Having trouble with audio edit to tape, print to video ok

Hi all, please go easy on me, this is my first post.
I am having difficulty getting audio on to tape via 'edit to tape'.
The hardware is blackmagic decklink extreme, feeding component video and analoge audio to a UVW-1800P.
I can do a print to video on a crash record and the audio works that way, but edit to tape does not.
I have tried both deck link and built in audio in the audio settings and the FCP a/v settings, seperate and ganged output settings, I have set the insert settings to 2 channel Sony, reloaded the decklink drivers.
The irritating thing is the audio is there whilst cutting, but as soon as I try edit to tape there is complete silence. The important thing is that it worked a few weeks back but does not now, it must be a setting?
Thanks in advance for your help.
This machine I am working with this week is an Intel MacPro running FCP 5.1.2 and Mac OS 10.4.8
G5 Dual 2GHz-Blackmagic Decklink Pro, G3 with Sonnet G4 upgrade   Mac OS X (10.4.8)  
G5 Dual 2GHz-Blackmagic Decklink Pro, G3 with Sonnet G4 upgrade   Mac OS X (10.4.8)  

I had this same problem and this resolved it for me:
-Go to your "Settings" icon and click on the "General" tab.
-About 2/3 way down the page you will see "Use side switch to:" - make sure "mute" is checked rather than "lock rotation."
-Then make sure the side switch, located next to the volume toggle switch on the side of your ipad, is moved to the right (no red dot showing).
My audio worked fine in embedded videos after I did those two things.  Hope it works for you.

Similar Messages

  • Still having trouble with audio on Macbook Pro

    I had posted a discussion board earlier on this issue. I've been having trouble with audio for certain videos on youtube and basically any website embedded with a video. The audio works for a few seconds that doesn't or it doesn't work at all. My volume is up, not on mute, and the one on the video isn't on mute either. It's funny because I just tried watching a video on Firefox (as opposed to Safari) and it works. Could it possible be something with the settings for safari?

    Try restarting your Mac, resetting your router, and resetting your modem. My cable internet has gotten slow at times as well, and when I reset my router everything cleared up.

  • Help urgently needed with edit to tape / print to video error

    I have tried to edit to tape and print to video a sequence (0my whole project, worked for way too many nights to let go... so frustrated and sad right now because it doesn't work.
    The project is saved on an extern harddisk, my harddrive on teh pc is too full (not big enough).
    My camera and FCP connects but all the time I get an error that 'the tape may be locked' . AND I HAVE TRIED WITH DIFFERENT TAPES, none of them were locked!
    I am not really sure how to set the camera in this VTR mode... I have tried in the settings to set it in webcam mode... and I have tried without... and I dont have a button or setting called VTR, only a *PLAY' option or a 'FILMØ option....
    My A/V settings are FireWire PAL and DA PAL 48khz ... however have no ide what that means or if these should be changed...?
    I checked from apple but cannot find my DV cam on the list... hmm, does that mean I cannot do edit to tape recordings???
    My Dv cams informations:
    NV-GS140 by Panasonic, Model 0x80330B, 0x804580114B5DD1
    I checked the system settings and was able to the FireWire/NV-GS140 Unit
    I have a MacBook1,1 / Intel Core Duo/ 2 GHz
    OS 10.4.11
    I use the version FCP 2
    Please help me out, I am really without any good suggestions how to proceed!

    You're going to have to use a dvd authoring program. Burning the seq to a dvd qill just create a qt movie on a dvd data disc. It won't create a dvd video disc that plays in a dvd player.
    Export from fcp a QT movie, current settings, self-contained. Use Anamorphicizer (http://mac.softpedia.com/get/Video/Anamorphicizer.shtml) to make imovie recognise it as 16:9. Then import that file to idvd.
    Or you can drop your 16:9 sequence into a new 4:3 sequence to letterbox it, then you can do the export as above but skip the anamorphicizer step.
    It's better to use compressor on the original 16:9 sequence and then use dvdsp to author, but if you've never used dvdsp it's a big program to get your head round.
    The export can be done in two ways;
    1. Export from fcp using 'export using compressor'.
    2. Export a QT ref/self-contained movie and import that into compressor.
    3. Export a QT movie and import it direct into DVDSP.
    The second option will take longer initially (if you use the self-contained option) but will then allow compressor to work in the background, the first option will tie up fcp for the duration of the encode.
    Once in compressor use one of the 16:9 dvd presets, depending on the duration of the movie and the quality you want. Don't try to adjust the settings. If your movie is 31 mins just use the shortest option (i think it's 60min) and make sure you select the m2v video and ac3 audio options. If you just select the mpeg 2 video you'll only get video, as you've discovered.
    Open dvdsp and create your opening menu and a video track, import the movie file, add it to the video track, and then add the audio to the track as well. Then add any chapter submenus you may want.

  • Having trouble with Audio Sync in FCExpress

    Hello, everyone...a question for the board.
    I recently acquired a new iMac with Final Cut Express...planning to try some video editing at home.
    I haven't been successful with the proper configuration for captured video, however...using a Sony TRV-900 as my source, video feeding in via firewire 800 (I bought a 400/800 adapter to make it work), and ingesting using NTSC Basic...however, my audio is still not in sync with the video--the video is always ahead, and it jumps further ahead the more I ingest.
    Is there some configuration I need to use so that the audio syncs correctly? Is it, as I suspect, a drop-frame issue that I haven't set up correctly?
    Any help you could throw my way would be very much appreciated.

    I realize that most DV cameras will record in 32 and 48 sampling rates. What I'm trying to get you to do is see what you've ALREADY recorded.
    Open one of the captured clips in QuickTime, then hit Command j to see the movie properties. Or in FCP, right-click on a captured clip and choose Item Properties to see what audio you are trying to capture. Once you know that, create a Sequence with those settings, then capture any remaining footage with those settings. If needed, recapture any footage that was previously captured using the wrong settings.
    -DH

  • Having trouble with audio clips in FCP

    I have a project which involves using a number of short audio .wav clips stacked up with a video clip - lots of sounds to go with a SPFX-heavy project.
    Problem is - I can hear a 'popping' noise at the start of the .wav clips. In some short portions of the project this is really annoying because you can hear 2-3 pops in rapid succession as one wav file comes in after another.
    I've brought the files into Soundtrack Pro and there is no popping sound to clean up in the individual audio files.
    It anyone else having a problem like this? Is it unavoidable?

    Yes, it is a common problem with digital audio files. I believe it is known as DV Offset, or some such. You can search for POP and find many discussions here and on other FCP forums. We see the topic weekly at least. The most common solution is to place a 1 or 2 frame fade at the beginning of the clip.
    This is not necessarily a problem with FCP, it's digital audio, that's just kinda how it is.
    bogiesan

  • I am still having trouble with Guided Edit mode in Photoshop. It doesn't work and I have been

    careful about the size of the files that I open or work on. Initializing doesn't run and I was wondering if not down-loading Revel was effecting the editing features in Photoshop 12. I have a IMAC with Snow Leopard and Mavericks. I am [email protected] My case number is 0185190932. I have been using an Adobe book.

    What do you mean by:
    I have a IMAC with Snow Leopard and Mavericks
    Those are two entirely different versions of the mac operating system. Snow Leopard is 10.6, and Mavericks is 10.9.
    If you are really running 10.6, the specs for PSE require at least 10.7. If that's not the problem, more information, please, about just what you have and just what is going on. Incidentally, this is the user to user forum, so we have no access to any case number stuff. We're just other customers like you.

  • If you're having trouble with Audio with Movies or Netflix, try this...

    Go to general> settings> audio and turn Dolby Digital to 'off',  Then unplug your Apple TV for 20 seconds and try again.
    Should do the trick. Worked for me after talking to Apple Support.

    Even though Disk Utility First Aid 'repaired' the drive I would still not rely on DU to find and fix errors. Nor continue to rely on LaCie.
    Usually when there is a problem the FW ports need to be 'reset' which seems to be a LaCie feature or only happens with their cases.
    And yes, use SuperDuper or Drive Genius 2 so you have bootable backups. But sadly 3rd party disk repair and maintenance are essential and a must. Don't wait until DU First Aid does find an error it can't fix, DW finds and fixes problems Apple doesn't.

  • Is anyone else having trouble with Audio Assets not packaging correctly? Indd CS6

    When I go to package my indesign files, which appear properly linked and organized, rather than bundling the play and pause icons in one folder labeled Audio (in an Overlay Assets folder) like it should, it collects as two Audio folders (both into an Overlay Assets folder). I do have two audio resources I'm using (the same mp3 file for each audio button). When I collect, I see one folder is named Audio and has nothing in it. Nor does the 2nd folder, named Audio 402-12510241 but with a long 12 digit code in the filename (this number changes each time I attempt to bundle.). So each time I try to package, then open the newly packaged file, the audio controller files show up as missing assets.
    Here's two alert messages I get when I:
    A. Try to package a file
    B. Try to preview on iPad
    If I manually dump these collected audio folders and replace into the Overlay Assets folder it works to preview on the iPad. And seems to work. But try repackaging and you get the same scenario.
    Any ideas how to resolve this?
    —Brian

    Well it worked, kind of. Opened and worked in CC. Previewed to iPad just fine. Packaged folder on the CC machine, which seemed to create correct overlay asset folders with the audio plan and pause pngs. Yeah.
    Then, I followed the steps from your note, copied the whole folder to the cs6 machine. Opened the idml in that folder, where there was also the CC version, saved the idml as a new filename in cs6. And if I stop right there, I likely have good files.
    But for good measure, I tried to package again, hoping this time I'd see the audio folders in the right place. But no dice. The packaged file creates two empty audio folders. The reason I keep trying to re-package is because I'll be adding more content to these files and will have to re-package at least one more time before uploaded article into an actual folio. And I want to address the problem before going to the Cloud. I'm a bit hesitant to upload given the behavior of these audio files. I've tried importing new audio files with new controller files but that doesn't work.
    Days ago, doing troubleshooting of the file, I noticed an old remnant which I deleted from the CC file, and that was a plain text box (with 100% color fill) that had an audio controller file path/location (in the audio folio overlay panel) that linked backed to the CC machine. This was an accident to link this colored box, and it had no mp4 link (or audio controller files) attached to it in the links folder. But deleting the box did delete this audio pathway.
    So I can keep doing what I'm doing, replacing the Overlay Assets folder with a custom Audio folder each time, but I'll have to do this to my other 700 pages of iPad documents that will follow this chapter. I'd rather just understand what is happening, fix the file once, then move on and use the corrected files for a template to use for other 20 chapters i have to build.
    Mac OS 10.7.5 (which keeps telling me there is an CS6 update but then after updating it, the same update is ready for me to download again). So maybe my OS has something to do with it? Or working on two separate harrdrives that are both within the same tower? I'm trying to work on just one, but I have copied files onto this 2nd drive, which I plan to add as new articles to a new folio as soon as I figure this out.
    What do you think?

  • Trouble with audio editing.

    I'm trying to re-edit a film clip from a previous FinalCut project. I only have the .mov file from the project, and imported that into FinalCut.
    Editing the video was no problem, but at random intervals, the audio is garbled and seems to have deteriorated. But it's not always garbled and it just happens to the vocal sounds.
    The original audio/video (.mov file) was in complete working condition. Any thoughts as to why the voice recordings go in and out of quality?

    .mov is a file type that contains MANY different codecs.
    What is the format/codec of your material?
    What are the settings of your editing sequence?
    How are you monitoring it?
    x

  • Having trouble with audio streaming

    I have tried numerous times to stream specific files through my Mac Book Pro, on this specific web page when I click stream.  Does anyone have a solution?

    Give us and example of a page.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Trouble with audio when converting MPEG to iPOD Video

    I am following the Quick Time Pro instructions for exporting my mpegs to iPOD video format, but when I do not get any sound. I am using Kazaa to download my mpegs. Is that the issues? I don't want to pay for videos on iTunes already formated for my 5G iPod. Can you help

    QT Pro does not handle "muxed" formats (MPEG1, MPEG2, VOB, some AVI, AVI MJPEG, etc.). Use an MPEG based third party application like Videora Converter.
    2.0GHZ G5/533MHz G4 DeskTop/400MHz G4 PB   Mac OS X (10.4.3)  

  • Why am i having trouble getting audio with a VGA connector

    I can connect my iPad 2 to my hd tv with a VGA connector and Netflix.  why am I having trouble with audio?

    VGA connector only sends the video component not the audio

  • Trouble With Audio Coming Out of Sync

    I am having trouble with audio sync
    I am using .mov files of myself talking however I also record audio of myself talking as well. The audio files record as mp3 however I convert them to aiff files in order to better synch them in FCP
    I have an audio sound as an in point in order to better sync them and the syncing is perfect when i start.
    My files are about an hour and a half long and 20 minutes or so the audio starts to come out of sync and my mouth becomes a half second or so behind the audio. I record this audio live so there is no delay between my speaking and my recording voice but the longer the video goes the more out of sync I become.
    My syncing method that I use is "Merge Clips" at the in points.
    Has anyone else experienced this?

    All sorts of things you can do.
    Easiest fix is just to run down your timeline and every few minutes snip the audio and move it back into sync.
    Now after that;""
    Qe have no idea what your process was. We assume you're editing in Final Cut. How did you import your footage? What format is it in the browser?
    what are the settings of your timeline? Look at the sequence settings.
    You know that you can plug audio from
    mic into a Zi8?
    You need to get rid of the mixer hum. Likely ac electrical
    interference , a ground fault, but who knows.

  • My Macbook with 10.6.8 is having trouble with certain applications- Word will not open, and text edit or pdf will not print.

    My Macbook (13 inch 2008) running OS 10.6.8 is having trouble with some applications.  Word will not even open.  I cannot print from text edit or Preview or Adobe.  Excel sometimes opens but very slow.  What could be wrong?  I have repaired permissions, used an antivirus program, deleted some old MS fonts, and still no change.  I have 1 G RAM and there seems to be plenty available and I have 50 G of hard drive space empty.

    Well, first 1gb of Ram is not plenty. It's the absolute bare minimum just to run OS X 10.6.8. The MS Office applications are ram hogs also. I would recommend three things.
    1. Get more ram.
    2. Reinstall and update your MS Office applications.
    3. Reinstall Snow Leopard.
    If you're not familiar with Activity Monitor you might have a look at this link and you'll be able to judge your ram situation a little better.
    http://support.apple.com/kb/PH5149

  • I am having trouble with the "numbers" app on my MacBook Air. I go to print my document and that works just fine. I cannot however return to the document after printing. What do I have to do?

    I am having trouble with the "numbers" app on my MacBook Air. I go to print my document and that works just fine. I cannot however return to the document after printing. What do I have to do?

    RR,
    Not to worry, you're not the first to expect Print to finish by returning you to the edit mode. The thing is that Printing is so hit and miss with this version of the app, you will probably want to stay in the Print window for more than one attempt.
    Jerry

Maybe you are looking for

  • I am unable to download iTunes (10.5.2).

    I am unable to download iTunes (10.5.2). When I attempt to download I get an error message which reads: "Apple Software Update Errors occured while installing the updates. If the problem persists, choose Tools>Download Only and try installing manuall

  • Flat panel scanner hpscanjet 3570c

    I have an old flat panel scanner hp scanjet 3570c which has been working fine. I got a new hp laptop last month with windows 8 installed. I would like to continue using this scanner. Do you know of a driver I can download to make this work? Jim Beck

  • Link between alocation table(WA01) and purchase order PO/STO

    HI, I have on doubt regarding allocation table which we create in WA01. During the creation of allocation table, when we select line item and goes into taxts tab and enter some text like "abcd". I just to know does this text hav any relation with PO.

  • Batch export of multiple clips from one video in Premiere CS4

    Hello, I'm really in a bind and hope you guys can help me out. I have about 30 hours of video in about 30 mpg files..1 hour in each video. I need to splice out small clips from each video..anywhere from 10 to 20 clips in each and send them to Media E

  • Computer doesn't recognize my mini!

    I just updated, then read on the forum that perhaps my ipod is set on manual instead of auto - so I checked under preferences. It said no ipod connected, but it is! the pod, meanwhile, simply says "do not disconnect" and iTunes just sits there with t