Having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

AirPort Utility in Mountain Lion will not support the older versions of the AirPort Express.....model numbers A1084 and A1088. Check on the side of the Express for the model number.
In addition, AirPort Utility in Mountain Lion will not support the older "round" or "dome" shaped versions of the AirPort Extreme.
Can you check to see how your devices might be affected?

Similar Messages

HT1923 I cannot install the latest version of itunes as it instructed me to uninstall the version I had, which I did, but the "Apple mobile device support" will not uninstall. This has left me with no itunes . Help please

I cannot install the latest version of iTunes as it instructed me to uninstall the version I had, which I did, but the "Apple mobile device support" will not uninstall. This has left me with no iTunes and the new version will not install until I can uninstall all the old components. Help please

You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunesSetup.exe installer, unpack the installer into its components using 7-Zip then try installing AppleApplicationSupport again. It may still fail to install but you may get more useful error messages as to why not.
tt2

So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase it...

So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
Can anyone suggest a solution to this vexing problem?
Thanks in advance.

Jeremy.Laurin,
have you tried agb76’s approach here?

Why am I having trouble running Adobe Flash Player 11 on my 2011 Macbook Air? I've downloaded and installed it repeatedly; yet when I try to open certain images online or play certain Youtube segments, I get the message, "You must have Adobe Flash 11..."

Why am I having trouble running Adobe Flash Player 11 on my 2011 Macbook Air? I've downloaded and installed it repeatedly; yet when I try to open certain images online or play certain Youtube segments, I get the message, "You must have Adobe Flash 11..." My computer tells me it is installed and running.

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 5.
1. If you're only having trouble with YouTube videos, sign in to your YouTube account and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
2. If you're getting a "blocked plug-in" error, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
3. Triple-click the line below to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
4. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
5. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
6. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
7. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.

Error message airport utility not supported on this architecture

I'm using a macbook pro with OS X v10.5.8 and trying to set up a new Time Capsule network, however I'm getting the error message "airport utility not supported on this architecture". How do I fix this so I can set up my network?

Hmmm, that message would imply that Airport Utility is from a PPC Mac, or an older version of the OS?
Might download & install this...
http://support.apple.com/downloads/AirPort_Utility_5_3_2_for_Leopard
Also see...
http://support.apple.com/kb/HT1998

Hello. I began with the DPS. Is it possible to publish a magazine for a limited, specific target group? For example, in one department of a large company? Or to the responsible for various services? If so, how should I do? Thank you for your help.

Hello.
I began with the DPS. Is it possible to publish a magazine for a limited, specific target group? For example, in one department of a large company?
Or to the responsible for various services? If so, how should I do? Thank you for your help.

Short answer is yes.
Click the request for consultation link in Digital Publishing Suite Help | DPS pricing options to receive a price estimate for the DPS license your project.

Hi.bag of my ipad has a magnet that with it the lid closed, is this harmful for ipad??(software or hadware). thank you.

hi.bag of my ipad has a magnet that with it the lid closed, is this harmful for ipad??(software or hadware). thank you.

No. There are magnets in the iPad as well. Try the right side of the screen, around the midle point.

HELLO, I HAVE THE SNOW OF LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ... THANK YOU

HELLO, I HAVE THE SNOW LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, (EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ...) THANK YOU!

Have a look here:
http://applehelpwriter.com/2011/07/24/will-my-old-apps-work-with-lion/
(Like any website owner, I may (or may not) derive compensation from my website)

I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server?

I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server? How do I get rid of this.

Take a look at this link, https://discussions.apple.com/message/16156214#16156214

Hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

Hi vijayanandhtkp,
It sounds like you are getting the Connect to iTunes screen as discussed in this article.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
If so, please check out this article as linked from there.
Use iTunes to restore your iOS device to factory settings - Apple Support
Thank you for using Apple Support Communities.
Nubz

'Backend systems with Release 701 are not supported'

while BBPGETVD transaction is run below error is seen,
'Backend systems with Release 701 are not supported'
Please help to resolve it.

Hi
What is your backend system ECC version?
What is the configuaration in Define back end system?
Note 1313972 - BBPGETVD: Backend system latest release not supported
br
muthu

BBPGETVD throwing an error -Backend system with release 701 are not support

Experts,
After changing the Backend connection from R3 4.6c to ECC6 sysem in our BBPCRM4.0,
the transaction "BBPGETVD" is not working, which is throwing an error as
"Backend system with release 701 are not supported".
Already we have applied some of the notes (822883 &862290)
Thanks
Ahamed

Are you able to replicate other data like plants, product categories from the same backend system or are you facing the same error?
Also please check the logical system and see if they are assigned to the client correctly. (in SPRO settings)
Thanks,
Prashanth

"Charging with this accessory is not supported" But it's my iPhone charger?

When I try to connect my phone to the iPhone charger in the wall socket, and also the USB cable to my iMac it say's "Charging with this accessory is not supported".
What's the deal?
Also when I make calls, I get a freaky alien noise nearly everytime. I can hang up and recall the number and it will work fine, but almost every first call is like this, and no doubt I'm getting charged for it too.
Any help appreciated.

I had a Belkin charger and cord for the iPod Touch 3G because Apple failed to include a necessary AC adapter to charge one of their products, which I thought was cheap being that it is a 300+ device. Anyways, when I plugged my new iPhone 4 in, I could not turn on the sound and it didn't have any sound. When I used the cable that came with the iPhone, I was able to get my sound back. The problem is with the cord. If it is not completely compatible with Apple then you will not be able to charge the iPhone.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3

Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton

HT1386 I have a new Macbook pro. I downloaded all previous Itunes purchases and then sync my IPhone. The New song that I purchased today appear on the IPhone however it will not play. How do I fix the issue with my IPhone?

I have a new Macbook pro. I downloaded all previous Itunes purchases and then sync my IPhone. The New songs that I purchased today appear on the IPhone however it will not play. How do I fix the issue with my IPhone?

Hey Etti101,
I'd start off your troubleshooting process by deleting and redownloading the songs:
If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
Delete the purchased song that is exhibiting the problem from your iTunes library.
Click on the Purchased link in the iTunes Store to view your previously purchased music.
Download your previously purchased song from this list.
via: Songs in iTunes may not play back completely
http://support.apple.com/kb/TS4357
Regards,
Delgadoh

Having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

Similar Messages

Maybe you are looking for