Having trouble with home page buttons

I created a project that has more than 20 states so to accomodate this I used the functionality to create a custom component with sub states. However, I seem to be having a problem with the buttons on my home page (Chapter 1, Chapter 2, Chapter 3, etc). They work fine the first time visiting the home page and link to the first state within each custom component as I'd like them to and as I've assigned in the button properties. However, once a user clicks through all the states within a component and returns to the home page, if they click the button for that chapter again, they are directed to the last state within the component. What am I doing wrong? I have these home screen buttons configured to link to the page that  represents the starting point for each chapter. If I try changing the button to configure to automatically transition to the custom component state 1 instead of a page then it doesn't work. Any suggestions?

Haven't been able to call due to health issues.  Hope to be able to call soon, but tried to move WiFi as much as I can.  Upgraded to Quantum, so the WiFi router is connected via ethernet to the main box (if I remember correctly).  Then the Gateway device is connected to the router via ethernet cable.  Can I just remove that cable or do I have to set it up to be wired?  I really can't move the two routers out of our bedroom.  Thanks and I will hopefully be able to call within the next couple of days.
Michaela

Similar Messages

  • I'm having trouble with my Pages app. Over half of my document are updating, and do not finish. I cannot get to the documents. This has been going for 2 weeks now, they do not update.

    I'm having trouble with my Pages app. Over half of my document show that they are updating. I cannot open or delete the documents. Does anyone know a fix for this? Please help.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702http://support.apple.com/kb/TS1702
     Cheers, Tom

  • I have been having trouble with inserting pages in a document in indesign

    having trouble with inserting pages in a document in indesign

    You're going to give us more information for us to help you.
    What operating system? What version of InDesign? What happens when you insert a page (and how are you choosing to insert a page)? Does it happen with just one file, or does also happen on a clean new file?

  • I am having trouble with home sharing 11.0.1, i am having trouble with home sharing 11.0.1

    i am having trouble with home sharing 11.0.1 and setting it up with apple tv and i pad

    Welcome to the Apple Community.
    The following article(s) may help you.
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Troubleshooting Security Software

  • Newbie having trouble with template highlight (button)

    Stupid question I'm sure, but for the life of me I can't figure it out:
    When using a template, if I change anything at all about the TYPE related to a button, or the size of the button/text group, the corresponding HIGHLIGHT gets freaky. I can't for the life of me figure out how to control where that highlight appears, or even it's size, etc. So I have these beautiful DVD menus that are marred by weird highlight bars--some of them run across two buttons.
    (Yes, I figured out how to make the highlights invisible, but that defeats the whole point of course.)
    Hope my question wasn't confusing. Any help would be wildly appreciated. Thanks...

    Okay, let me pose a theory: Is it possible my installation is having trouble, in other words is what I'm seeing NOT normal?
    Can anyone verify (it would only take a few minutes) my findings? Here are the steps: Create a brand-new project using (just to make sure we're on the same page) the Apple template called "Wedding Classical Index." Next, resize any one of the main elements (labeled "button 1," etc.). OR, change the text to two words, or modify the text size/font. When finished, hit the Simulate button and mouse over the button you modified.
    Does the highlight look normal, e.g., underneath the text, etc., or has it moved to the side of the text, or changed into a vertical line, or worse?
    I just want to verify that my installation isn't being screwy. Thanks to the kind soul who takes a minute to help me out with this so I can move on...

  • Trouble with home page being indexed

    Hi
    For some reason my home page isn't being indexed by Google and I can't understand why. If I put in site:thelittlethings.info/Home.html into Google it doesn't appear but it does if I go to that URL so it definitely exists in that form. If I put just site:thelittlethings.info into Google then my home page comes up but just as www.thelittlethings.info/.
    I think I may have done something wrong when renaming my index file or something as this problem never used to exist. Can someone explain to me how I need to publish the site if I don't want my home page to be the first url in the nav bar because I think this is where the problem exists unless someone has a different idea. I know I have a few issues with the seo on my site but this seems to be a specific and fundamental error that I making.
    Cheers

    Can anyone help me as this is still bugging me - it's not a problem I used to have and I'm sure it's because I've made changes to my home page and done something wrong when setting which page is the index - would that make sense?
    The home page is http://www.thelittlethings.info/home.html or http://www.thelittlethings.info/ as it is showing in my web stats

  • Having trouble with a page.....

    It's been over a year since I updated my site and I've forgotten alot of CSS.
    I duped an older page, updated the code and css and for some reason my page is broken.
    Can someone help me?
    Here is the link:
    http://www.bobbysmonstermodels.com/alienGrey.html
    It was modeled after this page (so you can see the proper layout):
    http://www.bobbysmonstermodels.com/godzilla.html

    What's weird is when I hit the Preview button in Dreamweaver it previews fine in Safari, but when I upload it it doesn't work.
    And I have uploaded the css file......I have no idea what's going on....
    The main photo is supposed to be floating right (and it's not).
    And the body copy div is supposed to be staying inside another div container and it's running all the way across the page.

  • TS3274 I am having trouble with the operating button on the front of the iPad you have to push it hard to make it work

    Their is a problem with the button on front of my iPad it does not work all the time you have to press it very hard to make it work most times any help please

    Ipad User Guide
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Having Trouble with Get & Put buttons

    I am trying to set up my first web site. I have finished
    placing my first page on line. But now I would like to amend the
    first page slightly by "getting" the page back so that I can change
    it. When I select the full files page and select "get" nothing
    seems to happen. I would assume the page or part of it would appear
    somewhere so that I can work on it. As it is at the moment, when I
    hit "get" nothing seems to happen. Can anyone help me?
    Bussoboy

    Troubleshooting JavaScript errors in Dreamweaver
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19105#dat
    Most likely #4 is your problem.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "sandyberry1" <[email protected]> wrote in
    message
    news:fn270d$92t$[email protected]..
    > thanks for the tips. I have the FPT site defined. Excuse
    me if I word
    > this
    > wrong as I am not a computer guru. NOW the "put" button
    is not grayed
    > out.
    > Thank you, thank you. Now I have a new problem. When I
    click "put" it
    > tries
    > to connect & then I get the following error & I
    have no idea what this
    > means or
    > how to fix it.
    >
    > While executing receiveArguments in site_File.htm, the
    following
    > javascript
    > error occured
    > ---------------------------
    > At line 30 of file
    >
    C:/ProgramFiles/Macromedia/DreamweaverMX2004/Configuration/Manus/MM/Site_File.js
    > "; exception thrown in native function.
    >
    > Sandy
    >

  • Having trouble with Yahoo home page sign in. Some time it brings up my wife's Yahoo log in instead of my log in how can I fix this?

    When I open Firefox it is suppose to take me to my Yahoo home page. But it opens up showing my wifes Yahoo sigh in page in stead of mine. Having trouble with Yahoo home page sign in. Some time it brings up my wife's Yahoo log in instead of my log in how can I fix this?

    Did your wife tick the box on the Yahoo sign in page to remember her for two weeks?
    It would be best two have two separate Firefox profile folders, one for each of you to prevent such problems.<br />
    Then you also do not have problems with deleting or changing bookmarks.
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • Im having trouble with my home page alignment.

    Im having trouble with my home page alignment. If you look at all the other pages within my site you will see how the alignment should be... trunderground.com.  I have tried chaning master pages for my home page, and still nothing.... Please someone help.

    Ask in whatever forum of whatever web design app you use.
    Mylenium

  • I'm having trouble with certain buttons on the Ebay pages.

    I'm having trouble with certain buttons on the EBay pages. Like enlarge, other pictures,add to my watch list, etc. this happened after I upgraded to 8.0. I have tried to upgrade java but the java console will not work ?? tried all this in my other browser and all works fine. What do I do? Thanks

    If it happens again then try to reload the website or clear the cache and the cookies from that website.
    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    *http://support.mozilla.com/kb/Deleting+cookies
    *http://support.mozilla.com/kb/How+to+clear+the+cache

  • Only had my iPhone 5 a week and already I'm having trouble with the home button? Any soloutions

    Only had my iPhone 5 a week and already I'm having trouble with the home button? Any soloutions

    Sure. Take it back. If you got it from new it has a warranty.
    Or describe the problem fully in case we can help.  "Having trouble with the Home button" doesn't give much of a clue....

  • Having trouble with the home button

    I'm having trouble with my home button. It works when it wants to. Has anyone else had this trouble?

    Try these three very basic troubleshooting steps and see if any of them help.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    This involves using fhe home button but try it anyway .....
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Quit all apps and restart. If you have multitouch gestures turned on, you can swipe up from the bottom of the screen to get to the task bar.
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Maybe you are looking for

  • Quick question: how to stop catalog opening in new tab in browser?

    hi, when i click a catalog from a list on the main page it opens the linked template for my catalog products but does so in a new browser tab? how do i get the catalog products page to open in the current tab? thanks in advance. sm

  • How to call GUI/Dialog in Acrobat sdk Plugin

    How to call GUI/Dialog in Acrobat sdk Plugin using VC++ here is my code ACCB1 void ACCB2 MyPluginCommand(void *clientData)   HMODULE hAppInst = GetModuleHandle(NULL);   DialogBox(hAppInst, MAKEINTRESOURCE(IDD_DIALOG1), NULL, NULL);   HWND hWnd = ::Cr

  • SqlType in creating MutableStruct? Please HELP

    Here is the snippets: import oracle.jpub.runtime.MutableStruct; public class cisObject implements CustomDatum, CustomDatumFactory static final String SQLNAME = "OBJ_TYPE_CITY"; public static final int SQLTYPECODE = OracleTypes.STRUCT; static int[] _s

  • How to install SAP Business Planning and Consolidation 5.1

    Hello Experts We have the activity to install BPC 51.. Can you assist me how to proceed in this activity. Thanks and Regards Pooja

  • Question for Apple

    I just would like to know... the capacity bar in iTunes for my iPod shows audio in blue and video in purple. The capacity bar for my Apple TV shows audio in purple and video in blue. It's so unlike Apple to be inconsistent like this, so I'll assume i