contents and settings. When ur phone finishes that, set it up as a new phone(instead of restoring from old back ups) and then sync with itunes. This should work.
If that doesnt work too.. then delete the softwareupdate.ipsw file from itunes media folder and do a restore. This will download a new iOS file from apple which will be completely error free. (Do this only if the above step didnt solve the issue.)

Adobe Reader & Outlook 2003/2007 send to email

I have multiple Windows XP users experiencing this problem when trying to send and PDF file through email.
Adobe-File-send through email.
Adobe and the email gets locked up with the following error message:
"Microsoft Office Outlook, The operation failed due to network or other communication problems. Check your connections and try again."
It seems that if the users send the email within 30 seconds the email sends ok but if the wait past 30 - 60 seconds thats when the above error occurs.
Microsoft said this an adobe issue and Adobe said they had the fix for Acrobat users to upgrade to version 9 but when I told them I'm using Adobe reader 9 and I have the same problem they told me adobe reader users have to use the forums for support.???
Has anybody seen this before and have you found a workaround?

I have been seeing this off and on. It is rarely consistent and I have been waiting to find a PC that could reproduce this. I finally got one and was able to reproduce the issue about a dozen times back to back, often when the message has been open for a couple minutes. I have been using Windows Debug tools to isolate the culprit and capture a dmp file to analyze. In each instance of the problem a hang is produced after clicking OK to the message. This is where I have been starting the capture. In our case all the dumps of outlook.exe show the culprit as being valkyrie.dll, an add-in associated with Symantec Enterprise Vault. After disabling the add-in, the issue could not be reproduced. I am not 100% convinced though. I would like to know if other dumps outside of our environment point to the same culprit.
To capture a dmp file you will need to install the debugging tools for windows from Microsoft. Once installed, go into the folder where it is installed (C:\Program Files\Debugging Tools for Windows (x86) by default) and run adplus.vbs. Dont worry about the details now, just click OK or Yes to the prompts. You will use adplus from the command line when the issue happens. To do this:
Create the problem and click OK to the "The operation failed due to network or other communication problems. Check your connections and try again". Outlook should become unresponsive/hung up.
Open command window (Start>Run and type cmd).
Navigate to the folder where the debugging tools were installed (cd c:\program files\debugginf tools for windows (x86))
Create a dmp file by running the following: adplus -hang -pn outlook.exe(-hang will tell adplus that a there is a hung application you wish to dump and -pn specifies the process name)
A dialog box will indicate that a folder has been created in the windows debugging folder. It will be named something like Hang_Mode__Date_... The date and time will correspond to the date and time of when the dump took place. Go into this folder and verify there is a .dmp file. The name of the file corresponds to the process ID of the process, the process name, and date and time. The file can be fairly large since it consists of a memory dump.
To analyze this file, open Windbg from the exe or from Start>Programs>Debugging Tools for Windows>WinDbg.
Go to File>Open Crash Dump and locate the file above.
Dont worry about all the jiberish you initially see. In the empty line at the bottom run the following command: !analyze -v. While the file is being analyzed, the status message will say BUSY. Dont worry about the "Error: Symbol file could not be found..."
Look for the FAULTING_MODULE and MODULE_NAME. In our case the culprit this was ntdll and Valkyrie. As mentioned above, Valkyrie.dll is associated with the Symantec Enterprise add-in and this is what we are currently looking at with Symantec.
This is an example of the dump:
I would be interested to know what results you have found.

Still having trouble with reading text file into array

Hi, This is from another post, I have tried one of the solutions that were provided, but got the following error at runtime:
C:\j24work>java Test7
Exception in thread "main" java.lang.StringIndexOutOfBoundsException
at java.lang.StringBuffer.deleteCharAt(StringBuffer.java:681)
at Test7.main(Test7.java:26)
My code is attached. My text file reads as follows:
7 5.5 15 5.35 30 6.5
The first , third and fifth numbers should ultimately be int values representing the term of a mortgage. The second, fourth and sixth numbers ultimately need to be doubles representing the rate on a mortgage. Do I need a 2d array??
import java.io.*;
import javax.swing.*;
import java.awt.*;
import java.text.*;
public class Test7 {
    public static void main(String[] args) throws Exception {
        String line        = null;
        int count   = 0;
        StringBuffer Term = new StringBuffer();
        StringBuffer Rate = new StringBuffer();
        BufferedReader input = new BufferedReader (new FileReader ("MortgageValues.txt"));
        while ((line = input.readLine()) != null) {
            if(count%2 == 0) Term.append(line).append(",");
            else        Rate.append(line).append(",");
            count++;
        Term.deleteCharAt(Term.length() -1);
        Rate.deleteCharAt(Rate.length() -1);
        System.out.println("Term>>>" +Term);
        System.out.println("Rate>>>" +Rate);
       // input.close ();
    }

Okay, modify the code as below:
import java.io.*;
import java.util.*;
public class Test7 {
    public static void main(String[] args) throws Exception {
        String line             = null;
        StringTokenizer strTok = null;
        int count          = 0;
        StringBuffer term = new StringBuffer();
        StringBuffer rate = new StringBuffer();
        BufferedReader input = new BufferedReader (new FileReader ("MortgageValues.txt"));
        while ((line = input.readLine()) != null) {
            strTok = new StringTokenizer(line);
            while(strTok.hasMoreTokens()) {
                if(count%2 == 0)    term.append(strTok.nextToken()).append(",");
                else                rate.append(strTok.nextToken()).append(",");
                count++;
        term.deleteCharAt(term.length() -1);
        rate.deleteCharAt(rate.length() -1);
        System.out.println("term>>>" +term);
        System.out.println("rate>>>" +rate);
       input.close ();
}Cheers!
***Annie***

Having trouble with reading hex from an input file - please help

Hi, I have a txt file with rows of hex, and I need to read each line and add it to an int array. So far I have:
BufferedReader fileIn = new BufferedReader(new FileReader("memory.txt"));
                int count = 0 ;
                String temp = fileIn.readLine();
                int file_in = Integer.parseInt(temp) ;
                while(temp!=null) {
                     data[count] = file_in;
                     temp = fileIn.readLine();
                     file_in = Integer.parseInt(temp,16);// Integer.parseInt() ;
                     count++ ; /* increment counter */
                } memory.txt:
4004000
4008000
3FDF4018
4108200
3C104001
FFFFFFE8
4010C6C0
FFFFFFE8
94000000The above code crashes on the third input (my guess is becuase there are letters in and it can't parseInt letters.
I think I need to parse it into an array of chars instead, however I don't know how to get from the string (temp) to the char array.
can anyone help?

ok turns out it's just a null pointer exception on the data[count] line, becuase I've only initialised the first two slots of data. i didn't see it before becase it was just throwing an error and i never printed it out.
here's how I've defined data:
in the class
int[] data;just before the code to input the file data:
for ( int i = 0; i < length; i++ )
                data [ i ] = 0;thinking this shoudl go through all the array and initialise it. but it gives a NullPointerException on the data=0; line.
any ideas?
Edited by: rudeboymcc on Feb 6, 2008 10:50 PM
Edited by: rudeboymcc on Feb 6, 2008 10:51 PM

Having trouble downloading reader and flash. On firefox I donot have the option to enable java, only

trying to update reader and flash..The download times out everytime. On my firefox, the only line I have avaiable on tools is blockup popper. no java line available to enable. Trying to go from readaer 9.5 to 11.0. Came onto a computer that hasn't been used for a while
Thanks for any input/

Download the offline installers
Adobe Reader: http://get.adobe.com/reader/enterprise/
Flash Player Windows: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
Flash Player Mac OS: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
P.S. you don't need Java to download or install any Adobe products.

I am having trouble downloading reader

can anyone help me figure out how to download reader

http://get.adobe.com/reader
Just click the download now button.

Hello. I am having trouble using Mobileme with microsoft oulook 2010. .The error Mobileme has stopped working . Can anybody help. ??Thanks

Hello
I am having trouble using Microsoft Outlook 2010. When starting Microsoft Outlook displays the error message Mobileme has stopped working. Can anybody help.
Thanks

Well yes, of course you are having trouble using MobileMe because MobileMe no longer exists and has not existed for the last 2 years at least.
MobileMe has been replaced by iCloud, so you will never be able to use MobileMe because it does not exist.
Also, I would suggest that you look more closely before you post, because you have posted this in an iPhone forum and this question has nothing to do with iPhones. You would get more help if you posted in the correct forum.

Sync Outlook 2003 / Nokia 6120 - space character i...

Hi guys - I store my contact mobile phone #s in international format (ie +61 4xx xxxxxx) so they are accessable from overseas when I travel without having to edit. Outlook 2003 seems to put a space character by default after the country code, so these appear as +61 4xxxxxxxx in Outlook. When I sync my Nokia 6120 to Outlook this space then gets transferred across to the phone as the # for the contact. When I receive anything from the contact (phone call, SMS etc), the number I have saved for them does not exactly match the number that comes through (either because of the extra space, or because it will come through in Australian format ie 04xx xxxxxx) and the contact does not get recognised by the phone, and simply appears as the #, not the contact name. If I send an SMS first & this is replied to, it comes back correctly identified, but new messages etc from contacts are not identified.
Is there any way to remove the space that Outlook seems to put after the country code by default? And is there any way for the phone to recognise +61 4xxxxxxxx and +614xxxxxxxx and 04xxxxxxxx all as the same number for the same contact?

maybe it can be accomplished using a macro or modifying this one
http://www.tandasoft.com/software/outlook-nokia-pc-sync-fix/

Having trouble setting up e-mail on new iPhone 4s. I would like to sync with my outlook mail, contacts

I am having trouble setting up my email and syncing my outlook calendar wiht my new iphone 4s.

How do you connect to the internet?
Most of the time, the problem lies here. You can try a couple of things. First, try only 3G or carrier data. Then, try only wifi. If that still doesn't work, your only other option is to try a different hotspot.
I had the same problem before when I updated to iOS 4.3. I thought it was the update at first. I usually have the carrier data turned off because my plan doesn't have an unlimited provision for it. I forgot that I also switched ISPs from DSL to a visibility unit package - meaning I had to setup my laptop so that I could get wifi from it. I realized this when I visited a friends house that I knew I could connect properly before.
My problem was with my laptop. It seems that Little Snitch blocks the ports being used for mail and push notifications. I haven't figured it out exactly since I still can't get email when I'm using my laptop connection. But, it works fine when I'm using ONLY 3G or both/wifi only if connected to a different hotspot.
Hope that helps.

Having trouble w/reader & outlook 2003

Similar Messages

Maybe you are looking for