Having trouble with photoshop install

I loaded Creative Cloud but Photoshop is taking over 40 minutes to load. Have to go to Photoshop class in less than 1 hour. Need urgent help

Where is progress bar up to? Like I said above, if it is at the halfway stage, it has probably finished the download, and is stalling at the installation stage. You could try and do some heavy browsing - like watch a YouTube video, to see if your bandwidth is still maxed out.
You must be getting 'very' short on time now, but I would be inclined to give up, restart the computer, and try again. If it were not for the short time frame, I'd also run the Cleaner tool. In Fact I suspect you might need to
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Similar Messages

I'm having trouble with the install of Adobe digital editions

I'm having trouble with the install of Adobe digital editions, how can we fix this? It will begin to dowload it says complete but stops there, no other prompts and if you click the close button it appears that it begins to delete itself. How can i fix this issue?

Hi,
It would be great, if you provide us with the environment where you are trying the install the ADE.
For Example,
- ADE version
- Operating System
- Anti-Virus you are using.
- did you logged in as Admin or user on your computer.
(*any error message you are able to locate/view from Event Viewer- If using Windows OS)
Regards,
Yuvraj.

Still having trouble with Photoshop CC

Hi,
I've continuing to have problem painting in Photoshop, and was wondering if anyone else was encountering the same problem. The issue is not so much a brush lag
as it is a spilt second freeze/stall just before a brush stroke. It doesn't happen continuously, just every few minutes and primarily on thin lines (5-10 pixels) on higher Opacity.
It's very distracting. I'm tried all manner of different things after having gone through forum posts (Photoshop preferences, Wacom driver updates, raising and lowering performance).
Unfortunately nothing seems to remove this momentary freeze. At this stage I can't tell whether it's an issue with Photoshop, the Wacom (an Intros 4), or my iMac. Everything put the Wacom
was purchased within the last two years.
Any thoughts or suggestions would be greatly appreciated.
thank you,
Dave

My Intros 4 is close to five years old, and I'm wondering if it's age is the problem. Overall, Photoshop/Wacom work but it just seems to freeze/delay when I either use a fine pixel size, or go to another section of the screen to paint. I've had an issue like this in any Photoshop version I've run. It began with Photoshop CC and I've not found a solution yet. I feel like i've tried everything but purchase a new Wacom.

Anyone having trouble with Photoshop CS6 with Intuos3?

I've been using CS6 since just after the Beta was released and I like many of the new features. I would probably love the software if not for one huge problem I'm having... no pressure sensitivity with my Intuos3.
My Intuos3 works fine with CS2 and CS3 but not with CS6. I even unistalled all versions of Photoshop except for CS6 in case there was some sort of conflict going on but still no pressure sensitivity. Reinstalled CS3 and it works fine in that application, and still not in CS6.
Does anyone else have this issue? I believe it must be a CS6 issue and not an Intuos3 issue for the fact that my tablet works just fine with previous versions of Photoshop.

No, Wacom tablets are working fine for most people.
Those who've had trouble found that updating the driver or reinstalling the driver solved the problem.
If you continue to have trouble, you probably want to contact Wacom and have them help you troubleshoot the driver.

I'am having trouble with Photoshop Elements 12

In Photo Elements 12 I can open the organizer but not the Editor. I am afraid that if I uninstall and install again I will loose what I have edited on certain photos. Please help, I need to edit a few pictures and I can't do so. Once I open it,
it says Photoshop Elements 12 Editor has stopped working, then Windows starts looking for a solution for the problem, at the end it says, " A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I hit the close program button and it just closes all out. HELP PLEASE!

try using a different browser and a wired (not wireless) internet connection.
or download directly: if you follow all 7 steps, you can download a trial via one of the links on this page using a browser that accepts cookies: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
and activate with your serial number.
if you have a download problem, you didn't follow all 7 steps. typically, failure to meticulously follow steps 1,2 and/or 3 is the problem, but your browser must also allow cookies so that's (a restrictive browser setting) another potential source of problems.

Hi, I'm really having trouble with photoshop suddenly being extremely slow.

In the activity monitor I can see it uses 5GB when opened. Can I run photoshop through an external drive or how can I fix this problem?

Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Having trouble with PS9 installing shared technologies

I have been trying to install Photo elements for a while now and it cannot install the shared technologies need help

YveGS7, what Mylenium mean was to check the exact error that you get into the above article and check what is causing the issue.
Anyway, may i know what error message do you get while installing PSE9?
You might want to check the below article as well.
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

I'm having trouble with Photoshop Elements 2.0.

A 'programming error' has arisen. Does having this Elements version entitle me to an upgrade?

Duplicate post:
http://forums.adobe.com/thread/1398299?tstart=0

Hi Guys and girls, I am having trouble with photoshop just starting up randomly

Every hour or so Photoshop just launches for no reason at all - I can be watching a movie so it's not something I'm doing whilst at the computer - any help on this matter would be most appreciated - I think I've changed a setting accidentally or uninstalled something I may have needed?
Any help on this matter would be so appreciated.
Sincerely
Matty

Contact the app developer for their advice.

Having trouble with post install

After i install Solaris 10 x86 on my Compaq it keeps saying that X server cannot start on display 0 what can i do?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99214)

I am having trouble with the install on my iMac Retna using my account.

This is a new computer that I transferred information from my old computer.
Also, how can I turn off access from that old computer so the new one will be the active account?

You need to properly install everything, not transfer it using migration assistant. On the old computer sign out of the CC app and deactivate.
Mylenium

Having trouble with Photoshop Elements using the Adobe e-mail service

Can anyone offer any helpful information?

Hi Hayzal,
Please refer the KB : http://helpx.adobe.com/elements-organizer/using/sending-photos-media-files-email.html

Im having trouble with the instalation

I get to the part where I eneter my serial number and after entering I cant go any further

Does it take forever for a web page to load ? Or does it take forever for the laptop to connect to the internet connection ?

Trouble with Photoshop Cs6

Having trouble with Photoshop cs6. Brushes that i have downloaded from 3rd party websites were deleted from Photoshop after months of use. We replaced all the brushes 1 by 1 but now there is an extreme lag in almost every function in photoshop that i had never experienced before. Dont know what is going wrong.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I'm using Adobe Photoshop CS5 Extended and am having trouble with it.

I just reinstalled Photoshop CS5 Extended from my original disk because I was having trouble with it. I did do an uninstall before installing. Every time I quit Photoshop I get this message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the ‘Get Info’ command in the Finder to unlock the file or change permissions on the file or enclosing folders." Can you tell me what to do to fix this? I went to get info and made changes to read and write, but it made no difference. Thanks for your help.
Richard

Some folders are hidden in the Finder. Use the "Go to Folder" command for that.
Go menu > Go to Folder, enter:
/Users/YOURUSERNAME/Library/Preferences/Adobe Photoshop CS5 Settings
Gene

Having trouble with photoshop install

Similar Messages

Maybe you are looking for