Having trouble with Mercury Engine, do I have this right?

Ok, so after many months of looking for a replacement for Sony Vegas Pro we decided that the Adobe solution was the best option for our needs and bought a license for CS5 and two new machines for our video editing.
The desktop is a poweful beast with the latest and greatest installed, and we also invested in a new laptop which was custom built for on the road editing. This laptop includes the GeForce GTX285M graphics engine but for some reason the Mercury engine within CS5 is not working with this card.
Can someone explain why this is the case and what the solution may be? I am new to Adobe software so have I installed evrything correctly or is there something I need to install or change within the program to get the mercury engine working with the card. I have tried the usual route with the drop down for Renderer but it is greyed out.  Help?

This laptop includes the GeForce GTX285M graphics engine but for some reason the Mercury engine within CS5 is not working with this card. 
Can someone explain why this is the case and what the solution may be?
Hardware acceleration doesn't work, officially, with any laptop GPU chipset at this time. Search around here for the "GPU hack."

Similar Messages

  • I have a Lucid 2 LG.  I have been having trouble with insuffient storage.  I have a 8G phone and have spent hours with Tier 2 tech trying to move info from the internal storage to the SD card with no luck,  When I go to storage in the settings it states t

    I have a Lucid 2 LG.  I have been having trouble with insuffient storage.  I have a 8G phone and have spent hours with Tier 2 tech trying to move info from the internal storage to the SD card with no luck,  When I go to storage in the settings it states that over 4 gigs is for Misc?  System data takes up over 4 gigs.  No one can tell me what system data consist of.  So My question is does anyone know what system data is?  I am assuming I have a 8 gigphone but can only use 4 gigs???

    System data is the OS or operating system.  That is where the recovery stays separated from the rest of the storage so that it doesn't get corrupted.  It is not accessible and non-movable.

  • I'm having trouble with custom ringtones.  I have downloaded the free software "makeTones" and have created some ringtones.  I then copied those to Mac and played them in ITunes.  My Itunes does not have a ringtone tab.  I can not sync the ringtones.

    I'm having trouble with custom ringtones.  I have downloaded the free software "makeTones" and have created some ringtones.  I then copied those to Mac and played them in ITunes.  My Itunes library does not have a ringtones tab.  I can not sync the ringtones (or I don't know how)!  Please help.

    Yes, the file extension is M4R.  Does it matter where I save these files on my Macbook?  I then opened them in Itunes and played them.  I did find the Tones folder in Itunes but the Tones or Ringtones tab does not show up when I select Iphone (within Itunes).  When I open the Tones folder in the Library, it is empty.  Thanks in advance for your help.

  • I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

    I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

    Shootist007 wrote:
    Clifton I must disagree with you on the above statement. It is my opinion and experience that you should never connect the camera directly to any computer, Mac Windows Whatever.
    It is always best to Remove the memory card from the camera and put it in a card reader, whether an external reader or one built into the computer, to copy images from the card.
    Hi Shootist. I would be interested in hearing some reasoning on this. I almost always use a USB cable to connect my camera to the MBP for transferring pictures, and have moved about 30,000 this way over the last 6 years since my photography went digital. Recently, on the rare occassions when I have only a few to transfer and I was too lazy to go for the cable, I have used the card reader; about half those times I have difficulty getting the MBP to recognise the card. I find I have to press the card very hard into the slot for it to be recognised.
    My rationale is quite possibly wrong, but I feel that the USB connectors are more robust and hard-wearing than the flimsy connectors on an SD card. Also, I haven't measured it, but I think the data transfer is faster with the cable. (I just came across this test, which reports noticeably faster transfer for cable than built-in card reader, but the computer was a PC)
    Chiara, sorry for hijacking your thread.

  • My computer continually asks me to enter my password for Keychain access. This problem is continuos and I am having trouble with eliminating it. I have changed my password through Security and my Accounts numerous times to no avail.  Is there anythin

    My computer continually asks me to enter my password for Keychain access. This problem is continuos and I am having trouble with eliminating it.
    I have changed my password through Security and my Accounts numerous times to no avail.
    Is there anything I can do other than Resetting the entire computer and re installing all of the software, apps, etc.etc.

    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select
              Change Settings for Keychain "login"
    In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
              Keychain Access ▹ Preferences... ▹ First Aid
    There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
    Select
              Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.
    If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.

  • Having trouble with my trackpad does it have to be sent off for repair

    Having trouble with my trackpad,it freezes up computer whenever I touch it. Now I'm using a wireless mouse to operarte. Does this sound like something I will have to send off to be repaired?

    Hey Betty2241,
    Thanks for the question. Let's try a few things first:
    1) It'll be a great troubleshooting step to reset the SMC:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    2) See this article for Magic Trackpad troubleshooting:
    Portables and Magic Trackpad: Jumpy or erratic trackpad operation
    http://support.apple.com/kb/TS1449
    Thanks,
    Matt M.

  • I am having trouble with itunes.  I am getting this message: Service Apple Mobile Device failed to start, verify that you have sufficient privileges to start system services.  How can I fix this?

    I am getting this message: Service Apple Mobile Device failed to start, verify that you have sufficient privileges to start system services.  How can I fix this?

    Hello hurleygirl63,
    Thank you for the details of the issue you are experiencing with iTunes.  I recommend following the steps in the article below:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am having trouble with a video.  I have tried to copy it to a flash drive because it is too big to fit on a DVD, it says it is too large for the volumes format.  Please advise.

    I have done many DVD's for seniors for graduation so I am familier with Imovie.  I have just finished a projec that is a combination of video, music and stills.  I shared it through idvd.  Now I can't burn it to a dvd because it is too large.  It is too big even for a two sided disk.  I have researched it and i find that blue ray would be big enough.  Does apple offer  blue ray burner?  if so, what is the cost?  I tried another route and took my external hard drive to copy it to a PC.  there computer wouldn't recongize my drive.  I am assuming it is because it is formated for apple.  I tired copying it to a flash drive and and it says that it can't be copied because it is too large for the volume's format.  Suggestions?   PLEASE!!!!!

    Could the video be too big because of using too high a resolution?   480p is sufficient for a DVD.  the thread at:
    https://discussions.apple.com/thread/5868958?tstart=30
    may be of help.
    Apple does not support Blue ray - you have to use a thrid party application like Toast.
    To transfer the video to a PC you need a FAT-formatted hard drive (or of course a sufficiently big memory stick).
    You could also go via a network, via the cloud (eg Dropbox) or with 'Wetransfer" or similar.
    Geoff.

  • Haveing trouble with my games and i have adobe plash 11

    i dont know if it in my seting or that i have windows xp put cant play my game every since i got the xp

    Quit the game and restart the iPad.
    To quit the game - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If that doesn't work try this.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • IM HAVING TROUBLE WITH relaunching the illustrator, i have idea how to do so,  i need to do this because some of the plug ins are missing.

    need help

    yoonjeej,
    You may (still) be left with the issue, unless you reinstall using the full three step way (strange things may linger):
    Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • I have been having trouble with re direct and I have set this option in the tools folder. Is there a way to block these sites from coming up on redirect?

    Even though I set up the option in firefox to block redirects. it still happens. is there a way to block those redirect sites from coming up?

    Even though I set up the option in firefox to block redirects. it still happens. is there a way to block those redirect sites from coming up?

  • Having trouble updating my iPad 2 , I have the right amount of mermory but I keep getting error occurred

    I'm having a problem updating my iPad 2 from iOS 5.1.1 to the iOS 6 ,it keeps saying error occurred , but I have more then enough mermory to update

    See
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
     Cheers, Tom

  • Having trouble with wifi since upgrading to ios7

    Having trouble with wifi since downloading ios7

    I have had this problem on my iPad and iPhone 5 since the update in September. I called apple support numerous times, did all the troubleshooting, and went to the apple store and had both devices replaced under warranty. Nothing fixed the problem.
    Then as a last ditch effort I called my internet service provider. Turns out that the ios7 doesn't seem to work on a wpa2 network and needs to be changed to a wep network. The tech did this over the phone and now both devices work normally connecting to my wifi! I am still nervous I'm going to run into more issues but so far so good.

  • I'm having trouble with my account!

    Hello! I'm having trouble with my account. I have paid and should have a VIP creative cloud-account, but for some reason I have the 30 day for free, how can we solve this problem?

    Hi Cecilia,
    IT seems you have a Creative cloud for teams under your VIP plan.
    Please refer to the help document below:
    Creative Cloud Help | Manage your Creative Cloud for teams membership
    Regards,
    Sheena

  • I'm having trouble with something that redirects Google search results when I use Firefox on my PC. It's called the 'going on earth' virus. Do you have a fix that could rectify the vulnerability in your software?

    I'm having trouble with a virus or something which affects Google search results when I use Firefox on my PC ...
    When I search a topic gives me pages of links as normal, but when I click on a link, the page is hijacked to a site called 'www.goingonearth.com' ...
    I've done a separate search and found that other users are affected, but there doesn't seem to be a clear-cut solution ... (Norton, McAfee and Kaspersky don't seem to be able to detect/fix it).
    I'd like to continue using the Firefox/Google combination (nb: the hijack virus also affects IE but not Safari) - do you have a patch/fix that could rectify the vulnerability in your software?
    thanks

    ''' "... vulnerability in your software?" ''' <br />
    And it affects IE, too? Ya probably picked up some malware and you blame it on Firefox.
    Install, update, and run these programs in this order. They are listed in order of efficacy.<br />'''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' <br />These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
    ''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
    SuperAntispyware - [http://www.superantispyware.com/] <br />
    AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
    Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]<br />
    Also, if you have a search engine re-direct problem, see this:<br />
    http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
    If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: <br />
    [http://www.spywarewarrior.com/index.php] <br />
    [http://forum.aumha.org/] <br />
    [http://www.spywareinfoforum.com/] <br />
    [http://bleepingcomputer.com]

Maybe you are looking for