Having trouble with garageband loops are out of time with other loops

having trouble with garageband have bought loops from primeloops and beat loops are not in time when i paste other loops down for example certain loops do not lock into measure region correctly .. so say for instance i lay down my beat then i try to add hi hat below and the beat is not in time with hi hat any awnsers may have pressed some setting accidently because this hasn t happened before as previously using these loops were all in time and locked at correct measures ..

The GarageBand experts await you here:
https://discussions.apple.com/community/ilife/garageband

Similar Messages

Having trouble installing iMovie HD on a new Mac with Mavericks

I am having trouble installing iMovie HD on a new Mac with Mavericks.
I know that iMovie HD works with Mavericks because we are using it on other Macs successfully. However, those machines were upgraded starting with OS 10.6. In other words, iMovie HD was installed on these Macs when the Macs had Snow Leopard.
When I use the iLife 06 disc, I am presented with “You can't open the application “iLife 06” because PowerPC applications are no longer supported."
I understand that iMovie HD is universal, not PowerPC. How can I get past this to install iMovie HD.
Thanks

OK, I made some progress.
I used Pacifist (Shareware) to open the iMovie HD 6 install packages from the iLife '06 installer DVD (iMovie.pkg and iMovieThemes_Tiger.pkg) and let Pacifist install them to the right places.
But doesn't iMovie HD 6 require QuickTime 7 to work ?

How can I record with GarageBand 1.3 in the background using other app?

How can I record with GarageBand 1.3 in the background using other app?
I use iPad 2 with iOS 6 and GarageBand v1.3.
I'd like to play an other app like Sunrizer synth while the GarageBand is recording in the background in a track.
By now I can do it only using the build-in mic of iPad, but this is not the point.
Can I record other apps in a GarageBand track?
Thanks a lot for your time.

I suspect you are probably correct about the reasoning, although there are already a myriad of ways to do that.
Don't get me wrong - I never said I like this. But it is consistent with other Apple applications, that are similar restrictive; you cannot take a screenshot, when dvd-player is running for example.
That are the moments, when I am glad that MacOS X is a unix system under the hood

Recorded audio is playing back out of time with midi drums, I'm using a new avalon 737 with it too.

I am trying to record guitar over a midi drum track, its all great except the guitar plays back out of time with the drums, i have just introduced an avalon 737 compressor, it didnt used to have before.
Before the Avalon it all worked perfectly, cant figure out how the avalon would make logic play out of time, I am recording through an Apogee Duet 2.

Yeah, and it didn't work.
I had problems when I updated to iOS 5 (lost all my apps - a few of my friends had the same problem) and when there was an update to iOS 4 (camera wouldn't work). The iOS 5 issue was sorted by backup (but I lost the app data) but for the iOS 4 issue I had to return my iPod to get a new one.

Error in sql query as "loop has run more times than expected (Loop Counter went negative)"

Hello,
When I run the query as below
DECLARE @LoopCount int
SET @LoopCount = (SELECT Count(*) FROM KC_PaymentTransactionIDConversion with (nolock) Where KC_Transaction_ID is NULL and TransactionYear is NOT NULL)
WHILE (
   SELECT Count(*)
   FROM KC_PaymentTransactionIDConversion with (nolock)
   Where KC_Transaction_ID is NULL
   and TransactionYear is NOT NULL
) > 0
BEGIN
   IF @LoopCount < 0
       RAISERROR ('Issue with data in KC_PaymentTransactionIDConversion, loop has run more times than expected (Loop Counter went negative).', -- Message text.
               16, -- Severity.
               1 -- State.
SET @LoopCount = @LoopCount - 1
end
I am getting error as "loop has run more times than expected (Loop Counter went negative)"
Could any one help on this issue ASAP.
Thanks ,
Vinay

Hi Vinay,
According to your code above, the error message make sense. Because once the value returned by “SELECT Count(*) FROM KC_PaymentTransactionIDConversion with (nolock) Where KC_Transaction_ID is NULL and TransactionYear is NOT NULL” is bigger than 0,
then decrease @LoopCount. Without changing the table data, the returned value always bigger than 0, always decrease @LoopCount until it's negative and raise the error.
To fix this issue with the current information, we should make the following modification:
Change the code
WHILE (
SELECT Count(*)
FROM KC_PaymentTransactionIDConversion with (nolock)
Where KC_Transaction_ID is NULL
and TransactionYear is NOT NULL
) > 0
To
WHILE @LoopCount > 0
Besides, since the current query is senseless, please modify the query based on your requirement.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Entity Bean Rollback fails: caches are out of synch with the database

We are encountering a critical issue where the rollback of a session transaction rolls back any database changes, but doesn't roll back bean changes in memory. When we next access the bean, it returns information that should have been rolled back. The memory cache is out of synch with the database.
We have a simple session bean S, using container managed transactions. We also have an entity bean E using bean managed persistence. E has a single member <name>.
We implement a method s() in S with <trans-attribute> Required as follows:
public void s() {
Context lookupContext = getLookupContext();
SHome shome = (SHome) lookupContext.lookup(SHome.NAME);
S s = shome.findByPrimaryKey(thePrimaryKey);
System.out.println("-- current name = " + s.getName());
s.setName("IGNORE");
EJBContext ejbContext = (EJBContext) getContext();
ejbContext.setRollbackOnly();
Since this is BMP, the setName call issues our SQL update against the S record. When the session transaction rolls back, the database changes are also rolled back. But the entity bean in memory shows the modified name. We can see this in the next call to s() since the getName() returns IGNORE rather than the original value. We have also gotten debugged into the underlying instance cache associated with the S bean descriptor. I.e.
AbstractEJBHome ejbHome = (AbstractEJBHome) lookupContext.lookup(SHome.NAME);
AlternateHashTable aht = ejbHome.getBeanDescriptor().getCache();
Looking at this map of bean instances also shows that the bean instance for S is not rolled back.
From previous conversations with the server technologies team, we understand that during the transaction, we should be working on a cloned copy of the S bean. Upon rollback, the copies should be discarded rather than merged back to the cached bean. They seem to be merged regardless of rollback state.
We are using OC4J 10.1.3.0.0 (build 060119.1546.05277).

Actually, what one or the developers in my group found out is two things:
1) The clone is a shallow copy.They copy the references but not objects themselves. This has been causing problems for us.
2) It seems that you don't work on a copy and you work on the original and they keep a copy. Now, this is fine IF you don't have multiple threads working on the same Entity bean and we moved our application from Weblogic where it throws an exception if that Entity bean is in use to OC4J which is suppose to copy the bean and doesn't so you have multiple threads possibly modifying the same object.

HT204053 my icloud id is not registered and having trouble deleting it from my ipad to replace with my original id. how can i delete my icloud if the system doesnt reconize it.

trouble deleting icloud account from IPad. The ID is not reconized and trouble resetting it.

Try going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Having trouble using my imessage and FaceTime every time I try to log in it says wrong password or apple ID which I know it's the right one because I always use it.... Please help!?

Trying to activate my imessage and FaceTime. I click on using my apple ID so it ask me for my password I put it in and it says its wrong which I know it's not cause I use it on other things and it works fine except for imessage and face time... So anyone please help!!!!

Hi brittney290,
Welcome to the Support Communities!
I'm sorry to hear you are having issues with your iMessage and Facetime activation.
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Troubleshooting Apple ID activation
After each step, toggle iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that you have an active Internet connection. You can complete activation using Wi-Fi or a cellular data connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
In Settings > General > Date & Time, ensure that Set Automatically is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Enable iMessage and FaceTime while connected to another Wi-Fi network in a different location.
When enabling FaceTime or iMessage on an iPhone, you may see "Waiting for Activation". This message refers to the activation of your telephone number only. You can use FaceTime and iMessage with your Apple ID even if your phone number has not completed activation.You can see that you've activated FaceTime and iMessage with your Apple ID here:
Settings > FaceTime > You can be reached by FaceTime at:
Settings > Messages > Send & Receive > You can be reached by iMessage at:
Additional Information
To sign out of your Apple ID:
Go to Settings > FaceTime, tap your Apple ID, and select Sign Out.
Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out.
Find information about linking your phone number to an Apple ID for use with FaceTime and iMessage.
Find help with issues you may encounter when using iMessage or FaceTime behind a firewall.
Recommended Wi-Fi router and access-point settings.
Note: FaceTime may not be available in all countries or regions.
On iPhone, SMS messaging is required to activate FaceTime and iMessage for use with your phone number. Depending on your carrier, you may be charged for this SMS.
I hope this information helps ....
Have a great day!
- Judy

.swf files with imported video are just white slides with no audio.

Hello there,
I had been using Adobe Presenter 7 until recently and I have now upgraded to Presenter 10 for use within Powerpoint 2013. Unfortunately I am having quite a few issues with it.
I am using it to make presentations built up of imported video files, as I had been doing before with Presenter 7 without any issue. I typically have a presentation of 6 parts and import each video file ~80MB Mp4 into a single slide then name each slide adding a presenter and output it to an 'swf' file. This worked fine in Presenter 7.0.7. Now my issue is that the output will load the player it will have the correct presenter, and timings on the chaptered sidebar but when it plays the presentation area of the screen is just white, there's no audio, no video just the correct time for each section. I've checked the output folder the individual video files will play within windows media player without issue.
It should be noted that the html5 only version works fine, until uploaded to a web server and then it will not load any of the player with IE11 (I can't test it in other browsers).
I would appreciate some help with this if anyone has any ideas to fix this.
Many thanks

Well make sure you have read and write permissions on the file. Do a get info in the video (command-I) and alter it as necessary.
Daniel C. Slagle
Keeper of the "Unofficial" iMovie FAQ
http://iMovie.danslagle.com

Please help with cancellation! running out of time

i really really need to cancel my purchase of illustrator, my first month is about to be over and i am running out of time! i can't seem to be able to do it according to the proper steps, because it does not appear in my plans or downloaded items. all that appears is a free creative cloud plan which does not have the option of cancellation. according to my bank, adobe has charged me for the first month of the package, so i don't know why it does not appear in my packages. please help as soon as possible. is there no way to contact adobe other than these forums?

Jessie,
You may open a chat here,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or use Adobe phone Support here,
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
It is 1:30 PM over there now (PST).

What is the best way to stop parallel loops at the same time, from any loop?

If there is a vi with two or more parallel while loops, what would be a good method to simultaneously stop parallel loop execution, from any of the parallel loops? My intent was to try and do this without local variables, so I used notifiers. This seems like an ok method for two loops, but how about for n loops?
In addition, my code has a flaw. I use an OR block to compare the stop status of each of the loops. This works fine most of the time, but if both loops are triggered to stop at the same time,the boolean result will be false, causing the loops to never stop. How can this be avoided?
Thanks,
Curt
Attachments:
parallel_loop_w-stop.vi ‏54 KB

I think you have the right idea, notifiers are one of the better ways to stop parallel loops. You can simplify things by using 1 notifier for everything. I modified your VI to use 1 notifier, it will set the notifier to True ONLY if the loop is stopping, then it stops. The other loop will read the notifier status, and stop based on it the next time it executes.
I also changed the second loop to stop and notify if it has an error (that is usually a good idea, especally if you have I/O or other things that can cause problems)
I also changed the switch mechanical action, that will eliminate the problems for your second question.
The VI's attached are written in Labview 7.0
P.S. If you have 7.1, the Queues are polymorphic, meaning that the typecast operat
ions are NOT needed!
Attachments:
parallel_loop_w-stop7_0.vi ‏45 KB

How do you print with StdOut.println once at a time with equal probability!

Hello everyone!
I tried finding this in the FAQ, but nothing really came close to my unique situation. I am trying to write a method before the main method to report to the user that their guess is too high, in a game where the computer picks a number from 0 to 1000.
I have four different statements to let the user know that the guess is too high, here is the code:
public static void reportTooHigh() {
StdOut.println("Wow come on.. too high!");
StdOut.println("Too high buster.");
StdOut.println("Too high, LOL.");
StdOut.println("WOOWWAAAWEEWAAHH.. too high!"); When I use this method in my main method by typing ProgramName.reportTooHigh(), it prints out all of the statements. Any suggestions on how to get them to print out one at a time with equal probability?
Thanks!
Edited by: OvechkinRulez on Apr 27, 2008 4:06 PM
Edited by: OvechkinRulez on Apr 27, 2008 4:06 PM
Edited by: OvechkinRulez on Apr 27, 2008 4:07 PM

OvechkinRulez wrote:
Flounder, I tried using an if statement but for some reason it didn't work for me. It still printed out all of the statements. Can you give me a head start, I am sure I can figure out the rest. Do you pick a value from 0 to 1, and then if its below .25 you print out one thing, below .5 but above .25 you print out the other, etc.?If you use the Random class you can get a number from 0 inclusive to 4 exclusive (ie 0,1,2 or 3). If 0 print the first message, if 1 print the second message, etc. Or as pointed out already use the switch statement.

Bought new iphone 6 with Verizon plan 2/11/15. Tried to connect with home wifi 3 or 4 times with I thought the correct password. Now it says Forget This Network Can't its the only one I have and this laptop is connected just fine. How do I clear this and

Bought a new iphone 6 with Verizon plan 2/11/15. Tried to connect with my home wifi 3 or 4 times with I thought the correct password but now it says Forget This Network and wont let me try again. Can't its the only network available. How do I clear this and start over. Thanks, this laptop connects fine but this is my first smartphone and I don't see why it gives a crap if I mess up 50 times! Help!

Help is right here for you Omichael! Let's get you conneted
to your home wifi. May I ask are you able to connect to other wifi networks? If
so then please forget your home network again, turn wifi off, reboot, and
retest. If this doesn't work then you will want to reset network settings.
Settings > General > Reset > Reset Network Settings. Keep in mind that
this will delete ALL wifi passwords that you have saved.
ArnettH_VZW
Follow us on Twitter @VZWSupport

Having trouble showing an Iview in a HTML page with frames format

Hi, I have a public webpage with 3 frames (top, navigation and content)
In the content part has to be showed a portal anonymous page.
I created the anonymous portal page that shows me a Webdynpro that I created, works fine. But when I put the link in the frame of the public webpage, is like the page entered in a loop and nothings is showed.
But if in the frame I put the direct Webdynpro link works fine but the Custom colors that I set in portal doesnt works (and this is important).
Any1 know how can I do to put an anonymous portal page inside a frame html without lossing the colors that I replace in the theme editor.

sun1977 wrote:
Hi,
I have the Home page which has the usual static text. I was looking for the option of showing some data on that page like
1. last data load date which will have to be selected from the database. Do we just create a dynamic action on the HTML page? Going to try this now. But just wondering if there is a proper way to do this?
Just to be a little more specific. I have static text in <Table> tags in a plain HTML page. So within the <TABLE> tags which is in the text source, Can I call bind values or PL/SQL procedures?. Was looking for some ideas on this.There are several options. One is to create hidden page or application items set using queries in item source, computations or processes. These can be referenced in HTML region source (and other places) using the static text exact substitution notation:
&P1_ITEM.Another is to replace the HTML region with a report region using a custom report template. If there are a number of related values to display this is likely to perform better as only one query is involved.
Unless these values respond dynamically to changes on the page there is no call to use Dynamic Actions.
2. Insert the audit field with the SSO username. Any idea which variable stores the username which maybe can be passed to the trigger to update before an insert/update.Use the built-in <tt>APP_USER</tt> substitution string. For this purpose normally in a database trigger including a fall-back value to cope if the table is modified outside of your APEX app:
:new.modified_by := nvl(v('app_user'), user);

HT204074 My iTunes ID and email are out of sync with my iCloud ID and email. How can I change my iCloud email address?

How to change iCloud ID without changing iTunes ID? Help

If you want to merge Apple ID's - you can't do that. For reasons unknown, Apple just doesn't allow it. Passwords are are different story. You should be able to reset your password for any other the ID's that you have.
Do you have multiple Apple ID's? And if this situation is that much of a mess, you might be better off contacting Apple in order to get it straightened out.
Here is a user tip that might be of some help.
https://discussions.apple.com/docs/DOC-4551

Having trouble with garageband loops are out of time with other loops

Similar Messages

Maybe you are looking for