Having trouble when I go to configure sync...

I go to try to set which applications to sync after clicking two way an erro message comes up and kicks me out
the error message says Intellisync:the operation terminated unexpectedly

Perform a clean uninstall of BlackBerry Desktop Software following this link and performing all the instructions.
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=2&docTy...

Similar Messages

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
Carol

The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

I'm working in Photoshop CS6 on a Mac and am having trouble when I select a Path it automatically feathers the selection border. I can't seem to find any place to adjust a feather setting. Does anyone have a suggestion? I'm using paths to silhouette an im

How do I change a default from feathered edge to sharp edge when I select a path?
I'm working in Photoshop CS6 on a Mac and am having trouble when I select a Path it automatically feathers the selection border. I can't seem to find any place to adjust a feather setting. Does anyone have a suggestion? I'm using paths to silhouette an image on a photograph to use in another document and I need a hard edge on it, not a feathered one.

In the Paths panel, click the flyout menu (in the top right of the panel) and choose Make Selection (this option will only be available if you have a path selected). Reduce the Feather Radius to 0 (zero) and click OK. This setting will be the default even when clicking the Load Path as Selection button.

I updated my iphone5 to the 6.1.2 OS and now I am having trouble when connecting my iphone5 to the USB port, I am not getting any funtionality from my steering controls, and the phone book only show the most recent calls, not the entire phonebook.

Help, is anyone having trouble when they plug their iphone in through the USB connection wit the controls on the steering wheel not working to operate the music and phone book?

Bump and update
iphone 5 - speaker phone and headset work properly. Cannot hear through ear speaker and callers on other end are saying they cannot hear me.
I Have heard about hearing aid mode I set that to on and there was no change.
ALso tried inserting headphone jack in and out several times no use
any help would be greatly appreciated please and thank you.

Having trouble connecting to a mac configured as a wireless AP

Hi,
I'm having trouble setting up my wireless network.
I have,
1. Macbook connected to internet through a router (via Ethernet), and configured to work as a wireless AP under the sharing panel in System Preference (internet sharing enabled)
2. Airport Express configured to join my existing wireless network
3. Xbox 360 connected to the Airport Express via Ethernet
My Macbook and Airport Express is on the same wireless network, and I can see the AE from my macbook and stream music through airtunes without a problem.
But I can't go on xbox live from my xbox, getting "xbox cannot obtain a valid IP" error.
Is it possible to set it up like this?
any help would be much appreciated.

rickmasta, Welcome to the discussion area!
Sorry but that will not work. When the AirPort Express (AX) is connected as a wireless client to the network provided by the MacBook the AX's Ethernet port is disabled.
To make this work you would need to create the wireless network with another AX, an AirPort Extreme base station (AEBS), or a Time Capsule. Then you would configure that device and your current AX to work together to wirelessly extend the network. Then the AX's Ethernet port would be active.

Having trouble downloading contacts to phonebook on sync system in my car since upgrading to IOS 6.0

Since upgrading to IOS 6.0 I'm having problem downloading my contacts from my iphone to the phonebook on my Ford Sync system. I can make and receive calls but the phonebook is empty even though the system tells me it has downloaded phonebook.

A new Outlook Identity will most likely solve your issues. If you have any data under "On My Computer" folders, see this link:
How to move your data to a new Identity
BTW, how much free space on your drive? Use Disk Utility in Applications/Utilities to find this info. You need a minimum of 10% free but 15-20% is recommended.
Outlook gets very sluggish when you are low on disk space. If you have a bunch of older Identities from previous rebuilds you can delete these to help free up space.

I am having trouble when I try opening firefox - it only "flickers" on screen and won't stay open - keeps trying to "re-open" over and over!

When I try to open Firefox I get a small screen saying it is "checking compatibility of add-ons" (or something like that) which alternates with a quickly flashing window of Firefox. Neither one really stays open long enough to get a look at what is being displayed.
I had an earlier version installed which I thought might have been the problem. I uninstalled that version and today installed the updated version - still having the same problem! Any ideas?

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Trouble when trying to Distribute Configurations on 340's & 350's

I noticed that some times when I try to distribute the configuration of one AP to all the other, The distribution list is small. No matter what AP I try to distribute from. Other times it is fine and they all show up. There is a mix of 340's and 350's with a total around 120. Is there a way around this or is this just an issue I have to deal with. Thanks!

What I'am doing is in the web browser in a AP I go to Cisco Services and Distribute Configuration to other Cisco Devices. I only started noticing this with 11.21. Prior to that firmware, it was 11.07.

I am having trouble when i am syncng it wont back up

i have been trying to sync my iphone but when it makes it to the back up part it freezes and wont finish syncing how do i fix this.no when i tryed it it said that the back up is currupt or not compatible with ihone and the same eror happens for my ipad

Hi Val, try this...
https://discussions.apple.com/message/22666449#22666449

Why am I having trouble keeping my itunes and ATV synced?

After syncing my Itunes with Apple TV, everything, movies, music, photos, etc. shows up on my apple tv under My Movies, etc. First question is, Are my movies, etc, now on the hard drive of the apple TV? Next question, With the material on the hard drive of the ATV, do I need to have my MacBook open for syncing. What is happening is after I sync, and close my MacBook, when I go to my movies, ATV tell me I have no movies. Once I open the MacBook and go to Itunes, it syncs up again and my movies are there. Am I wrong in thinking once I have synced and the movies, music, photos should be ready to pull without my MacBook on or open.
If I take my MacBook to work, and my wife wants to watch something, how do I keep everything loaded on the ATV hard drive.
Any help is appricated, Thanks

It sounds like you have your ATV set to "stream" from you Macbook instead of sync. Check the settings (On the ATV) and make sure (If the Macbook is synced, it will show a chainlink icon.).
Once you have the ATV synced, your music, movies etc. are saved on its harddrive. Thereafter, the Macbook only needs to be on when you want to add new material.

HELP! I am having trouble when I try to paste a snap shot into a Word document!

When I paste the picture into the Word document, the image is blurry. What can I do to keep this from happening?

Exactly what does this have to Adobe Reader? Please give details of Reader, Word and your OS.

Having trouble when I save a document

Everytime I save a document and I try to open it again it automatically tries to do so with Word. I have changed the application by default to open pages docs with pages and it still opnes with Word. It won't even show the preview when I use space bar it just shows the pages symbol (little ink bottle)
The docs I created with pages 2008 do have a preview option and open properly with pages.
Any ideas?

If you want to open the documents with Pages, this one must be the first item in the list, not the second one.
And don't forget to click the "Change All" button .
Yvan KOENIG (from FRANCE samedi 21 mars 2009 21:39:52)

HI, I am having trouble when importing .wav files into logic.

Everytime I import this .wav file of a DJ set i recorded, it shows me the waveform but no sound comes out when its played. I have tried converting the bitrate to 16bit and the filetype to aiff as I saw it had helped people with similar problems but when i do this its boosts the gain massivly and the recrding becomes very distored? Really dont know what to try??
Also the reason I am trying to get the Wav in was bevause i need to normalise it as it had to be recorded very quitely to avoid distortion on the recording. I recorded it by using the imput on the back of my monitors as they are usb, and th programme i used to record it is "audio recorder tool" from the app store
Thanks for your help, Joe

I think the problem is you're recorded 32-bit wav files which Logic doesn't support.
(don't convert to aiff, unless you have the right program, that understands converting little endian 32 bit wavs to big endian aiff format, you will get distortion)
I think your best bet is to download "Audacity" the free audio editor and convert to 24-bit WAV files. Re-save the audio file under a different name after converting. In Audacity this is done using the Export function, selecting other non-compressed formats.
http://audacity.sourceforge.net/download/mac
The reason you want 24-bit WAVs to work with is you're going to be raising the volume of the file, 24-bit files will suffer less damage when editing with plugins, normalizing...etc.

Having trouble when creating links

Good afternoon,
I use RoboHelp6 HTML, and i'm using the FlashHelp as the
output layout.
When I work on a topic in the WYSIWYG Editor, I try to create
links between a Word document or even a webpage that I have created
from the Word document.
When I go to click on the link that I have created in the
topic it shows that I have created a link but I can't actually
visualize the link.
When I go to generate the project, and see if the link works
from there. It doesn't even show the letter in blue or something to
show that there is a link attached.
Can somebody please tell me how to create links step by step?
Thanks,

Hi there
Woooowwww, that's some long path! Do you really have that
many folder levels? ../ is shorthand that says Up One Folder. So in
this case, you have a page attempting to link seven folder levels
above where it lives. I don't suppose there is any way to screen
capture your folder structure for this project and post to an image
sharing site. Here is one:
http://www.turboimagehost.com.
Cheers... Rick

HT1766 Having trouble when backup

My iPhone cannot connect to any wifi network, so I tried to restore it. However, when I do so, an error pops up, saying that'iTunes could not backup the iPhone because an error occured. I tried to use the iCloud to backup, but it still fails. Any resoultions?

Follow the instructions here: http://support.apple.com/kb/ht4946

Having trouble when I go to configure sync...

Similar Messages

Maybe you are looking for