Having trouble with Ipod, restoring thing, kind of

This might be kind of long,
So two weeks ago my i tried to load my video ipod onto itunes but my computer said it didnt recognize the usb device, I left it there and then took it out and plugged it back in. This time it loaded on itunes but it said it was currupt. So I called my buddy and he walked me through the whole updating thing, so we updated everything, nothing helped. I tried restoring it but I kept giving me different messages, including the error 1418 one.
I took it to Best Buy, to have it looked at, and they said that nothing was wrong with it, and my computer was the problem. Somehow they also deleted everything off of it. When I got home, It began to work fine, I loaded all my stuff back on and everything. Yesterday, It started doingthe exact same thing. Both times it has been after my Ipod was fully depleted of power, so I think that this might be the problem, but the thing is even when the computer recognizes the ipod, it still gives my the restore screen.
Im grateful for any help anyone can give me, thanks.

See: Error 1415/1417/1418/1428 when restoring any iPod using iTunes 7 or later.

Similar Messages

  • Having trouble with Ipod-because of cold??

    I am having a problem with my ipod not wanting to change the songs with my ihome remote when attached to the ihome. It will not puase or play either when using the remote. I have put another ipod into the ihome and it works just fine. I also am having trouble plugging it into my car as it just gets an error. Also double checked this with another ipod. I have already reset and restored it with no luck. I think this problem maybe due to the fact that it was left in my car for a few hours and it was very cold outside. Can anyone tell me what I should/can do to fix this? I works in all other aspects, this is why I am so confused. Thanks!

    I have discovered that the error I am getting from the car stereo is saying that it is a "connection" error between the car stereo and the ipod. So that kinda narrows it down and like i've said i know its the ipod b/c i have tested everthing else with a different ipod to double check things.

  • Anyone having trouble with iPod 1.2 update?

    After going back from 7 to 6.05 (which I kept on another PC), I still find my iPod 5th gen. crashing occasionally when I play some podcasts. The fix has been to play a few moment from the podcast on the iPod through iTunes.
    Everyone is bashing iTunes 7.0/7.01 - might there be a problem with iPod 1.2 upgrade too?

    I don't have trouble with that.
    But this might mean nothing, because I'm on a German version of InDesign CS6 v8.1.0 on Mac OSX 10.7.5.
    What I try to do:
    Change the preferences.
    Change the workspace.
    Restart your machine.
    Restart InDesign.
    The preferences should be sticky then…
    Uwe

  • Having trouble with ipod and g4 tower.

    hi all,
    my ipod is erratic in the sense that sometimes the os will mount it and other times it wont. i cant determine any set of circumstances that lead to either. the ipod always shows up in the ipod updater often with strange serial codes not that of my ipod. when i restore the ipod. it mounts, itunes recognises it. everything works great.
    when i eject it and plug it back in,im back at the start, no mount(equally often it mounts), not in itunes (ever), and a different serial no. in ipod updater.
    i had the same problem with my ipod mini before it died. so i guess its a problem with my machine. everything else works fine.
    ipod works fine with powerbook g4, imac g5 and windows
    is this a common problem, is there a fix.

    not sure what to tell you other than try posting your same question in the iPod section of the discussion forums.

  • Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore.

    Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore. Please help!

    If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
    If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
    As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
    If there are specific tasks you need help with:
    http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
    Is a good resource.
    Peter

  • I'm having trouble with my Ipod- I tried to restore it but keep getting a message - the ipod could not be restored. an unknown error occurred(1413)

    I'm having trouble with my Ipod- I tried to restore it but keep getting a message - the ipod could not be restored. an unknown error occurred(1413)
    Mt computer has been freezing up on me lately and I think it messed up my Ipod when it quit right in the middle of downloading and got shut off.

    That's because you jailbroke your phone. You can't get help here.

  • HT4623 I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do???

    I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.

    Maybe this will help:
    Troubleshooting
    As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data.

  • TS1468 I am having trouble with two cover flows duplicating themselves more than once, is there anyone out there that can help me with this, they are not duplicated in my itunes library, just the ipod.

    I am having trouble with two cover flows on my IPOD, duplicating themselves more than once, they haven't duplicated themselves in my Itunes library, just the ipod, could anyone have any ideas on how I could fix this problem. I have tried so many times, even if I restore the ipod, it still does the same thing. Please if possible email me at [email protected] with any suggestions.

    Aha! I have sorted it.
    For those with similar problems, the solution is this:
    Macintosh HD > Library > Audio > MIDI Drivers
    Then delete DigiDioMidiDriver.plugin

  • I'm having trouble with syncing my iPod to my computer.

    I'm having trouble with syncing my iPod. It gets stuck on the last step saying, "Waiting for changes to be applied." It's been doing this for the last half hour. Is there anything I can do to correct this or is am just going to have to restore my iPod?

    You can sync/manually mange iphone with one and only one computer.  If you sync/manually mange to anther, then it will erase the current content and replace with content from the new computer.
    What "trouble" are you having?

  • Switched from a PC to a MBP, having trouble with iTunes syncing iPhones, iPods. Devices are still linked to the PC ?

    Switched from a PC to a MBP, having trouble with iTunes syncing iPhones, iPods. Devices are still linked to the PC. How do I undo the PC link without a restore / reformat?

    Post in the iTunes forum:
    https://discussions.apple.com/community/itunes
    Read:
    http://www.apple.com/support/switch101/
    http://www.macworld.com/article/1153952/superguide_switchingtoamac.html

  • Having trouble with sound on my iphone 3gs ringtones work but ipod doesnt any ideas?

    having trouble with sound on my iphone 3gs ringtones work but ipod doesnt any ideas? have tried resetting cleaning earphone dock and still not working

    Same here, I get no sound from videos, text messages. This happens for a while, then it works again then it doesn't work. When I go to settings, my "change with buttons" is on but buttons don't work. I have restored it but there is no change. Here is a picture of my screen when i try to change volume.

  • Hello, I'm having trouble with my ipod

    hello, I'm having trouble with my ipod

    Holding down the center/select button and the menu button will reboot your ipod. See if that helps. Also, I'd recommend something else- I had nothing but trouble with my ipod classic until I spent $20 to get Mac OS Mountain Lion. It did what you said and sometimes wouldnt play, or wouldnt power on...
    Try rebooting your ipod and let me know what happens and maybe in the future obtain Mountain Lion to aide your ipod in functionality.
    Good luck!

  • HT1414 hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me icannot get my

    hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me i cannot get my iPhone turn on

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • Having trouble with the most simple of things: Static IP

    I am having trouble with the most simple of things: Static IP.
    I am working in Windows Server 2008 R2 SP1.
    "Control Panel\Network and Internet\Network and Sharing Center\Local Area Connections>Properties>Internet Protocol Version 4 (TCP/IPv4) and Internet Protocol Version 6 (TCP/IPv6)"
    IPv4: I have went to "ipconfig /all" and found the "preferred" IP Address and the Default Gateway. 
    Assign DNS Servers?
    IPv6: I used "netsh interface ipv6 show address level=verbose" and found 3 usable IPv6 IPs.
    Assign IP Address, Default Gateway and DNS Servers?

    What is the question?
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • I'm having trouble with my sound up and sound down keys. They're doing other functions. This is only a new thing.

    I'm having trouble with my 'sound up' and 'sound down' keys. They're doing other functions. This is only a relatively new thing.

    You didn't mention what those "other functions" were.  That might help!
    First thing to check is System Preferences > Keyboard > Keyboard tab - make sure "Use all F1, F2, etc. keys as standard function keys" is un-checked.  Hopefully that still works in Mountain Lion.

Maybe you are looking for

  • Upgrading To Tiger From 10.3.9 With The 10.4 Install DVD

    I got my G5 in May, 2005 just as Apple was releasing Tiger so a 10.4 Tiger install DVD disc was included in the box. I have 10.3.9 and have had very few problems. But if I do want to upgrade to Tiger in the near future, will the 10.4 install DVD disc

  • Need a Dynamic SQL statgement that returns multiple values.

    Hi, I'm using Oracle 10.1.0.5. In an anonymous block I have a dynamic SQL statement that finds the table name and column name that a string value resides in. It looks like this:       l_sql := 'SELECT 1 FROM dual WHERE exists (SELECT 1 FROM '||      

  • New hard drive but troubles with I tunes after re-install

    I've recently had a new hard drive installed on my ibook G4. Its a 250GB Powerbook Hard Drive Western Digital Upgrade. I did not have the disk for leopard as this machine was bought as a refurb, so we installed Tiger OS X from another Ibook G4 we hav

  • CSIs best practice to get the best oracle deals

    One company acquired multiple small companies, now time to re-new oracle support , we have 7 CSIs and paying for all of them, 6 of them with quantity 1-2 (and not sure even anybody using it) , any way to check if someone using that CSIs? one with qua

  • Need some help in understanding J2EE

    Hi guys, I have been doing java for the past 3 years... From OOP to WAD (Windows Application Development), however i didn't study EAD (Enterprise Application Development) which teaches J2EE, thus i have no knowledge of J2EE... i have tried to read th